The Necessity of the Study of Humanities in Analysis of Intangible Architectural Heritage of Europe in the 1930s

2019 ◽  
pp. 212-241
Author(s):  
Aban Tahmasebi
Keyword(s):  
Second Step ◽  
Architectural Heritage

The chapter suggests a deepening through the study of humanities in order to define, rectify, and identify the significance of architecture as a methodological base. The case study of the chapter is the monitoring of the works of the Iranian architect Mohsen Foroughi who was employed to build the main architectural scheme of the power flourished in the thirties in Persia. Accordingly, to attain the objective of the chapter, which lies in the epistemology of humanities in relation to architecture, the first step is to define a comparative platform where the works of the Iranian architect could be deciphered amidst the study of the works and opinions of his contemporary colleagues in Europe as Marcello Piacentini. The comparison has been undertaken amidst the two PHDs of the author of the chapter. The second step is to study the Parisian education of the Iranian architect and his inherited Persian culture. Finally, other similarities to Foroughi's works alongside with the presentation of texts upon the branches of humanities related to architecture are taken into scrupulous account.

scholarly journals Rehydration of Dried-Out Specimens: a New Approach

2020 ◽  
Vol 34 (1) ◽  
pp. 73-86
Author(s):  
F. Neisskenwirth
Keyword(s):  
Water Vapor ◽  
Soft Tissue ◽  
Second Step ◽  
Phosphate Solution ◽  
Glycerol Solution ◽  
New Approach ◽  
The Third ◽  
Demineralized Water ◽  
Chemically Induced

Abstract Different procedures are proposed in the literature for the rehydration of dried-out specimens. These procedures vary greatly in their efficiency and application. This work describes a new procedure that is inspired by the literature but that avoids heating the specimens. This method was applied to reconditioning dried-out specimens from a historical collection (Swiss freshwater fishes, bird brains, and bird eyes), stored at the Naturhistorisches Museum Bern in Switzerland. The procedure consists of five steps. The first step is the softening of hardened soft tissue with benzaldehyde and demineralized water. The second step is an indirect rehydration with water vapor. The third step is a chemically induced direct hydration using a trisodium phosphate solution that allows the specimen to swell in size before being washed with water to remove all additives. Finally, the rehydrated specimen is transferred into new preserving fluid. Because the dehydrating properties of ethanol as a preservative are problematic, this paper presents the results of an experimental case study using a glycerol solution as a preservation fluid.

The Contribution of the Turkish Historical Society to the First Stage of the Governmental Program for the Protection of Monuments in Edirne (1933-1941): Preservation Policies and Ideology in the Representation of Architectural Heritage

Belleten ◽  
2012 ◽  
Vol 76 (276) ◽  
pp. 673-690
Author(s):  
Giorgio Gasco
Keyword(s):  
Point Of View ◽  
Visual Narrative ◽  
Ministry Of Education ◽  
Historical Buildings ◽  
Architectural Heritage ◽  
Historical Society ◽  
Emerging Culture ◽  
Historical Heritage ◽  
Scientific Base

The beginning of restoration works on a scientific base in Turkey dates back on 1933 when a specific committee for the protection of monuments (Anıtları Koruma Komisyonu) was officially appointed by the Ministry of Education. The preliminary working phase, carried on under the direction of this committee, was soon distinguished by the clear attempt to visualize the results in order to cast the monuments as national icons. The present paper's aim is to discuss this process of visualization focusing on the case study of a series of works realized in Edime from 1933 to 1944. Apart from the historical value of monuments included in the protection program, the study explores the ideological side of these works stressing their value as a pioneering enterprise of a modem nation that celebrated its emerging culture in the protection and preservation of monuments as a sign of progress and civilization. Edirne's restoration works in fact arouse a great deal of interest in the national press, becoming the best show-case for the effort of the Ministry. By this point of view the study focuses on the key-role played by the Turkish Historical Society in the construction of a visual narrative in the attempt to disseminate the result of these works. In particular the efforts of the Turkish Historical Society in advertising the scheduled interventions found their outlet in the editing of a set of postcards displaying Edirne's historical buildings. The result is a series of powerful images in which a number of buildings are re-casted as the first cultural-historical assets of the Turkish nation. The construction of this visual material was set according to a powerful aesthetic format, clear and instantly recognizable, in order to assure an immediate public reception of the historical heritage of the country. The collection of these images stands as a prime contribution in the construction of the national identity of the country thanks to the production of a collective visual heritage, that, on the ground of an effective popular aesthetics, was able to feature the idea of nation as a landscape of monuments.

Revaluation of Ksar El-Haouita in Laghouat, Algeria

2021 ◽  
Author(s):  
Fatiha Imane Mahcar ◽  
Belkacem Takhi
Keyword(s):  
Morphological Analysis ◽  
Construction Materials ◽  
Architectural Heritage ◽  
Theoretical Underpinning ◽  
Great Resistance ◽  
Basic Principles ◽  
Construction Techniques ◽  
Materials Used ◽  
Local Materials

Algeria has a rich urban and architectural heritage, which presents regional specificities. Once the ksour was a symbol of balance and perfect harmony with its environment, unfortunately today they no longer reflect their former function. The Ksourian architecture, including that of Laghouat is a prestigious heritage of high value; it is the testimony of genius knowledge and the capacity of their occupants to adapt to the difficult environment. The housing is considered the essential core of this architecture it represents the entire composition of the ksar, its design is inspired by the immediate environment and respects ancestral social values. It is characterized by a simple architecture and simple construction techniques which are based on the construction in load-bearing walls, the construction materials used are local materials of great resistance and less expensive. This study addresses the theme revaluation of heritage, particularly our case study ksar El-Haouita which has experienced a neglecting and depopulation due to several factors. The ksar El-Haouita is among the most famous ksour located in the south of Algeria and exactly in the region of Laghouat. It is built with simple materials and techniques of construction. The construction materials used are local materials like stones and lime found in the environmental surroundings of the ksar. The aim of this study is to identify the major causes of the degradation of ksar, also to preserve ksar El-Haouita through specific operations and to improve the tourist attractiveness of ksar El-Haouita in order to promote heritage, to convert it back into sustainable Saharan tourism. Our study based in the first place; on a theoretical underpinning which contains the notions that have a relation with our theme, the problematic and the envisaged objective, then a presentation of ksar followed by a morphological analysis accompanied by identification of the problems to identify the phenomena of damage and its disfigurement. The last step is to treat an aspect for the development of ksar, this aspect is devoted to the restitution of the defensive system (doors, ramparts, ramparts of houses and towers) of the ksar, through a diagnostic and several operations like (rehabilitation and reconstruction). The aim result of this study is to show that the revaluation of the ksar is a very vast operation and proposes interventions that allow the preservation of the ksar and also to understand the elements that help the success of interventions and to put some of the parameters considered as reference elements and basic principles for the operations on the ksar and among these operations it is (the case study, which is the restitution of the defensive system of ksar El-Haouita).

Apodictic Irony and the Production of Well-Structured Uncertainty: Tosafot Gornish and the Talmud as the Political after Kant

Other Others ◽  
2018 ◽  
pp. 105-138
Author(s):  
Sergey Dolgopolski
Keyword(s):  
Early Modern ◽  
Thirteenth Century ◽  
Second Step ◽  
The Political ◽  
Ancient Text ◽  
Early Modernity ◽  
Structured Uncertainty ◽  
Multistep Process ◽  
Aristotelian Tradition

This chapter addresses an early modern instantiation of the effacement of the interpersonal political in the Talmud by conceptions of universal (inter)subjectivity and logical-apodictic reasoning. This process first tacitly erases the interpersonal political in the late ancient Talmud by reducing it to dialectical irony. In a second step, the erasure advances from irony, a Platonic concept, to logical-apodictic reading of it in the Aristotelian tradition. Only when viewed through a post-Kantian lens could it become clear that this was not merely a Platonic interpretation of the late ancient Talmud in early modernity, followed by an Aristotelian interpretation, but rather a complex and multistep process of the effacement of the interpersonal at the advent of intersubjective. The chapter arrives to that result through a case-study of staging and analyzing of a fourteenth century logical commentary on the thirteenth century rhetorical interpretation of a discussion in a late ancient text in the Talmud.

Parametric Modeling as a Tool of Analysis and Interpretation of Built Heritage

2019 ◽  
pp. 366-402
Author(s):  
Marco Vitali ◽  
Roberta Spallone ◽  
Francesco Carota
Keyword(s):  
Parametric Modeling ◽  
Design Criteria ◽  
Architectural Heritage ◽  
Modeling Tools ◽  
The Past ◽  
Built Heritage ◽  
Digital Modeling ◽  
Modeling Software

In this chapter are developed some considerations about the heuristic potentialities of parametric digital modeling as a tool for analyzing and interpreting architectural heritage. Observed that the parametric thinking in architecture could be recognized almost from the origin, new parametric modeling software allows to verify the design criteria of the past. On the basis of previous studies on Baroque vaulted atria, this chapter develops, using parametric modeling tools, a real vocabulary of shapes and their possible combinations, suggested by the architectural literature of the time and the survey of about seventy atria in Turin. This method has been tested on the case study of the lunettes dome in the atrium of Palazzo Carignano.

scholarly journals Machine Learning Generalisation across Different 3D Architectural Heritage

2020 ◽  
Vol 9 (6) ◽  
pp. 379 ◽  
Author(s):  
Eleonora Grilli ◽  
Fabio Remondino
Keyword(s):  
Machine Learning ◽  
Point Cloud ◽  
Machine Learning Techniques ◽  
Training Dataset ◽  
High Complexity ◽  
Architectural Heritage ◽  
Learning Techniques ◽  
Machine Learning Model ◽  
Point Cloud Classification

The use of machine learning techniques for point cloud classification has been investigated extensively in the last decade in the geospatial community, while in the cultural heritage field it has only recently started to be explored. The high complexity and heterogeneity of 3D heritage data, the diversity of the possible scenarios, and the different classification purposes that each case study might present, makes it difficult to realise a large training dataset for learning purposes. An important practical issue that has not been explored yet, is the application of a single machine learning model across large and different architectural datasets. This paper tackles this issue presenting a methodology able to successfully generalise to unseen scenarios a random forest model trained on a specific dataset. This is achieved looking for the best features suitable to identify the classes of interest (e.g., wall, windows, roof and columns).

Design Method for Lattice-Skin Structure Fabricated by Additive Manufacturing

2014 ◽  
Author(s):  
Yunlong Tang ◽  
Yaoyao Fiona Zhao
Keyword(s):  
Complex Geometry ◽  
Lattice Structure ◽  
Design Method ◽  
Mapping Function ◽  
Second Step ◽  
Parameter Distribution ◽  
Skin Structure ◽  
Traditional Design ◽  
Novel Design

Parts with complex geometry structure can be produced by AM without significant increase of fabrication time and cost. One application of AM technology is to fabricate customized lattice-skin structure which can enhance performance of products with less material and less weight. However, most of traditional design methods only focus on design at macro-level with solid structure. Thus, a design method which can generate customized lattice-skin structure for performance improvement and functionality integration is urgently needed. In this paper, a novel design method for lattice-skin structure is proposed. In this design method, FSs and FVs are firstly generated according to FRs. Then, initial design space is created by filling FVs and FSs with selected lattice topology and skin, respectively. In parallel to the second step, initial parameters of lattice-skin structure are calculated based on FRs. Finally, TO method is used to optimize parameter distribution of lattice structure with the help of mapping function between TO’s result and lattice parameters. The design method proposed in this paper is proven to be efficient with case study and provides an important foundation for wide adoption of AM technologies in industry.

Sign in / Sign up

Export Citation Format

Share Document