The Influence of Rheology for Different Superplasticizer on High Alumina Low Cement Castable

2012 ◽  
Vol 174-177 ◽  
pp. 579-587
Author(s):  
Ting Shu He ◽  
Zhu Kai Li ◽  
Xiao Yan Huang

Fixed the composition of matrix slurry in low cement castable, added different additives such as STPP, KS-JS70, GLENIUX, Rheoplus, LMS-P, determined the slurry viscosity by using the NXS-11A rotary viscometer, analysised the rheological properties of the different matrix paste.Studies have shown that: there is a certain influence on the slurry rheology for different species and dosage, and there is the appropriate dosage. Analyzed the mechanisms of different admixtures on the rheological properties of slurry on theoretical.

2003 ◽  
Vol 2 (4) ◽  
pp. 72-79
Author(s):  
V. F. Kiritchuk ◽  
V. Yu. Shirokov

The aim of investigation is to study blood rheological properties in patients with chronic generalised periodontitis combined with gastrointestinal tract disturbances. 205 patients have been examined including those with erosive ulcerous involvement of gastroduodenal area — 51, with stomach ulcer and duodenal ulcer — 62, with chronic colitis — 39, with nonspecific ulcer colitis — 53. Blood viscosity properties, indices of erythrocyte aggregation and deformability, rate of oxygen delivery to tissues have been evaluated by rotary viscometer АBR-2 (Russia). It has been revealed that blood rheological properties in patients with chronic generalised periodontitis combined with gastrointestinal tract disturbances had been disturbed, that was accompanied with the blood viscosity rise, erythrocyte aggregation increase and with the decrease of deformability and rate of oxygen delivery to tissues. The degree of violations in blood rheology indices was mostly expressed under chronic and plural erosions of gastroduodenal area, duodenal ulcer and severe course of chronic nonspecific ulcer colitis.


2020 ◽  
Vol 73 (4) ◽  
pp. 696-699
Author(s):  
Lena L. Davtian ◽  
Galyna P. Kukhtenko ◽  
Alona S. Voronkina ◽  
Viktoria V. Kudria

The aim of the present research was to investigate the rheological properties of the medicinal syrup for oral administration with glucosamine hydrochloride and levocarnitine. Matherials and methods: Coefficient of the dynamic flow (at shear rates of 3,49 and 10,3 s -1, as well as at shear rates of 27.2 and 149.0 s-1), mechanical stability, the index of destruction and restoration were studied. The rheological (structural-mechanical) properties of the samples were determined using a Rheolab QC rotary viscometer (AntonPaar, Austria) with coaxial cylinders CC27 / S-SN29766. The rheological parameters were studied at the temperature 20±0,5 °С. Results: It is established that the syrup has weakly expressed plastic viscous and thixotropic properties (the hysteresis area for the syrupis 1710.19 Pas/s). Such results characterize the system as a reopex. Conclusions: The results of the study enables classification of the research object as system with a low degree of fluidity. Such dependence is typical for systems of the Newtonian type of flow and characterizes the syrup under investigation as a weakly structured disperse system.


Author(s):  
A.B. Surovtsev ◽  
◽  
I.A. Mandzyuk ◽  
D.O. Chervakov ◽  
M.F. Seferova ◽  
...  

We present the results of creation of paste-like fuel compositions with a high degree of filling (up to 90 wt.%) and investigation of their rheological properties. The developed composition contained the following components: a polymer matrix (type SNBR-N butadiene rubber) and a mixture of inorganic fillers (preliminarily surface-modified highly disperse potassium chloride, that was microencapsulated by using oligomeric products of polyehtyleneterepthalate glycerolize, and highly dispersed aluminum powder. A surface-active compound (oligomeric polioxypropylene glycol) and plasticizers of different natures were used as additional components, which were introduced in order to increase the degree of filling of the resulting paste-like compositions while maintaining a low level of their viscosity. The dynamic viscosity of the compositions was evaluated in the range of the shear stresses of 1 to 30 kPa and the temperatures of 293 to 323 K by using a rotary viscometer (cone–plane system). The viscosity of the composition which is a mixture of saturated and unsaturated methyl ester fatty acids at the maximum degree of filling (90 wt.%) was at the level of viscosity of the individual binder.


2021 ◽  
Vol 22 (4) ◽  
pp. 40-49
Author(s):  
A.N. Martekha ◽  
◽  
V.N. Andreev ◽  

Rheological properties are an important parameter for the quality of mayonnaise. This article in-vestigated the effect of adding olive oil on the rheological properties and color change of mayon-naise. The influence of the storage time of mayonnaise in the refrigerator on the change in rheo-logical properties was also investigated. Mayonnaise was prepared on a laboratory rotary disperser of the Turrex type with a rotor / stator system with a rotor speed range (10000-30000 rpm) at room temperature. Mayonnaise contains 75% oil with varying proportions of sunflower oil and ol-ive oil. Rheological measurements were carried out on a Brookfield rotary viscometer with con-centric cylinders at temperatures of 10 ° C and 25 ° C. Based on the data obtained, the consistency coefficient of the rheological parameters, the flow index and the apparent viscosity were calculat-ed. The color of the test samples of mayonnaise was measured using a three-color colorimeter. All mayonnaise samples exhibit non-Newtonian pseudoplastic flow with a defined thixotropic loop area. Research results have shown that the addition of olive oil affects the rheological properties and color of mayonnaise. The addition of olive oil to the oil phase of mayonnaise reduces shear stress, apparent viscosity, consistency factor and color change at 25 ° C and 10 ° C. When storing mayonnaise in the refrigerator for 15 days, the rheological parameters change. Sunflower oil may-onnaise (75%) has the highest value (L), which means it is measured instrumentally as the bright-est.


2002 ◽  
Vol 730 ◽  
Author(s):  
Mikyong Yoo ◽  
Curtis W. Frank

AbstractWe describe here the interaction of poly(vinylidene fluoride) (PVDF) with graphite based on the rheological behavior of the slurries and the surface morphology of PVDF in the final composite anode. The rheological properties of slurries show the interaction between graphite and PVDF with the viscosity varying over six orders of magnitude for different graphite particles. We correlated the suspension viscosity with the final film properties. The homogeneity of the PVDF distribution in the final composite film increases as the slurry viscosity increases. The interaction between graphite and PVDF is altered through the chemical properties of polymer such as molecular weight and functionality, leading to an improved morphology of PVDF.


Refractories ◽  
1981 ◽  
Vol 22 (3-4) ◽  
pp. 182-186
Author(s):  
I. I. Shakhov ◽  
Y. V. Matveev

1984 ◽  
Vol 32 ◽  
Author(s):  
L. H. Cadoff ◽  
D. Smith-Magowan ◽  
D. E. Harrison ◽  
J. M. Pope

ABSTRACTCoagulation of HLW feed slurry can result from the interaction between acid metal cations and soluble silicates/silica. Feed slurry viscosity depend on a number of factors: (a) concentration and composition of the waste slurry electrolytes, (b) type and concentration of silica and silicate constituents in the glass former, (c) pH of the slurry feed, and (d) degree and order of mixing of the glass former with the waste sludge. Coagulation can be avoided by mixing to achieve a good dispersal of glass former globules in the waste slurry even when pH and electrolyte content favor it.


Author(s):  
KRAVCHENKO Mykhailo ◽  
ROMANOVSKA Olha ◽  
MARUSYAK Tetiana

Background. The analysis of modern literature sources shows that the impro­vement of existing biscuit technologies is aimed primarily at the use of various non-traditional raw materials to regulate the nutritional value and increase the stability of sponge dough during production and baking.Thus, the production of biscuits from spelt flour is one of the most promising areas of its use, as it meets the technological properties of this type of product. The aim of the work is to study the rheological properties of sponge dough from a mixture of premium wheat flour and spelt flour. Materials and methods.The object of the study is the dough for the main biscuit and with the replacement of 10, 20, 30, 40, 50 % of high-grade wheat flour (HGWF) with spelt flour (SF). The study was performed on a rotary viscometer Reotest-2 on a system of cylin­ders S, S3 at a temperature of 20 °C. Shear stress and viscosity are calculated by formulas for the corresponding values of shear rate. The whipping of the sponge dough was defined as the ratioof thevolume of the egg-sugar mixture after beating to the volume of the mixture after adding the flour mixture and stirring for 15 с(%). The stability of the sponge dough (SSD) with the addition of flour mixtures was determined as the ratio of the height of the foam after aging for 15· 60 сat a temperature of 18–20 °C to the total height of the foam column of the sample, expressed as a percentage. Results. The study found a general trend to reduce the viscosity of sponge dough for test specimens depending on the shear rate relative to control. Thus, for the studied shear deformations from 0.167 c-1 to 24.3 c-1, the viscosity of the sponge dough of the control sample decreases from 55.50to 3.26 Pa ∙ с. Replacing wheat flour with spelt flour in the amount of 10 to 50 % helps to reduce the viscosity of sponge dough from 55.50 to 1.55 Pa ∙ с. When studying the dependence of the effective viscosity of the dough for the main biscuit on the content of SF at a fixed shear rate of 24.3 c-1, two areas were identified –in the range of 0–30 and 30–50 % replacement of wheat flour for SF, for which there is a different intensity of viscosity reduction: by 38.3 and 2.4%, respectively. The increase in the stability of sponge cake dough by 3.6–43.6% in the studied samples with respect to control was due to the addition of spelt flour. Conclusion. The use of spelt flour in the composition of the main sponge cake helps to reduce the viscosity, but increases the whipping and stability of the biscuit dough, which is positive for the subsequent molding and baking.


Sign in / Sign up

Export Citation Format

Share Document