Turbine Generator Fault Diagnosis Based on Time Domain Average Laplace Wavelet

2012 ◽  
Vol 220-223 ◽  
pp. 701-704
Author(s):  
Xue Ping Ren ◽  
Jin Lei Wang
Keyword(s):  
Fourier Transform ◽  
Fault Diagnosis ◽  
Correlation Coefficient ◽  
Time Domain ◽  
Wavelet Filter ◽  
Turbine Generator ◽  
Filter Theory ◽  
Diagnosis Method ◽  
The Time Domain ◽  
Correlation Filtering

In view of turbine generator vibration abnormal,introduces fault diagnosis method based on time domain average Laplace wavelet analysis, and successfully applied to the site. Briefly introduced the time domain average and Laplace wavelet filter theory and algorithms, first use time domain average extract the cycle signal component from complex signal.then use Laplace wavelet correlation filtering to get correlation coefficient, then get characteristic frequency from the correlation coefficient of Fourier transform in order to achieve fault diagnosis. Finally it verified the effectiveness of this method through an instance of the fault diagnosis of turbine generator bearings not verify.

scholarly journals A Multimodal Feature Fusion-Based Deep Learning Method for Online Fault Diagnosis of Rotating Machinery

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3521 ◽  
Author(s):  
Funa Zhou ◽  
Po Hu ◽  
Shuai Yang ◽  
Chenglin Wen
Keyword(s):  
Deep Learning ◽  
Fault Diagnosis ◽  
Real Time ◽  
Time Domain ◽  
Feature Fusion ◽  
Rotating Machinery ◽  
Time Domain Data ◽  
Diagnosis Method ◽  
The Time Domain ◽  
Potential Frequency

Rotating machinery usually suffers from a type of fault, where the fault feature extracted in the frequency domain is significant, while the fault feature extracted in the time domain is insignificant. For this type of fault, a deep learning-based fault diagnosis method developed in the frequency domain can reach high accuracy performance without real-time performance, whereas a deep learning-based fault diagnosis method developed in the time domain obtains real-time diagnosis with lower diagnosis accuracy. In this paper, a multimodal feature fusion-based deep learning method for accurate and real-time online diagnosis of rotating machinery is proposed. The proposed method can directly extract the potential frequency of abnormal features involved in the time domain data. Firstly, multimodal features corresponding to the original data, the slope data, and the curvature data are firstly extracted by three separate deep neural networks. Then, a multimodal feature fusion is developed to obtain a new fused feature that can characterize the potential frequency feature involved in the time domain data. Lastly, the fused new feature is used as the input of the Softmax classifier to achieve a real-time online diagnosis result from the frequency-type fault data. A simulation experiment and a case study of the bearing fault diagnosis confirm the high efficiency of the method proposed in this paper.

Induction Motor Fault Diagnosis Using Voltage Spectrum of Auxiliary Winding and Lissajous Curve of its Park Components

2013 ◽  
Vol 805-806 ◽  
pp. 963-979 ◽  
Author(s):  
Lamiaâ El Menzhi ◽  
Abdallah Saad
Keyword(s):  
Fourier Transform ◽  
Fault Diagnosis ◽  
Frequency Domain ◽  
Induction Motor ◽  
Discrete Fourier Transform ◽  
Time Domain ◽  
New Method ◽  
Spectrum Simulation ◽  
Simulation Results ◽  
The Time Domain

In this paper, a new method for induction motor fault diagnosis is presented. It is based on the so-called an auxiliary winding voltage and its Park components. The auxiliary winding is a small coil inserted between two of the stator phases. Expressions of the inserted winding voltage and its Park components are presented. After that, discrete Fourier transform analyzer is required for converting the signals from the time domain to the frequency domain. A Lissajous curve formed of the two Park components is associated to the spectrum. Simulation results curried out for non defected and defected motor show the effectiveness of the proposed method.

scholarly journals Experimental Investigation and Fault Diagnosis for Buckled Wet Clutch Based on Multi-Speed Hilbert Spectrum Entropy

Entropy ◽  
2021 ◽  
Vol 23 (12) ◽  
pp. 1704
Author(s):  
Jiaqi Xue ◽  
Biao Ma ◽  
Man Chen ◽  
Qianqian Zhang ◽  
Liangjie Zheng
Keyword(s):  
Fault Diagnosis ◽  
Time Domain ◽  
Vibration Signal ◽  
Bench Test ◽  
Vehicle Performance ◽  
Vibration Signals ◽  
Hilbert Spectrum ◽  
Wet Clutch ◽  
Diagnosis Method ◽  
The Time Domain

The multi-disc wet clutch is widely used in transmission systems as it transfers the torque and power between the gearbox and the driving engine. During service, the buckling of the friction components in the wet clutch is inevitable, which can shorten the lifetime of the wet clutch and decrease the vehicle performance. Therefore, fault diagnosis and online monitoring are required to identify the buckling state of the friction components. However, unlike in other rotating machinery, the time-domain features of the vibration signal lack efficiency in fault diagnosis for the wet clutch. This paper aims to present a new fault diagnosis method based on multi-speed Hilbert spectrum entropy to classify the buckling state of the wet clutch. Firstly, the wet clutch is classified depending on the buckling degree of the disks, and then a bench test is conducted to obtain vibration signals of each class at varying speeds. By comparing the accuracy of different classifiers with and without entropy, Hilbert spectrum entropy shows higher efficiency than time-domain features for the wet clutch diagnosis. Thus, the classification results based on multi-speed entropy achieve even better accuracy.

JOINT INTERPRETATION OF AIRBORNE ELECTROMAGNETIC DATA IN THE TIME DOMAIN AND FREQUENCY DOMAIN

2018 ◽  
Vol 12 (7-8) ◽  
pp. 76-83
Author(s):  
E. V. KARSHAKOV ◽  
J. MOILANEN
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Time Domain ◽  
Frequency Interval ◽  
Single Spectrum ◽  
Simultaneous Inversion ◽  
Homogeneous Half Space ◽  
Time Domain Data ◽  
The Time Domain

Тhe advantage of combine processing of frequency domain and time domain data provided by the EQUATOR system is discussed. The heliborne complex has a towed transmitter, and, raised above it on the same cable a towed receiver. The excitation signal contains both pulsed and harmonic components. In fact, there are two independent transmitters operate in the system: one of them is a normal pulsed domain transmitter, with a half-sinusoidal pulse and a small "cut" on the falling edge, and the other one is a classical frequency domain transmitter at several specially selected frequencies. The received signal is first processed to a direct Fourier transform with high Q-factor detection at all significant frequencies. After that, in the spectral region, operations of converting the spectra of two sounding signals to a single spectrum of an ideal transmitter are performed. Than we do an inverse Fourier transform and return to the time domain. The detection of spectral components is done at a frequency band of several Hz, the receiver has the ability to perfectly suppress all sorts of extra-band noise. The detection bandwidth is several dozen times less the frequency interval between the harmonics, it turns out thatto achieve the same measurement quality of ground response without using out-of-band suppression you need several dozen times higher moment of airborne transmitting system. The data obtained from the model of a homogeneous half-space, a two-layered model, and a model of a horizontally layered medium is considered. A time-domain data makes it easier to detect a conductor in a relative insulator at greater depths. The data in the frequency domain gives more detailed information about subsurface. These conclusions are illustrated by the example of processing the survey data of the Republic of Rwanda in 2017. The simultaneous inversion of data in frequency domain and time domain can significantly improve the quality of interpretation.

Separating Multiple Moving Sources by Microphone Array Signals for Wayside Acoustic Fault Diagnosis

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Wei Xiong ◽  
Qingbo He ◽  
Zhike Peng
Keyword(s):  
Fault Diagnosis ◽  
Time Domain ◽  
Feature Matching ◽  
Matching Pursuit ◽  
Microphone Array ◽  
Time Frequency ◽  
Moving Sources ◽  
The Time Domain ◽  
Envelope Spectrum ◽  
Threshold Setting

Wayside acoustic defective bearing detector (ADBD) system is a potential technique in ensuring the safety of traveling vehicles. However, Doppler distortion and multiple moving sources aliasing in the acquired acoustic signals decrease the accuracy of defective bearing fault diagnosis. Currently, the method of constructing time-frequency (TF) masks for source separation was limited by an empirical threshold setting. To overcome this limitation, this study proposed a dynamic Doppler multisource separation model and constructed a time domain-separating matrix (TDSM) to realize multiple moving sources separation in the time domain. The TDSM was designed with two steps of (1) constructing separating curves and time domain remapping matrix (TDRM) and (2) remapping each element of separating curves to its corresponding time according to the TDRM. Both TDSM and TDRM were driven by geometrical and motion parameters, which would be estimated by Doppler feature matching pursuit (DFMP) algorithm. After gaining the source components from the observed signals, correlation operation was carried out to estimate source signals. Moreover, fault diagnosis could be carried out by envelope spectrum analysis. Compared with the method of constructing TF masks, the proposed strategy could avoid setting thresholds empirically. Finally, the effectiveness of the proposed technique was validated by simulation and experimental cases. Results indicated the potential of this method for improving the performance of the ADBD system.

IDENTIFICATION OF INTERHARMONICS BASED ON WAVELET PACKET TRANSFORM

2021 ◽  
Vol 3 (1) ◽  
pp. 031-036
Author(s):  
S. A. GOROVOY ◽  
◽  
V. I. SKOROKHODOV ◽  
D. I. PLOTNIKOV ◽  
◽  
...  
Keyword(s):  
Fourier Transform ◽  
Simulation Model ◽  
Frequency Domain ◽  
Time Domain ◽  
Wavelet Packet ◽  
High Accuracy ◽  
Wavelet Packet Transform ◽  
Mathematical Apparatus ◽  
Nonlinear Load ◽  
The Time Domain

This paper deals with the analysis of interharmonics, which are due to the presence of a nonlinear load. The tool for the analysis was a mathematical apparatus - wavelet packet transform. Which has a number of advantages over the traditional Fourier transform. A simulation model was developed in Simulink to simulate a non-stationary non-sinusoidal mode. The use of the wavelet packet transform will allow to determine the mode parameters with high accuracy from the obtained wavelet coefficients. It also makes it possible to obtain information, both in the frequency domain of the signal and in the time domain.

A Deep Neural Network Model for Learning Runtime Frequency Response Function Using Sensor Measurements

2021 ◽  
Author(s):  
Yongzhi Qu ◽  
Gregory W. Vogl ◽  
Zechao Wang
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Fourier Transform ◽  
Time Domain ◽  
Frequency Response Function ◽  
Frequency Component ◽  
Operating Conditions ◽  
Input Output ◽  
The Fourier Transform ◽  
The Time Domain

Abstract The frequency response function (FRF), defined as the ratio between the Fourier transform of the time-domain output and the Fourier transform of the time-domain input, is a common tool to analyze the relationships between inputs and outputs of a mechanical system. Learning the FRF for mechanical systems can facilitate system identification, condition-based health monitoring, and improve performance metrics, by providing an input-output model that describes the system dynamics. Existing FRF identification assumes there is a one-to-one mapping between each input frequency component and output frequency component. However, during dynamic operations, the FRF can present complex dependencies with frequency cross-correlations due to modulation effects, nonlinearities, and mechanical noise. Furthermore, existing FRFs assume linearity between input-output spectrums with varying mechanical loads, while in practice FRFs can depend on the operating conditions and show high nonlinearities. Outputs of existing neural networks are typically low-dimensional labels rather than real-time high-dimensional measurements. This paper proposes a vector regression method based on deep neural networks for the learning of runtime FRFs from measurement data under different operating conditions. More specifically, a neural network based on an encoder-decoder with a symmetric compression structure is proposed. The deep encoder-decoder network features simultaneous learning of the regression relationship between input and output embeddings, as well as a discriminative model for output spectrum classification under different operating conditions. The learning model is validated using experimental data from a high-pressure hydraulic test rig. The results show that the proposed model can learn the FRF between sensor measurements under different operating conditions with high accuracy and denoising capability. The learned FRF model provides an estimation for sensor measurements when a physical sensor is not feasible and can be used for operating condition recognition.

Sign in / Sign up

Export Citation Format

Share Document