Actual state and prospects of the development of groundwater monitoring using GIS for the territory of district Galitskiy

Author(s):  
L.I. Davybida ◽  
E.D. Kuzmenko ◽  
R.A. Korniienko

Formulation of the problem. The State Hydrogeological Monitoring Network has to provide the necessary information to manage groundwater resources and prevent negative changes in the geological environment. Currently, there is a negative tendency to decrease the number of observation wells, loss of information about the space-time variability of the hydrogeological regime elements in Ukraine. In conditions of limited funding, an important task is to develop an effective strategy for reforming the hydrogeological monitoring system, taking into account international experience and based on modern geoinformation technologies. Particular attention has to be given to transboundary territories. One of them is the Pripyat River basin, which is characterized by the low level of the State Hydrogeological Monitoring Network representativeness, both in comparison with European Union standards and with the existing groundwater monitoring network of neighbouring Belarus. The purpose of the article is to evaluate the actual state of the hydrogeological observation wells network and optimize it within the territory of the Ukrainian part of the transboundary Pripyat watershed basin. Methodology and materials. The State Scientific and Production Enterprise "Geoinform of Ukraine" database of State Groundwater Monitoring System composition and functioning as well as zoning map under the conditions of water exchange formation in the upper water-bearing level were used for the study. For the studied territory of the water exchange basin of Pripyat, the analysis of density and uniformity of the observation points distribution as well as the variogram analysis of the spatial distribution of groundwater-level altitudes within the study area were carried. For the actual monitoring network, the expected error of the spatial modelling of the groundwater-surface was evaluated. Results. The obtained results of the geostatistical analysis made it possible to substantiate the project wells locations within the water exchange sub-basins to improve the quality of hydrogeological monitoring problem solutions. Scientific novelty. The method of the hydrogeological monitoring network optimization has been improved based on geoinformation and geostatistical approaches and implemented for the Ukrainian part of the Pripyat River basin, taking into account the hydrogeological conditions of the territory and the configuration of the existing network. Practical significance. Optimization and increment of the observation wells network, taking into account the obtained results, will provide the effective functioning of the hydrogeological monitoring system within the Ukrainian part of the Pripyat River basin and will have an economic effect, given that the cost of any measures to improve the groundwater quality and quantity is far more expensive than the monitoring system optimization.


1995 ◽  
Vol 48 (3) ◽  
pp. 221-224
Author(s):  
Zdeněk Urban
Keyword(s):  

2016 ◽  
Author(s):  
Giacomo Giannoccaro ◽  
Armando Ursitti ◽  
Maurizio Prosperi

Author(s):  
Natalia Ivanova ◽  
◽  
Svitlana Mykhailovyna ◽  
Olena Matros ◽  
◽  
...  

There is no doubt that the issues of improving the methodological foundations of internal audit of payments to employees in the context of increased competition in all areas of business, the introduction of modern information technologies in the accounting process are relevant. Salaries are not only a source that ensures the life of employees, but their growth affects the increase in labor productivity and profit of the enterprise. Internal audit allows to ensure high-quality accounting of payments to employees, which is important in determining labor productivity indicators and ways to improve it. The purpose of the article is to substantiate the theoretical and methodological basis with the development of practical recommendations for improving the methodology of internal audit of employee benefits in order to improve the detailed audit content. It has been established that in order to ensure the correct and high-quality organization of internal audit, it is advisable to provide for the establishment of the internal audit service as a separate subdivision, providing the necessary number of accountants and auditors in the staff. The methodology of the internal audit of payroll has been improved in order to provide a detailed explanation of the content of the audit. The main objects of the internal audit of employee benefit calculations have been singled out. The sequence of the employee benefit calculations audit was determined. The internal auditor's working documents were formed: A statement of selective verification of vacation pay accrual and a Statement of violations revealed during the audit of employee benefit calculations. Using new changes and suggestions will allow the company’s internal audit service to cover all aspects of accounting and reporting on employee benefits. Preparation results of the internal audit of payments to employees in the form of proposed working documents will ensure that the results of the audit correspond to the actual state of Affairs at the enterprise and ensure the availability of information during the next audit. Prospects for further research should be carried out in the direction of developing a regulatory framework for internal audit, taking into account industry specifics affecting the economic activity of the enterprise.


Author(s):  
Oleksandra Cherednichenko ◽  

The results of the study of the main elements of unobstructed space are presented and the compliance of the actual state with the regulatory requirements of measures to ensure a safe, comfortable, accessible and informative pedestrian zone of the road network is analyzed. A comparative analysis of the main regulatory requirements for access ramps on the legislation of Ukraine and the European Union is carried out.


2020 ◽  
Vol 26 (9) ◽  
pp. 924-939
Author(s):  
V. A. Tsvetkov ◽  
K. Kh. Zoidov ◽  
K. S. Yankauskas ◽  
Sh. Kobil

The presented study comparatively analyzes indicators of the level of poverty and social inequality in Belarus, Ukraine, Moldova, and the European Union (EU) as a criterion of national economic security.Aim. The study aims to examine existing approaches to determining the level of poverty and its dynamics and to consider suggestions for improving this methodology.Tasks. The authors examine and comparatively analyze approaches and methods for determining the level of poverty and its dynamics in the European Union and the CIS countries that are not members of the Eurasian Economic Union (EAEU).Methods. This study uses the methods of systems analysis, evolutionary-institutional theory, and historical approach.Results. Determining the level of poverty based on the number of citizens with incomes below the subsistence level can lead to misrepresentation of the actual state of this phenomenon. Calculation of poverty indicators based on consumer spending provides more accurate data on the level of poverty in a country where a significant share of the population’s income is generated by remittances from individuals living abroad, which are not reflected in official income statistics. A comparative analysis of poverty dynamics shows that in 2013 the level of poverty in all four examined countries decreased compared to 2006. Poverty dynamics in Russia and Belarus is more synchronized than in Ukraine and Moldova. A common methodology for calculating the level of poverty in all EU countries makes it possible to conduct a more thorough comparative analysis of poverty dynamics and to formulate more accurate recommendations in the field of anti-poverty policies. Based on the identified poverty dynamics in the EU and Russia, it is highly possible that strategic objectives on poverty reduction in the European Union and Russia will not be completed.Conclusions. To exclude the possibility of interested authorities influencing the dynamics of the poverty indicator by changing its threshold values depending on the current economic or political situation, it is necessary to switch to comprehensive assessment of this indicator in Russia. For comparative cross-country data analysis, it is advisable to consider the possibility of creating a Eurasian Statistics Service within the EAEU that would collect statistics and standardize statistical methods among the EAEU member states.


Author(s):  
С.Л. Добрынин ◽  
В.Л. Бурковский

Произведен обзор технологий в рамках концепции четвертой промышленной революции, рассмотрены примеры реализации новых моделей управления технологическими процессами на базе промышленного интернета вещей. Описано техническое устройство основных подсистем системы мониторинга и контроля, служащей для повышения осведомленности о фактическом состоянии производственных ресурсов в особенности станков и аддитивного оборудования в режиме реального времени. Архитектура предлагаемой системы состоит из устройства сбора данных (УСД), реализующего быстрый и эффективный сбор данных от станков и шлюза, передающего ликвидную часть информации в облачное хранилище для дальнейшей обработки и анализа. Передача данных выполняется на двух уровнях: локально в цехе, с использованием беспроводной сенсорной сети (WSN) на базе стека протоколов ZigBee от устройства сбора данных к шлюзам и от шлюзов в облако с использованием интернет-протоколов. Разработан алгоритм инициализации протоколов связи между устройством сбора данных и шлюзом, а также алгоритм выявления неисправностей в сети. Расчет фактического времени обработки станочных подсистем позволяет более эффективно планировать профилактическое обслуживание вместо того, чтобы выполнять задачи обслуживания в фиксированные интервалы без учета времени использования оборудования We carried out a review of technologies within the framework of the concept of the fourth industrial revolution; we considered examples of the implementation of new models of process control based on the industrial Internet of things. We described the technical structure of the main subsystems of the monitoring and control system to increase awareness of the actual state of production resources in particular machine tools and additive equipment in real time. The architecture of the proposed system consists of a data acquisition device (DAD) that implements fast and efficient data collection from machines and a gateway that transfers the liquid part of information to the cloud storage for further processing and analysis. We carried out the data transmission at two levels, locally in the workshop, using a wireless sensor network (WSN) based on ZigBee protocol stack from the data acquisition device to the gateways and from the gateways to the cloud using Internet protocols. An algorithm was developed for initializing communication protocols between a data acquisition device and a gateway, as well as an algorithm for detecting network malfunctions. Calculating the actual machining time of machine subsystems allows us to more efficiently scheduling preventive maintenance rather than performing maintenance tasks at fixed intervals without considering equipment usage


Sign in / Sign up

Export Citation Format

Share Document