Point Cloud Process of Laser Scanning with a Mathematical Noise Model

2013 ◽  
Vol 275-277 ◽  
pp. 2537-2542
Author(s):  
Na Meng ◽  
Jian Zhong Zhang ◽  
Bao Qing Dai ◽  
Xin Li Chen
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Random Noise ◽  
Geometric Error ◽  
Noise Model ◽  
Redundant Data ◽  
Data Process ◽  
Noise Data ◽  
Point Data ◽  
Noise Error

Considering the unreasonable noise of laser scanning point data during measuring, which causes the reconstructed curve and surface rough, some problems are analyzed to deal with noise. The mathematical noise model on scanning point cloud is proposed, which consists of deterministic and random noise error, and the random error mainly consists of geometric error and measurement one. The data process is proposed to reduce noise and to simplify data. The noise process consists of obvious noise removed, random filter algorithm and data fairing with an optimized correction value. Due to redundant data about mass point cloud, method of combining deviation parameters with allowed angle is proposed to simplify point cloud. The experiments show that the proposed method has many obvious advantages than a single algorithm of data processing, such as all sorts of noise data can be removed respectively, mass data can be streamlined. And the proposed algorithm has the advantages of high reservation of curve and surface reconstruction of point cloud.

scholarly journals A New Adaptive Method for the Extraction of Steel Design Structures from an Integrated Point Cloud

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3416
Author(s):  
Pawel Burdziakowski ◽  
Angelika Zakrzewska
Keyword(s):  
Data Integration ◽  
Point Cloud ◽  
Laser Scanning ◽  
Detection Threshold ◽  
Measurement Data ◽  
Steel Structures ◽  
Adaptive Method ◽  
Edge Extraction ◽  
Geometric Structures ◽  
Redundant Data

The continuous and intensive development of measurement technologies for reality modelling with appropriate data processing algorithms is currently being observed. The most popular methods include remote sensing techniques based on reflected-light digital cameras, and on active methods in which the device emits a beam. This research paper presents the process of data integration from terrestrial laser scanning (TLS) and image data from an unmanned aerial vehicle (UAV) that was aimed at the spatial mapping of a complicated steel structure, and a new automatic structure extraction method. We proposed an innovative method to minimize the data size and automatically extract a set of points (in the form of structural elements) that is vital from the perspective of engineering and comparative analyses. The outcome of the research was a complete technology for the acquisition of precise information with regard to complex and high steel structures. The developed technology includes such elements as a data integration method, a redundant data elimination method, integrated photogrammetric data filtration and a new adaptive method of structure edge extraction. In order to extract significant geometric structures, a new automatic and adaptive algorithm for edge extraction from a random point cloud was developed and presented herein. The proposed algorithm was tested using real measurement data. The developed algorithm is able to realistically reduce the amount of redundant data and correctly extract stable edges representing the geometric structures of a studied object without losing important data and information. The new algorithm automatically self-adapts to the received data. It does not require any pre-setting or initial parameters. The detection threshold is also adaptively selected based on the acquired data.

The Advantages of Using Laser Scanners in Surveying in Protected Sites

2015 ◽  
pp. 382-402
Author(s):  
Gülhan Benli
Keyword(s):  
Protected Areas ◽  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Laser Scanners ◽  
Point Data

Since the 2000s, terrestrial laser scanning, as one of the methods used to document historical edifices in protected areas, has taken on greater importance because it mitigates the difficulties associated with working on large areas and saves time while also making it possible to better understand all the particularities of the area. Through this technology, comprehensive point data (point clouds) about the surface of an object can be generated in a highly accurate three-dimensional manner. Furthermore, with the proper software this three-dimensional point cloud data can be transformed into three-dimensional rendering/mapping/modeling and quantitative orthophotographs. In this chapter, the study will present the results of terrestrial laser scanning and surveying which was used to obtain three-dimensional point clouds through three-dimensional survey measurements and scans of silhouettes of streets in Fatih in Historic Peninsula in Istanbul, which were then transposed into survey images and drawings. The study will also cite examples of the facade mapping using terrestrial laser scanning data in Istanbul Historic Peninsula Project.

Study on Preprocessing Methods for Color 3D Point Cloud

2004 ◽  
Vol 471-472 ◽  
pp. 716-721
Author(s):  
X.D. Zhang ◽  
Chang Ku Sun ◽  
C. Wang ◽  
S.H. Ye
Keyword(s):  
Automatic System ◽  
Point Cloud ◽  
Laser Scanning ◽  
Reduction Method ◽  
Three Dimension ◽  
3D Point Cloud ◽  
Model Reconstruction ◽  
Selection Methods ◽  
Noise Data ◽  
Data Reduction Method

This paper provides a preprocessing flow for color three-dimension (3D) point cloud according to the characteristics of laser scanning data. The preprocessing methods and their functions are introduced in detail. Automatic system decision and manual polygon selection methods are applied to eliminate unwanted and noise data successfully, which possibly make improper color models reconstructed. A data reduction method is presented based on Grid reduction method considering color-boundary preservation. It can effectively avoid shape and color distortion in model reconstruction. Several experimental results are presented to indicate the feasibility and reliability of these methods, which can be broadly applied in various fields of products design, antiques and art wares digitization, etc.

Assessment of automatic segmentation accuracy with various point cloud density

2020 ◽  
Vol 961 (7) ◽  
pp. 47-55
Author(s):  
A.G. Yunusov ◽  
A.J. Jdeed ◽  
N.S. Begliarov ◽  
M.A. Elshewy
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Reference Data ◽  
Automatic Segmentation ◽  
Geometric Accuracy ◽  
Segmentation Method ◽  
Segmentation Methods ◽  
Segmentation Accuracy ◽  
Number Of Segments ◽  
Cloud Density

Laser scanning is considered as one of the most useful and fast technologies for modelling. On the other hand, the size of scan results can vary from hundreds to several million points. As a result, the large volume of the obtained clouds leads to complication at processing the results and increases the time costs. One way to reduce the volume of a point cloud is segmentation, which reduces the amount of data from several million points to a limited number of segments. In this article, we evaluated effect on the performance, the accuracy of various segmentation methods and the geometric accuracy of the obtained models at density changes taking into account the processing time. The results of our experiment were compared with reference data in a form of comparative analysis. As a conclusion, some recommendations for choosing the best segmentation method were proposed.

scholarly journals Linear-Based Incremental Co-Registration of MLS and Photogrammetric Point Clouds

2021 ◽  
Vol 13 (11) ◽  
pp. 2195
Author(s):  
Shiming Li ◽  
Xuming Ge ◽  
Shengfu Li ◽  
Bo Xu ◽  
Zhendong Wang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Registration Method ◽  
Cloud Data ◽  
Linear Feature ◽  
Data Registration ◽  
Source Point ◽  
Urban Remote Sensing ◽  
Single Data

Today, mobile laser scanning and oblique photogrammetry are two standard urban remote sensing acquisition methods, and the cross-source point-cloud data obtained using these methods have significant differences and complementarity. Accurate co-registration can make up for the limitations of a single data source, but many existing registration methods face critical challenges. Therefore, in this paper, we propose a systematic incremental registration method that can successfully register MLS and photogrammetric point clouds in the presence of a large number of missing data, large variations in point density, and scale differences. The robustness of this method is due to its elimination of noise in the extracted linear features and its 2D incremental registration strategy. There are three main contributions of our work: (1) the development of an end-to-end automatic cross-source point-cloud registration method; (2) a way to effectively extract the linear feature and restore the scale; and (3) an incremental registration strategy that simplifies the complex registration process. The experimental results show that this method can successfully achieve cross-source data registration, while other methods have difficulty obtaining satisfactory registration results efficiently. Moreover, this method can be extended to more point-cloud sources.

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

scholarly journals Comparing High Accuracy t-LiDAR and UAV-SfM Derived Point Clouds for Geomorphological Change Detection

2021 ◽  
Vol 10 (6) ◽  
pp. 367
Author(s):  
Simoni Alexiou ◽  
Georgios Deligiannakis ◽  
Aggelos Pallikarakis ◽  
Ioannis Papanikolaou ◽  
Emmanouil Psomiadis ◽  
...  
Keyword(s):  
Soil Erosion ◽  
Change Detection ◽  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Mean Value ◽  
Detection Methods ◽  
Mountainous Catchments ◽  
Aerial Vehicle ◽  
Soil Erosion Assessment

Analysis of two small semi-mountainous catchments in central Evia island, Greece, highlights the advantages of Unmanned Aerial Vehicle (UAV) and Terrestrial Laser Scanning (TLS) based change detection methods. We use point clouds derived by both methods in two sites (S1 & S2), to analyse the effects of a recent wildfire on soil erosion. Results indicate that topsoil’s movements in the order of a few centimetres, occurring within a few months, can be estimated. Erosion at S2 is precisely delineated by both methods, yielding a mean value of 1.5 cm within four months. At S1, UAV-derived point clouds’ comparison quantifies annual soil erosion more accurately, showing a maximum annual erosion rate of 48 cm. UAV-derived point clouds appear to be more accurate for channel erosion display and measurement, while the slope wash is more precisely estimated using TLS. Analysis of Point Cloud time series is a reliable and fast process for soil erosion assessment, especially in rapidly changing environments with difficult access for direct measurement methods. This study will contribute to proper georesource management by defining the best-suited methodology for soil erosion assessment after a wildfire in Mediterranean environments.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

Modelling of a construction pit

2021 ◽  
pp. 144-149
Author(s):  
G. G. Bickbulatova ◽  
E. N. Kupreeva
Keyword(s):  
Remote Sensing ◽  
Point Cloud ◽  
Laser Scanning ◽  
Remote Sensing Data ◽  
Digital Model ◽  
Geodetic Measurement ◽  
Sensing Data

There are various programs for processing geodetic measurement and remote sensing data. This article discusses the use of Cyclone software for building a digital model of a construction pit surface based on a point cloud based on laser scanning and calculating the volume of earthworks.

Sign in / Sign up

Export Citation Format

Share Document