scholarly journals Dynamic Water Effect on the High Temperature Stability of Asphalt Mixture

2012 ◽  
Vol 5 ◽  
pp. 352-357 ◽  
Author(s):  
Ming Hao Hou ◽  
Yi Qiu Tan ◽  
Bin Hu
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Viscosity ◽  
Test Method ◽  
Water Effect ◽  
High Temperature Stability ◽  
Air Voids ◽  
Working Together ◽  
Better Than

This paper introduces dynamic water effect into the test, develops a laboratory test device for simulating the dynamic water effect on asphalt pavement, and puts forward a test method of dynamic water effect working together with load, water and temperature. Based on this method, the high temperature stability of seven kinds of asphalt mixtures with the factors of asphalt grade, gradation and air voids are studied. The research shows that the effect of dynamic water can take adverse effect for the high temperature stability of asphalt mixture. The effect degree is different under different factors. It is the most disadvantaged when the air voids of the mixture is near 10%, the skeleton structure gradation of mixture is better than the suspended structure at the most disadvantage air voids, and the mixture made of high viscosity asphalt is more affected when the temperature is higher.

Influence of Double-Doped Admixtures on Asphalt Mixture Performance

2012 ◽  
Vol 557-559 ◽  
pp. 329-333
Author(s):  
Zhong Run Zheng ◽  
Chao Zhao ◽  
Yi Feng Zhao ◽  
Pei Song
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Rutting Resistance ◽  
Splitting Test ◽  
Improvement Effect ◽  
Low Temperature Cracking ◽  
Better Than

This paper introduces an asphalt mixture that mixed with different admixtures, rutting resistance agent and lignin fiber, at the same time. Rutting test and freeze-thaw splitting test are used to analyze rutting resistance on the high temperature and low temperature cracking of the asphalt mixture. The experiments with different mixes material composition are conducted to analysis various properties of the two admixtures on the mixture, especially the high temperature stability, low temperature crack resistance and the law of improvement effect. In addition, the experiments also determine the optimal asphalt content of different type of mixtures. The results showed that the single-doped KTL rutting resistance or lignin fibers have some improvement in water temperature performance of asphalt mixture, stability improvement of double-doped admixture asphalt mixture is better than the single-doped asphalt mixture, such as KTL rutting resistance agents and lignin fibers

Research of Asphalt Mixtures High Temperature Stability

2013 ◽  
Vol 405-408 ◽  
pp. 1871-1874
Author(s):  
Gen Chuan Luo
Keyword(s):  
High Temperature ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Influence Factors ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
High Temperature Stability ◽  
Air Voids ◽  
Asphalt Content ◽  
The Stability

Rutting is one of the most hazardous damage form of asphalt pavement.But,owing to itself inherent in the viscoelastic characteristics of asphalt mixture,the diversity of factors influencing the high temperature of asphalt pavement anti-rutting performance and the complexity of rut formation,this three reasons make ruts become a worldwide problem.Starting from the mixture.This article analyzed the influence factors of the rutting resistance of asphalt mixture at high temperature.For asphalt mixture, through the experimental data, the research status at home and abroad, from the type of asphalt, asphalt content, grading of aggregates and air voids four aspects analysis and study the influence factors of the stability of asphalt mixture at high temperature.

High Temperature Stability of Asphalt Mixture Research

2013 ◽  
Vol 361-363 ◽  
pp. 1847-1850
Author(s):  
Hong Bao Li ◽  
Yan Qing An
Keyword(s):  
High Temperature ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Influence Factors ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Air Voids ◽  
Asphalt Content ◽  
Viscoelastic Characteristics ◽  
The Stability

Rutting is one of the most hazardous damage form of asphalt pavement.But,owing to itself inherent in the viscoelastic characteristics of asphalt mixture,the diversity of factors influencing the high temperature of asphalt pavement anti-rutting performance and The complexity of rut formation,this three reasons make ruts become a worldwide problem.Starting from the mixture, This article analyzed the influence factors of the rutting resistance of asphalt mixture at high temperature.For asphalt mixture, through the experimental data, the research status at home and abroad, from the type of asphalt, asphalt content, grading of aggregates and air voids four aspects analysis and study the influence factors of the stability of asphalt mixture at high temperature.

Experimental Study of Typical Graded Asphalt Mixture about Dynamic Stability at High Temperature

2016 ◽  
Vol 858 ◽  
pp. 300-304
Author(s):  
Zhen Fu Chen ◽  
Dan Wu ◽  
Qiu Wang Tao ◽  
Yuan Chu Gan
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
High Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Specimen Thickness ◽  
High Temperature Stability ◽  
Change Trend ◽  
Comparison And Analysis ◽  
The Stability

The high temperature stability of AC-16, AC-13, AC-20 under specimen thickness of 5cm and 6cm is studied through indoor asphalt mixture high rutting test, Through comparison and analysis about experimental data, it is found that the stability of AC-16, AC-13, AC-20 asphalt mixture at high- temperature decreases in turn. It is shown that thickness changes did not affect the change trend of the high temperature stability under gradation change, and the stability of AC-16 at high-temperature is the best, the AC-13 is second and the AC-20 is less.

A Study of Polyurethane Rubber Composite Modified Asphalt Mixture

2014 ◽  
Vol 941-944 ◽  
pp. 324-328 ◽  
Author(s):  
Zhong Ping Yao ◽  
Meng Li ◽  
Wei Liu ◽  
Zhen Bei Chen ◽  
Rong Hui Zhang
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Damage Resistance ◽  
Modified Asphalt ◽  
Rubber Composite ◽  
Marshall Test ◽  
Composite Modification ◽  
Temperature Crack

Use polyurethane rubber composite modified asphalt.Through the Marshall test and rutting test, test of polyurethane rubber asphalt mixture high temperature stability, low temperature crack resistance and water damage resistance, verify the composite modification advantages.

Impact of Rheological Properties of Fiber Asphalt Mortar on Mixture Road Performance

2013 ◽  
Vol 734-737 ◽  
pp. 2287-2291 ◽  
Author(s):  
De Dong Guo
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Fiber Content ◽  
High Temperature Stability ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Asphalt Mortar

Fiber asphalt concrete has been more and more widely used in highway construction. For analyzing high and low temperature performance of fiber asphalt mixture, rheological properties of fiber asphalt mortar were studied through indoor test. Impact of Rheological properties of the fiber asphalt mortar on high temperature and low temperature properties of asphalt mixture was analyzed. Results showed that the larger fiber content was, the better performance of asphalt mixture's high temperature stability, fiber asphalt mortar rut factor and rutting tests results of asphalt mixture were linear correlation, reflecting the high temperature performance of asphalt mixture; With the increase of fiber content, variation of stiffness modulus, creep rate indicators and mixture low temperature performance was consistent, and rheological properties of fiber asphalt mortar could characterize low temperature performance of asphalt mixture.

scholarly journals Study on Laboratory Experimental Pavement Performances of SEAM Modified Asphalt Mixture

2019 ◽  
Vol 136 ◽  
pp. 03010
Author(s):  
Ma Qingna ◽  
Zhao Zhiqin ◽  
Xu Qian ◽  
Sun Feng
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Water Stability ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
The Road ◽  
Road Performance ◽  
Property Index

Adding sulphur dilution asphalt modifier SEAM to asphalt mixture is not only a modifier of asphalt mixture, but also an additive of asphalt mixture. When the modifier is added into the asphalt mixture, the road performance of the asphalt mixture can be improved. This paper studies SEAM modified asphalt mixture the Marshall property index, temperature stability, Water stability and fatigue feature in the Laboratory. On the based of the result of the experiment and analysis, SEAM can improve the high temperature stability, Water stability and fatigue feature. But the low temperature stability can’t improve.

scholarly journals Experimental Study on the Performance Decay of Permeable Asphalt Mixture in Seasonally Frozen Regions under Freeze-Thaw Cycles

2020 ◽  
Vol 12 (7) ◽  
pp. 2966 ◽  
Author(s):  
Chao Chai ◽  
Yong-Chun Cheng ◽  
Yuwei Zhang ◽  
Yu Chen ◽  
Bing Zhu
Keyword(s):  
Acoustic Emission ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Air Voids ◽  
Particle Loss ◽  
Seasonal Freezing ◽  
Freeze Thaw ◽  
Splitting Test ◽  
Air Void

This paper focuses on the freeze-thaw cycles (F-T cycles) resistance of porous asphalt mixture (PAM) with different air voids in order to explore the gradation of the PAM suitable for seasonal freezing regions. Three sets of PAMs with 18%, 21%, and 25% air voids were designed. After 0–20 F-T cycles, the effects of F-T cycles on the performance degradation of three groups of PAMs were studied by performing a low-temperature splitting test with acoustic emission technology, a normal temperature splitting test, a compression test, a Cantabro particle loss test, and a dynamic creep test. The results show that the damage process of PAM caused by multiple F-T cycles could be more clearly defined by acoustic emission parameters. In addition, the larger the air void, the smaller its indirect tensile strength and compression strength, and the worse its particle loss resistance and high-temperature stability, which made the adverse effect of F-T cycles more significant. Therefore, the air void of PAM used in seasonal freezing regions is suggested to be less than 21%.

Sign in / Sign up

Export Citation Format

Share Document