Study on Seismic Performance of Unsymmetrical K-Type Friction Energy Dissipation Brace

2013 ◽  
Vol 353-356 ◽  
pp. 1879-1882
Author(s):  
Yi Xiang Xu ◽  
Wen Pan ◽  
Sheng Lan Zhu
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Time History ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Finite Element Software ◽  
Friction Energy ◽  
To Come ◽  
Rare Earthquake

The multi-storey reinforced concrete frame structure whose frame has been added with a kind of unsymmetrical K-type friction energy dissipation brace is taken as an example in this article. The time history analysis of different angles of unsymmetrical K-type friction energy dissipation brace and symmetrical K-type friction energy dissipation brace under the rare earthquake has been done by using the finite element software SAP2000. The analysis and comparison on the seismic performance shows that symmetrical K-type friction energy dissipation brace under certain conditions. Plan layout could be more flexible by using the result obtained which could become a reference for design in days to come.

Comparison of Stiffness Degradation of Special-Shaped Column and Rectangular Column Structure in Earthquake

2013 ◽  
Vol 838-841 ◽  
pp. 1492-1496
Author(s):  
Yi Ying Li ◽  
Wen Pan ◽  
Xiao Feng Zou
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Base Isolation ◽  
Time History ◽  
Frame Structure ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Software ◽  
Column Structure ◽  
Rare Earthquake

In this paper, using the finite element software PERFORM3D to establish the finite element analysis model for isolation and seismic frame structure with special-shaped column and rectangular column frame structure, and the overall structure of the moderate and strong elastic and nonlinear earthquake time-history analysis to get the dynamic characteristics, from two aspects of the damping coefficient in horizontal direction and the energy dissipation, investigation structure in earthquake and rare earthquake of superstructure stiffness attenuation. It can be drawn only seismic resistance measures are taken, the special-shaped column structure under rare earthquake stiffness attenuation speed is greater than the rectangular column, if after using base isolation technology, although the special-shaped column stiffness attenuation rate is still greater than the rectangular column, but the two energy dissipation ability.

Based on ANSYS Buckling-Restrained Brace Frame Structure Shock Absorption Analysis

2013 ◽  
Vol 477-478 ◽  
pp. 651-654
Author(s):  
Li Jun He ◽  
Yong Yao ◽  
Yun Peng Chu
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Structural Damage ◽  
Structural Response ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Story Drift ◽  
Design Earthquake ◽  
Rare Earthquake

Whether the design of new structure or reinforcement of the existing projects, structure earthquakereduction design is always the focus of research at home and abroad. The buckling restrained braces won the unanimous endorsement of the engineering sector with good energy dissipation capacity and simpleeasy construction process. This Paper based on the ANSYS analysis the structural response through simulated the bucklingrestrained brace frame structure and the general reinforced concrete frame on effect of the rare earthquake or design earthquake, and analysis the bucklingrestrained braces on the seismic performance of reinforced concrete frame structure. The analysis results show that the seismic performance of reinforced concrete frame with bucklingrestrained braces well, it can effectively reduce the maximum story drift and control structural damage. Therefore, Bucklingrestrained Brace should be used extensively to reinforced concrete framework .

The Passive Energy-Dissipation Study of Braced Steel Frame Structure

2010 ◽  
Vol 163-167 ◽  
pp. 318-322
Author(s):  
Wen Xia Luo ◽  
Jin Song Lei ◽  
Ying Hu
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Time History ◽  
Steel Frame ◽  
Frame Structure ◽  
Seismic Load ◽  
Control Force ◽  
Finite Element Software ◽  
Passive Energy Dissipation ◽  
Steel Frame Structure

The seismic performance of braced steel frame was simulated by the finite element software ANSYS based on the passive energy-dissipation under the low-cycle repeated load and the time-history analysis under seismic load for the energy-dissipation braced steel frame structure, no-brace steel frame structure, and conventional braced frame structure. The energy dissipation and seismic performance of three kinds of frame were compared, the results show that the energy-dissipation braced structure can produce strong energy-dissipation control force to enhance energy dissipation capacity of the whole structure significantly, and weaken the seismic load of the main frame. It follows that the energy-dissipation braced steel frame can achieve the purpose of energy dissipation for structure, and has good seismic performance.

scholarly journals Experimental Study of a New Precast Prestressed Concrete Joint

2018 ◽  
Vol 8 (10) ◽  
pp. 1871 ◽  
Author(s):  
Xueyuan Yan ◽  
Suguo Wang ◽  
Canling Huang ◽  
Ai Qi ◽  
Chao Hong
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Prestressed Concrete ◽  
Precast Concrete ◽  
Concrete Strength ◽  
Frame Structure ◽  
Loading Test ◽  
Concrete Frame ◽  
Concrete Joints ◽  
Precast Prestressed Concrete

Precast monolithic structures are increasingly applied in construction. Such a structure has a performance somewhere between that of a pure precast structure and that of a cast-in-place structure. A precast concrete frame structure is one of the most common prefabricated structural systems. The post-pouring joint is important for controlling the seismic performance of the entire precast monolithic frame structure. This paper investigated the joints of a precast prestressed concrete frame structure. A reversed cyclic loading test was carried out on two precast prestressed concrete beam–column joints that were fabricated with two different concrete strengths in the keyway area. This testing was also performed on a cast-in-place reinforced concrete joint for comparison. The phenomena such as joint crack development, yielding, and ultimate damage were observed, and the seismic performance of the proposed precast prestressed concrete joint was determined. The results showed that the precast prestressed concrete joint and the cast-in-place joint had a similar failure mode. The stiffness, bearing capacity, ductility, and energy dissipation were comparable. The hysteresis curves were full and showed that the joints had good energy dissipation. The presence of prestressing tendons limited the development of cracks in the precast beams. The concrete strength of the keyway area had little effect on the seismic performance of the precast prestressed concrete joints. The precast prestressed concrete joints had a seismic performance that was comparable to the equivalent monolithic system.

Seismic Performance Evaluation for Steel Reinforced Concrete Frame Structures

2011 ◽  
Vol 255-260 ◽  
pp. 2421-2425
Author(s):  
Qiu Wei Wang ◽  
Qing Xuan Shi ◽  
Liu Jiu Tang
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Seismic Performance Evaluation ◽  
Steel Reinforced Concrete ◽  
Concrete Frame ◽  
Structural Capacity ◽  
Reinforced Concrete Frame Structures ◽  
Dynamic Nonlinear Analysis

The randomness and uncertainty of seismic demand and structural capacity are considered in demand-capacity factor method (DCFM) which could give confidence level of different performance objectives. Evaluation steps of investigating seismic performance of steel reinforced concrete structures with DCFM are put forward, and factors in calculation formula are modified based on stress characteristics of SRC structures. A regular steel reinforced concrete frame structure is analyzed and the reliability level satisfying four seismic fortification targets are calculated. The evaluation results of static and dynamic nonlinear analysis are compared which indicates that the SRC frame has better seismic performance and incremental dynamic analysis could reflect more dynamic characteristics of structures than pushover method.

Seismic performance of ductile medium height reinforced concrete frame buildings designed in accordance with the provisions of the 1995 National Building Code of Canada

1999 ◽  
Vol 26 (5) ◽  
pp. 606-617 ◽  
Author(s):  
A C Heidebrecht ◽  
N Naumoski
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Frame Structure ◽  
Performance Criteria ◽  
Building Code ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Moment Resisting Frame ◽  
Moment Resisting ◽  
Interstorey Drift

This paper describes an investigation into the seismic performance of a six-storey ductile moment-resisting frame structure located in Vancouver and designed and detailed in accordance with the seismic provisions of the National Building Code of Canada (1995). Both pushover and dynamic analyses are conducted using an inelastic model of the structure as designed and detailed. The structural performance of a number of design variations is evaluated using interstorey drift and member curvature ductility response as performance measures. All frames studied are expected to perform at an operational level when subjected to design level seismic excitations and to meet life safe performance criteria at excitations of twice the design level.Key words: seismic, building, frames, ductile, design, performance, reinforced concrete, code.

Seismic Response Analysis on Flat L-Shaped Frame Structure Based on FEM

2012 ◽  
Vol 166-169 ◽  
pp. 2138-2142
Author(s):  
Hui Min Wang ◽  
Liang Cao ◽  
Ji Yao ◽  
Zhi Liang Wang
Keyword(s):  
Seismic Response ◽  
Three Dimensional ◽  
Time History ◽  
Frame Structure ◽  
Response Analysis ◽  
Reinforced Concrete Frame ◽  
Seismic Response Analysis ◽  
Concrete Frame ◽  
History Analysis ◽  
Complex Features

For the complex features in the form of a flat L-shaped reinforced concrete frame structure, the three dimensional FEM model of the structure was established in this paper, and the dynamic characteristics of the structure was analyzed, the participation equivalent mass of every mode’s order was obtained. Seismic response analysis for the structure was carried out with modal decomposition spectrum method and time history analysis method, the weak layer of the structure was pointed out and the reference for the structural design was provided.

The Structure of the Performance that Resist the Static Wind on the Reinforced of Steel Structure

2012 ◽  
Vol 193-194 ◽  
pp. 1109-1112
Author(s):  
Li Ming Wu ◽  
Xiao Liang Luo ◽  
Zi Jian Wang
Keyword(s):  
Reinforced Concrete ◽  
Steel Structure ◽  
Internal Force ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Wind Resistance ◽  
Concrete Frame ◽  
Building Model ◽  
Finite Element Software ◽  
Reinforced Concrete Frame Structure

Taking a 5-story reinforced concrete frame structure on the transformed 3-layer steel frames for an example, use finite element software ANSYS to reformation as a whole building model under static wind load changes for comparative analysis of internal force and displacement of the corresponding node. Analysis results show that in the transformation of steel on reinforced concrete frame structure, should fully take into account the structural stiffness change on construction of the overall effect of wind resistance, so that the transformation of the steel concrete frame structure more reasonable.

Test Research on Seismic Performance of Beam

2012 ◽  
Vol 594-597 ◽  
pp. 1680-1683
Author(s):  
Hai Tao Wan ◽  
Yu Qing Yuan
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Effective Means ◽  
Test Method ◽  
Frame Structure ◽  
Beam Specimen ◽  
Rc Beam ◽  
Rc Beams ◽  
Reinforced Concrete Frame ◽  
Concrete Frame

Reinforced concrete ( RC) frame structure is one type of building structure which is widely used in China. Damage of some reinforced concrete frame structures under the earthquake is caused by the damage of RC beams, So RC beams are an essential seismic members. The paper introduces the design of RC beam specimen, mechanical properties of materials, production of RC beam specimen, test method, loading device, loading system, the contents of measurement and data acquisition in detail. From the above analysis, it is obvious that the test is the most effective means of studying the seismic performance of beam.

Sign in / Sign up

Export Citation Format

Share Document