Heavy Metal Pollution and its Management

Author(s):  
Ashok K. Rathoure

Environmental degradation has become a major societal issue thanks to uncontrolled anthropogenic activity, besides natural factors. Entry of toxic heavy metals and minerals in human system mainly through contaminated water, food and air, leads to overt and insidious health problems. Heavy metal pollution, a global concern today, can be managed by using bioremediation, an eco-friendly alternative. Bioremediation is one of the most promising technological approaches to the problem of hazardous waste. It is a technology for removing pollution from environment, restoring contaminated site and preventing future pollution. Bioremediation can be performed in situ or ex situ. Microorganisms directly degrade contaminants rather than merely transferring them from one medium to another, employ metabolic degradation pathways and can be used in situ to minimize disturbance of the cleanup site. Hence, microorganisms can be effective, economical and non-disruptive tools for eliminating hazardous chemicals. Its advantage generally outweigh the disadvantage, therefore may be used as management tool.

2020 ◽  
pp. 1013-1036 ◽  
Author(s):  
Ashok K. Rathoure

Environmental degradation has become a major societal issue thanks to uncontrolled anthropogenic activity, besides natural factors. Entry of toxic heavy metals and minerals in human system mainly through contaminated water, food and air, leads to overt and insidious health problems. Heavy metal pollution, a global concern today, can be managed by using bioremediation, an eco-friendly alternative. Bioremediation is one of the most promising technological approaches to the problem of hazardous waste. It is a technology for removing pollution from environment, restoring contaminated site and preventing future pollution. Bioremediation can be performed in situ or ex situ. Microorganisms directly degrade contaminants rather than merely transferring them from one medium to another, employ metabolic degradation pathways and can be used in situ to minimize disturbance of the cleanup site. Hence, microorganisms can be effective, economical and non-disruptive tools for eliminating hazardous chemicals. Its advantage generally outweigh the disadvantage, therefore may be used as management tool.


The Analyst ◽  
2021 ◽  
Author(s):  
Qiwen Bao ◽  
Gang Li ◽  
Zhengchun Yang ◽  
peng pan ◽  
Jun Liu ◽  
...  

The rapid development of industrial technologies continuously increases the heavy-metal pollution of water resources. Recently, portable electrochemical analysis-based devices for detecting heavy-metal ions have attracted much attention due to their...


2019 ◽  
Vol 26 (04) ◽  
pp. 1850179
Author(s):  
BIN ZHAO ◽  
JIA LI ◽  
XIANG YU ◽  
JING ZHANG ◽  
YI REN

Heavy metal pollution endangers seawater and there is urgent need for the development of effective detectors that can provide warning of heavy metal pollution. Anodic stripping voltammetry is applicable for the detection of heavy metal pollution in sea water, but it suffers from two problems that are associated with the mercury electrode used: one is insufficient sensitivity and the other is secondary pollution caused by toxic mercury. In this work, we employed boron-doped diamond electrode as an alternative to mercury electrode for the detection of heavy metals. The BDD electrode was fabricated and its electrochemical properties were ascertained. The results of this work showed that: (1) the electrode prepared has a wide electrochemical window (4.2 V) and low background current ([Formula: see text]A). (2) multiple heavy metals (Pb[Formula: see text], Cd[Formula: see text], Zn[Formula: see text] and Cu[Formula: see text]) in seawater samples are detected simultaneously with the optimized electrode, with high sensitivity and good repeatability. (3) the repeatability of the detection meets the values stipulated in the national standard. The detection period is less than 15[Formula: see text]min, and in situ monitoring of heavy metals in seawater can be achieved by automatic sampling and wireless data transmission.


2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Ali Sayqal ◽  
Omar B. Ahmed

The pollution of toxic heavy metals is considered one of the most important environmental issues which has accelerated dramatically due to changing industrial activities. This review focuses on the most common methods, strategies, and biological approaches of heavy metal bioremediation. Also, it provides a general overview of the role of microorganisms in the bioremediation of heavy metals in polluted environments. Advanced methods of heavy metal remediation include physicochemical and biological methods; the latter can be further classified into in situ and ex situ bioremediation. The in situ process includes bioventing, biosparging, biostimulation, bioaugmentation, and phytoremediation. Ex situ bioremediation includes land farming, composting, biopiles, and bioreactors. Bioremediation uses naturally occurring microorganisms such as Pseudomonas, Sphingomonas, Rhodococcus, Alcaligenes, and Mycobacterium. Generally, bioremediation is of very less effort, less labor intensive, cheap, ecofriendly, sustainable, and relatively easy to implement. Most of the disadvantages of bioremediation relate to the slowness and time-consumption; furthermore, the products of biodegradation sometimes become more toxic than the original compound. The performance evaluation of bioremediation might be difficult as it has no acceptable endpoint. There is a need for further studies to develop bioremediation technologies in order to find more biological solutions for bioremediation of heavy metal contamination from different environmental systems.


The Analyst ◽  
2019 ◽  
Vol 144 (11) ◽  
pp. 3685-3690 ◽  
Author(s):  
Zheng Yao ◽  
Zhiqiang Lai ◽  
Chengchi Chen ◽  
Suting Xiao ◽  
Peihui Yang

Full-colour emissive carbon-dots were prepared and applied in targeting onion CWs for in situ imaging of heavy metal pollution.


2020 ◽  
Author(s):  
Mei Li

<p>Correlations between magnetic enhancement and heavy metal pollution in the urban soils of an industrial area in Shanghai</p><p> </p><p>Mei Li, Zi-Chen He, Xue-Feng Hu</p><p>School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China</p><p> </p><p>Fifty-three topsoil samples (0-5 cm) on the sides of highways surrounding the Bao Steel Company were collected in Baoshan District of Shanghai, Southeast China. Physical-chemical properties and magnetic susceptibility of the topsoils were analyzed. Close to the Yangtze River Estuary, the soils in the study area in the northern part of Baoshan District, Shanghai, were mostly derived from tidal sediments of the estuary. The topsoils were thus alkaline, with pH in a range of 8.0-8.6. The content of organic matter in the topsoils was in a range of 8.0-78.6 mg g<sup>-1</sup>. The content of Fe in the topsoils varied greatly, possibly influenced by the industrial emissions from local metal smelters and power plants. The content of total Fe (Fe<sub>t</sub>) in the topsoils was in a range of 21.0-68.6 mg g<sup>-1</sup>, with an average of 33.7 mg g<sup>-1</sup>; free Fe (Fe<sub>d</sub>), 8.5-25.2 mg g<sup>-1</sup>, with an average of 13.8 mg g<sup>-1</sup>; amorphous Fe (Fe<sub>o</sub>), 2.2-40.4 mg g<sup>-1</sup>, with an average of 13.1 mg g<sup>-1</sup>. Correspondingly, the magnetic signals of the topsoils were significantly enhanced and varied greatly from site to site. Magnetic susceptibility of the topsoils was in a range of 35.3-1722.7×10<sup>-8</sup> m<sup>3</sup> kg<sup>-1</sup>, with an average of 408.5×10<sup>-8</sup> m<sup>3</sup> kg<sup>-1</sup>. The topsoil with the maximum magnetic susceptibility, 1722.7×10<sup>-8</sup> m<sup>3</sup> kg<sup>-1</sup>, was coarse in grain size and located beside some machinery, cement and material factories. Magnetic susceptibility of the topsoils was significantly correlated with Fe<sub>t</sub>, Fe<sub>d</sub> and Fe<sub>o</sub> (r=0.712, 0.777, 0.961, n=53; p<0.01). The contents of toxic heavy metals, Zn, Pb, Cr, Co, Mn and Ni, in the topsoils were also analyzed. It was found that heavy metals were highly accumulated in the topsoils. The contents of Mn, Cr and Ni in the topsoils were more than 2 times the background values in the soils of Shanghai, and Pb and Zn were more than 4 times the background values. Moreover, magnetic susceptibility of the topsoils was positively significantly correlated with the content of Zn, Mn and Ni (r=0.884, 0.819, 0.564, p<0.01; n=53). This suggests that magnetic susceptibility of the topsoils can be used to indicate the degree of heavy metal pollution to some extent. There are many iron smelting factories and coal-fired power plants in the study area, which emitted a high amount of Fe-containing magnetic particles. The small particles had a large surface area and often adsorbed toxic heavy metals. When the particles were settled down on the ground, both magnetic signals and heavy metal contents of the topsoils were enhanced simultaneously. Therefore, the magnetic techniques are a promising means to study and evaluate the pollution of urban soils.</p>


Author(s):  
Baby Abrarunnisa Begum

Heavy metal pollution in the aquatic water bodies via the discharge of various toxic heavy metals from industrial effluents has been a major concern in the present era. Various physical and chemical processes are available to solve this problem of heavy metal pollution. Biosorption is considered as a potential alternative for the removal of heavy metals from waste waters as compared to other conventional processes. In the present work, biosorption of Cu(II), Cr(VI), Pb(II) and Zn(II) ions from aqueous solutions was carried out by using peels of Citrus aurantifolia. The peels were found to be efficient in the biosorption of all four metal ions under study. The biosorption process was found to be influenced by factors like contact time, temperature, pH, turbidity as well as biosorbent dose. Further, the change in characteristics of Citrus aurantifolia after biosorption process was studied by using E-SEM, EDAX and FT-IR analysis. The adsorption isotherm studies revealed that Freundlich isotherm model showed better fir to experimental data as compared to Langmuir isotherm model. The results were found to be significant statistically. The regeneration of biosorbent was carried out by desorption study by using certain eluents.


Sign in / Sign up

Export Citation Format

Share Document