Experimental Research on Minimum Quantity Lubrication Surface Grinding With Different Cooling and Lubrication Conditions
Given the increasing attention to environmental and health problems caused by machining, the development of an environmentally friendly grinding fluid has become an urgent task. The cooling and lubricating properties of different cooling and lubricating conditions were analyzed. The influence mechanism of nanofluids minimum quantity lubrication (NMQL) on cooling and lubricating effect was revealed with different nanoparticles (MoS2, CNT, ZrO2) and different volume concentrations of MoS2 nanofluids (1%, 2%, 3%). The experimental results showed that the temperature rise (258 °C) and grinding force (Fn=70 N, Ft=27 N) obtained under NMQL grinding were the closest to the flood grinding. The specific grinding energy of MoS2 nanofluids was the lowest, which was 47 J/mm3. When the volume concentration was 2%, the best cooling and lubricating effect was obtained. The surface roughness of the workpiece was the lowest (Ra = 0.283 μm; Rz = 0.424 μm).