Study on Influences of Reserving Coal Battlement along Goaf Tunnels on Rockburst

2013 ◽  
Vol 295-298 ◽  
pp. 2898-2901
Author(s):  
Chang Ji Dong ◽  
Guang Yi Sun ◽  
Tao Qin ◽  
Yong Li Liu
Keyword(s):  
Numerical Analysis ◽  
Effective Means ◽  
Recovery Process ◽  
Mine Safety ◽  
Practical Significance ◽  
Shock Bump ◽  
Deep Mining ◽  
Mining Technique ◽  
Safety Production ◽  
Continuous Mining

With the continuous mining of coal, many mine have entered the deep mining mine ranks. Many problems which caused by the deep mining, especially the mine rockburst has had a significant increase, and a more and more serious trend, this has seriously affected the safety production[1]. There are many rockburst factors, and by the mining process and mining, its leading factor was difficult to be determined during mining. However, analyzing the mining process, and researching the influences of mining process on rockburst, making effective means of monitoring, adjusting the recovery process parameters, there are practical significance on mine safety. Reserving stacks along the gob tunnel is a mining technique which many mining often used. The document conducted numerical analysis towards the vertical stress distribution in the stacks, and come to a conclusion about the mining technique influence to shock bump, which has provided the basis for the recovery process parameter adjustment. Practice has proved that the method is feasible. The results of the analysis have practical significance.

Geological Features of Kailuan Coal Mine and the Laws of Pressure Bump for Deep Mining

2011 ◽  
Vol 201-203 ◽  
pp. 408-412
Author(s):  
Lian Feng Gao ◽  
Ying Zhang ◽  
Yao Han Niu ◽  
Ying Chun Wang ◽  
Juan Sun ◽  
...  
Keyword(s):  
Coal Mine ◽  
High Stress ◽  
Mine Safety ◽  
Deep Mining ◽  
Geological Conditions ◽  
Key Factor ◽  
Pressure Bump ◽  
Safety Production ◽  
Permian Coal ◽  
The Impact

Pressure bump in coal mine production safety is a serious disaster. Geological conditions in Kailuan Mine are complex. Coal strata based on the Carboniferous - Permian coal. The roof and floor are made of sandstone and mudstone with poor rigidity. Fault development and mine have large amount of water inflow. Most of mine are already getting into the mining stage over one thousand meters deep. Increasing stress and high stress induced pressure bump as a key factor. In this paper, according to geological characteristics of Kailuan Coal, it analyzes the impact and the laws of pressure bump in the representation of deep mining phase, which have certain reference for coal mine safety production.

Development and Application of the Coal Mine Safety Production System Based on GIS

2012 ◽  
Vol 14 (4) ◽  
pp. 454-459
Author(s):  
Xiaobo XU ◽  
Hualing WU ◽  
Jianqiang WANG ◽  
Shengping WANG
Keyword(s):  
Coal Mine ◽  
Production System ◽  
Mine Safety ◽  
Coal Mine Safety ◽  
Safety Production

Hardware Design of Coal Mine Safety Monitoring System Based on WSN

2012 ◽  
Vol 546-547 ◽  
pp. 1483-1488
Author(s):  
Shu Ren Han ◽  
Jun Wang ◽  
Ling Liang ◽  
Xian Peng Liu
Keyword(s):  
Monitoring System ◽  
Coal Mine ◽  
Hardware Design ◽  
Mine Safety ◽  
Sink Node ◽  
Function Structure ◽  
Gas Concentration ◽  
Coal Mine Safety ◽  
Safety Monitoring System ◽  
Safety Production

In the safety production of coal mine, monitoring exact and real-time mine parameter is very important and key problem. The monitoring system of mine environment with wireless is designed, which is based on the structure of wireless sensor network (WSN).The system includes sensor node, Sink node and monitoring center. In the paper, the function structure and hardware design of sensor are introduced for the monitoring of temperature, humidity and gas concentration, and the function structure and hardware design of sink node is designed. The system has low power, rapid real-timing, stable running. Etc. This can satisfy with the requirement of WSN and suit the monitoring of bad environments. It will have wide application prospect.

scholarly journals The development of future foreign language teachers’ digital competences in creating multimedia tutorials

2021 ◽  
Vol 23 (6) ◽  
pp. 216-245
Author(s):  
G. Zh. Smagulova ◽  
G. B. Sarzhanova ◽  
G. K. Tleuzhanova ◽  
N. Stanciu
Keyword(s):  
Foreign Language ◽  
Effective Means ◽  
Research Work ◽  
Language Teachers ◽  
Educational Resources ◽  
Practical Significance ◽  
Future Teachers ◽  
Foreign Language Teachers ◽  
Training Course ◽  
Visual Materials

Introduction. The article considers the problem of the development of future teachers’ digital competences in creating foreign language multimedia tutorials and presents the results of the corresponding research conducted by the authors. In the context of the digitalisation of education, the foreign language multimedia tutorials represent an effective means of organising and integrating authentic audio-visual materials into the learning process. Nevertheless, FL (foreign language) teachers today face the problem of the lack of the competences, including digital ones, necessary for the development of effective multimedia tutorials, which cannot be created without the awareness of the methodological foundations of their designing, mastering of the relevant software tools and obtaining the corresponding level of digital skills of their usage.Aim. The current research is aimed to identify the effectiveness of the training course for future teachers in the development of foreign language multimedia tutorials based on authentic audio-visual materials. The training course was conducted at Academician E. A. Buketov Karaganda University among 30 graduate students.Methodology and research methods. The research work was based on the determination of four levels of training in the field of development of multimedia foreign language tutorials: recognition-based, reproductive (adaptive), heuristic, creative.Results and scientific novelty. The developed training course proved its effectiveness in increasing the level of development of digital competences of future FL teachers in the field of designing multimedia educational resources. The research results demonstrated that 80 % of the participants achieved the heuristic level in the field of the development of digital educational resources, namely multimedia tutorials, getting the required 60 % and more points (according to Bespalko V. P.) in the final assessment of academic achievement.Practical significance. The corresponding authoring experimental training course contributes to solving the problem of the development of the future FL teachers’ competences when creating multimedia educational resources, and to the problem of skills formation when using appropriate software to create multimedia educational resources.

scholarly journals Application of Comprehensive Geophysical Prospecting Method in Water Accumulation Exploration of Multilayer Goaf in Integrated Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Lei Zhang ◽  
Lin Xu ◽  
Yong Xiao ◽  
NingBo Zhang
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Comprehensive Analysis ◽  
High Density ◽  
Electromagnetic Method ◽  
Mine Safety ◽  
Practical Significance ◽  
Time Base ◽  
Transient Electromagnetic Method ◽  
Transient Electromagnetic

A coal mine in Datong is an integrated mine. At present, there is goaf in the upper and lower part of the mining coal seam. There is a lot of ponding in the goaf, which has great potential safety hazards for production. In order to find out the scope and location of ponding in goaf, the comprehensive geophysical exploration method combining transient electromagnetic method and high-density resistivity method is used to carry out the research. Firstly, the time-base, turn-off time, receiving delay, current, superposition times, and other parameters of the instrument are tested on the surface of known goaf to obtain the best instrument parameters, and the parameters are used to verify the feasibility of the research scheme; then, the transient electromagnetic method is used for large-area exploration on the surface of the mine, the suspected goaf ponding area is found through comprehensive analysis, and the high-density resistivity exploration is arranged in the suspected goaf ponding area. According to the obtained results, the scope and location of the goaf ponding area are accurately located through comprehensive analysis. The results show that there are two goaf ponding areas in the exploration area, which are located above the 8# coal seam currently mined; the range and location of goaf ponding area can be accurately obtained by using the comprehensive geophysical method of high-density electrical method and transient electromagnetic method. This method can provide reference for mine water prevention and control in Datong area and has great practical significance to ensure coal mine safety production.

scholarly journals DN Testing as a Branch of Forensic Technology: Problems of Formation and Directions of Development

2020 ◽  
Vol 77 (2) ◽  
pp. 93-99
Author(s):  
Р. Л. Степанюк ◽  
С. І. Перлін
Keyword(s):  
Dna Analysis ◽  
Effective Means ◽  
Scientific Basis ◽  
Forensic Identification ◽  
Practical Significance ◽  
Forensic Dna ◽  
Forensic Dna Analysis ◽  
Genetic Characteristics ◽  
Legislative Regulation ◽  
Living Organisms

The authors of the article have studied the problems and perspectives of the formation of specific branch of forensic technology, which is devoted to DNA analysis in order to solve the tasks arising in criminal proceeding. Particular attention has been paid to the lack of a corresponding component in the domestic system of forensic technology, unlike the forensic science of foreign countries. The necessity of development of forensic DNA analysis as an independent branch of forensic technology has been argued. It is confirmed by the following main arguments: the methodology of this field of research is based on the theory of forensic identification; its objects are traces of human and other living organisms; DNA analysis technologies are developed using the achievements of different sciences and adapted to solve problems of crime detection and investigation; they are aimed to ensuring the activities of law enforcement agencies in counteracting crime; the scope of DNA analysis application in crime combating should not be limited to forensic activities; legislative regulation of collecting and using personal genetic data is essential; DNA analysis technologies in terms of practical significance and fundamental scientific basis exceed all other branches of forensic technology. The authors have offered to define forensic DNA analysis as the branch of forensic technology that studies individual genetic characteristics of living organisms contained in their DNA, in order to identify them and solve diagnostic tasks in the detection and investigation of criminal offenses. Its structure has been determined. The authors have provided perspective development directions of forensic DNA analysis: ensuring the appropriate state of legislative regulation of relations in the field of selection and use of personal genetic information; implementation of effective means and methods of detection and removal of biological traces and samples; improvement of methods of forensic DNA testing; formation of recommendations concerning the peculiarities of using DNA analysis results for proving; development of the latest technologies of forensic DNA analysis.

Prediction and Analysis of Safety Production Accident in Mining Based on the GM(1,1)

2014 ◽  
Vol 989-994 ◽  
pp. 3443-3446
Author(s):  
Chen Fang Jiang ◽  
Ke Peng Hou ◽  
Hua Fen Sun
Keyword(s):  
Production Management ◽  
Management Practices ◽  
Safety Management ◽  
High Accuracy ◽  
Mine Safety ◽  
Grey Theory ◽  
Procedure Code ◽  
Safety Production ◽  
Mine Accidents

According to the grey theory, in order to predict and prevent accident effectively, the paper built a grey model and forecast the mine accidents in china in 2013 based on the statistics of mine accidents happened in China during period from 2007 to 2012. MATLAB was used to write procedure code of GM (1, 1) and empirical verification follows. The prediction results show that if high accuracy goes with the precision of the calculable model, which could be used to provide the basis for decision making to the safety production management practices in China. This case study indicates that GM (1, 1) plays an important role in mine safety management.

Fault Tree Analysis on Hydraulic System Causing Fire of Heavy Self-Dumping Truck

2012 ◽  
Vol 619 ◽  
pp. 425-430
Author(s):  
Chang Su ◽  
Wei Jia Su
Keyword(s):  
Hydraulic System ◽  
Fault Tree ◽  
Fault Tree Analysis ◽  
Spare Parts ◽  
Mine Safety ◽  
Prevention Measures ◽  
Oil Leakage ◽  
Spare Parts Management ◽  
Safety Production ◽  
Fire Accident

The fire accident of heavy mineral self-dumping truck is one of the most serious disaster in mine safety production. Research on the reasons that cause fire accident is an important study for ensuring safety production. By analyzing three elements that constitute self-dumping truck fire accident, the characteristics and easy ignition points as well as major combustion parts of self-dumping truck fire accident, we confirm that the hydraulic system leakage is the major factor that causes fire. To find out the fault reason of hydraulic system oil leakage, we analyze the composition and working principle of self-dumping truck, establish leakage fault tree of hydraulic system. Based on logic relationships between each fault and fire, we get the following conclusion: hydraulic tubing damage is the highest probability event that causes oil leakage fault. In addition, we should pay attention to spare parts management factor, correct driving factor and equipment management factor. We also propose the prevention measures of leakage and fire

Risk assessment of coal mine safety production management activities based on FMEA-BN

2021 ◽  
pp. 1-14
Author(s):  
Xiaochuan Wang ◽  
Huixian Wang
Keyword(s):  
Risk Assessment ◽  
Coal Mine ◽  
Production Management ◽  
Assessment Model ◽  
Mine Safety ◽  
Risk Level ◽  
Layer By Layer ◽  
Effect Analysis ◽  
Coal Mine Safety ◽  
Safety Production

At present, the situation of coal mine safety production is still grim. The key to solve the problem is to analyze the risk of management activities in the process of coal mine safety production. This paper takes the management activities in the process of coal mine safety production as the research object. Firstly, according to the coal mine safety production standardization management system, the safety production management activities are carried out layer by layer. Then, the Failure Mode and Effect Analysis (FMEA) is used to identify the human errors that lead to the failure of management activities at all levels of coal mine. Furthermore, the Fuzzy Set Theory is used to determine the evaluation results of experts on the risk level of coal mine safety production management activities. Combined with Bayesian network (BN), the risk assessment model of coal mine safety production management activities is established. Through the model, the risk probability of coal mine enterprise management activities is accurately calculated. According to the evaluation results, the risk of management activities in coal mine safety production is analyzed.

Sign in / Sign up

Export Citation Format

Share Document