The Detection and Analysis of Different Exterior Decorative Materials CS Panel Solar Radiation Performance Energy Saving Influence

2013 ◽  
Vol 368-370 ◽  
pp. 1007-1012
Author(s):  
Feng Hua Zhao ◽  
Hai Rong Dong ◽  
Y.Y. Zhou
Keyword(s):  
Energy Efficiency ◽  
Solar Radiation ◽  
Energy Saving ◽  
Thermal Environment ◽  
Building Energy ◽  
Radiation Absorption ◽  
Building Energy Efficiency ◽  
Absorption Properties ◽  
Indoor Thermal Environment ◽  
Main Factors

The research of CS panel integration performance of energy saving, load bearing and decoration, shows that exterior materials reflection and absorption of solar radiation is one of the main factors that affects the thermal insulation and building energy efficiency. In this work the experimental detection data is analyzed both quantitatively and qualitatively in order to realize the influence of different solar radiation absorption properties from the outer decorative materials to the CS panel indoor thermal environment and energy-saving. The principle of energy saving optimization choice of the CS panel exterior decorative materials is proposed.

New Type Rural Residence Energy-Saving Effect Analysis in Northeast China

2013 ◽  
Vol 724-725 ◽  
pp. 1650-1653
Author(s):  
Qing Sun ◽  
Li Na Gao ◽  
Zai Lin Piao ◽  
Shi Yan Gu
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Thermal Environment ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Effect Analysis ◽  
Indoor Thermal Environment ◽  
New Type ◽  
Saving Effect ◽  
A Current

Building energy efficiency is a current research focus. This paper combined actual testing and software simulation to studies the new type rural residential in Chaoyang, study its effect on the indoor thermal environment and energy saving effect. The results showed that the new type rural residential indoor air temperature significantly lower than ordinary one in both vertical and horizontal directions, indoor thermal environment has markedly improved, and heat load indicators reduced significantly, energy-saving rate up to 66.41%, achieved the dual effect of improving indoor thermal environment and energy efficiency.

Green and Building Energy Efficiency

2013 ◽  
Vol 838-841 ◽  
pp. 2860-2864 ◽  
Author(s):  
Zi Jiang Yang
Keyword(s):  
Energy Efficiency ◽  
Thermal Environment ◽  
Building Energy ◽  
Ecological Environment ◽  
Building Energy Efficiency ◽  
Indoor Thermal Environment ◽  
Save Energy ◽  
The City

According to the greening construction to improve the effect of micro climate,we analyzes several greening measures to the influnence of building thermal environment, and have the conclusion:Greening can greatly improve the building indoor thermal environment, save energy, have the effect to beautify the city and improve the urban ecological environment.

Energy Saving Calculation and Analysis of the Rural House in Hohhot

2012 ◽  
Vol 575 ◽  
pp. 122-125
Author(s):  
Juan Wang
Keyword(s):  
Energy Efficiency ◽  
Energy Conservation ◽  
Energy Saving ◽  
Inner Mongolia ◽  
Building Energy ◽  
Rural Residence ◽  
Building Energy Efficiency ◽  
Residential Energy ◽  
Energy Efficiency Standards

Inner Mongolia mostly belongs to the rural residence building, no any relevant construction standard and building energy efficiency standards. Most of the farmers in build houses without considering building energy problems. This article through to a rural residential energy conservation calculation and analysis, and obtain the energy-saving index.

Research on Method of Building Energy Conservation Based on Infrared Imaging Measurement

2012 ◽  
Vol 512-515 ◽  
pp. 2899-2903
Author(s):  
Xiao Mei Shen ◽  
Ju Wu Xu
Keyword(s):  
Energy Efficiency ◽  
Energy Conservation ◽  
Energy Saving ◽  
Thermal Imaging ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Infrared Thermal Imaging ◽  
Infrared Technology ◽  
Building Energy Saving ◽  
Testing Work

With the deepening of the energy conservation of the building, energy saving from the original design of building energy-saving gradually turned to the field detection and completion acceptance, which requires a corresponding energy-efficient means of detection. With the development of infrared technology, the combination of infrared technology and detection methods of building energy-saving, to further promote the development of building energy efficiency testing work. Compared to the traditional heat flow meter or hot-box method, infrared thermal imaging method has no effect on the measured object, detecting the surface temperature of quick reaction speed, accompanying with wide temperature range and high precision, is widely used in various fields of testing work, which has been particularly prominent in the thermal defect detection. In this paper, the method of infrared thermography is used to confirm whether the thermal defects exist in energy-saving construction or not. Testing results show that infrared thermography can accurately reflect the temperature distribution of building wall surface. Infrared thermal imaging to detect the building surface's energy efficiency, which is providing efficient and accurate means of detection for the evaluation of the building energy efficiency. This is to help carry out a comprehensive building energy-saving testing.

Study on Construction Materials with Energy Saving Analysis of Architectural Design in Liangshan

2013 ◽  
Vol 830 ◽  
pp. 416-421
Author(s):  
Mei Xiong
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Architectural Design ◽  
Construction Materials ◽  
Building Energy ◽  
Wall Structure ◽  
Building Energy Efficiency ◽  
Roof Structure ◽  
Building Energy Saving ◽  
The Government

The constraints of resources and environment in China are more and more intense. The 12th Five-Year Plan requires that energy saving must be considered in the architectural design. Liangshan has special climate and sunshine. Therefore, the Government of Liangshan requires that building energy saving must be started from the stage of architectural design. Building energy efficiency must be considered from several aspects, such as architectural layout, wall structure, windows and doors, roof structure, external sun-shading, and construction materials.

Research on Residential Energy Efficiency Technologies under the Intermittent Energy Mode in Hot Summer and Cold Winter Zone

2014 ◽  
Vol 1065-1069 ◽  
pp. 2195-2198
Author(s):  
Jie Li ◽  
Fang Wang ◽  
Wan Ying Qu ◽  
Wan Zhen Li
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Cold Winter ◽  
Residential Energy ◽  
Energy Mode ◽  
Residential Energy Efficiency ◽  
Good Energy ◽  
Technical Measures

This paper analyzes that the climate characteristics in hot summer and cold winter zone make residents form a habit of using the energy intermittently, which reflects a good energy saving property and should be maintained. We find that the model of energy using has an impact on building costs; and these models determine the different technologies of building energy efficiency. It’s beneficial to adjust and update the conventional energy efficiency technical measures under the intermittent energy mode, exploring a preferable system of the residential energy efficiency technologies.

Design Innovation Approaches for Sustainable Smart Energy Systems

2018 ◽  
Author(s):  
Lan Lan ◽  
Wayes Tushar ◽  
Karen Hui En Sng ◽  
Chau Yuen ◽  
Kristin L. Wood ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Energy Systems ◽  
Energy System ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Energy Audit ◽  
Audit Process ◽  
Smart Energy Systems ◽  
Design Innovation

This paper studies an interdisciplinary approach for improving smart energy systems, and, in particular, building energy efficiency. Currently, energy audit is the most widely used approach to improve building energy efficiency. Energy audit increases the building energy efficiency by identifying, analyzing and implementing energy saving opportunities in existing buildings. The procedure of existing energy audit approach is relatively standardized, and energy audit professionals usually refer to Energy Conservation Measures (ECMs) checklists to determine opportunities for energy savings. In this context, this paper aims to improve the general energy audit process by integrating, adapting, and extending Design Innovation (DI) techniques which help to identify more energy saving opportunities beyond the existing energy audit checklists and deliver user-centered and disruptive innovative energy-saving solutions which are missing in the traditional energy audit procedure. The motivation, advantages, and the implementation procedure of selected DI approaches are explained separately. To demonstrate the effectiveness of the proposed mechanism, an example of developing a smart energy system for a building testbed is given.

scholarly journals Operational risks and building energy efficiency

2020 ◽  
Vol 164 ◽  
pp. 02012
Author(s):  
Victoria Borkovskaya ◽  
Evgeniy Degaev ◽  
Vladimir Rimshin ◽  
Igor Shubin
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Software Package ◽  
Housing Stock ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Structural Units ◽  
Federal Program ◽  
Operational Risks ◽  
Energy Survey

The article discusses the main aspects of the Federal program of energy saving and energy efficiency of the housing and communal complex. The algorithm of energy survey of the building is given. The calculation of the temperature field of structural units using the ELCUT software package is considered. The operational risks of implementing the energy saving Program and improving the energy efficiency of the housing stock are determined.

Study on Energy-Saving Renovation of Existing Heating Masonry-Concrete Residential Buildings

2011 ◽  
Vol 280 ◽  
pp. 147-151 ◽  
Author(s):  
Hong Guo ◽  
Min Fang Su ◽  
Xiao Jun Jin
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Saving ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Envelope ◽  
Indoor Thermal Environment ◽  
Consumption Situation ◽  
Current Energy

Based on the current energy consumption situation of existing masonry-concrete residential buildings in China, it discussed the main energy-saving renovation policies and technologies. Taking existing masonry-concrete residential building of Taiyuan city as a case, it analyzed its heat loss situations, energy-saving renovation design and reconstruction technologies of building envelope. It discussed energy-saving renovation effects. Energy efficiency and indoor thermal environment improved significantly after energy-saving renovation. The building life is extended.

Application Research on Virtual Simulation Technology in Building Energy Efficiency

2013 ◽  
Vol 361-363 ◽  
pp. 357-361
Author(s):  
Zhang Xiao Na ◽  
Jie Du
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Engineering Application ◽  
Building Energy ◽  
Virtual Simulation ◽  
Building Energy Efficiency ◽  
Simulation Technology ◽  
Application Analysis ◽  
Practical Engineering ◽  
Building Energy Saving

With energy and environmental issues are increasingly becoming the focus of global attention, building energy efficiency is one of the basic strategic planning for sustainable development in China, it is developing rapidly, and gets impressive results. Nevertheless, the building energy saving in our country that what has a lot of questions. For this reason, virtual simulation technology is made full use in building energy-saving and made practical engineering application analysis, a new method will be sock in building energy-saving design.

Sign in / Sign up

Export Citation Format

Share Document