An Application of the Frequency-Domain Experience Mode Decomposition to Enhance Deconvolution Results

2013 ◽  
Vol 397-400 ◽  
pp. 2120-2123
Author(s):  
Ya Nan Zhang ◽  
Yong Shou Dai ◽  
Jin Jie Ding ◽  
Man Man Zhang ◽  
Rong Rong Wang
Keyword(s):  
Reflection Coefficient ◽  
Frequency Domain ◽  
Empirical Mode Decomposition ◽  
Amplitude Spectrum ◽  
Seismic Section ◽  
Mode Decomposition ◽  
The Time Domain ◽  
Non Stationary Signal ◽  
Different Characteristics ◽  
Emd Method

To improve the resolution of the seismic section after deconvolution, a method based on frequency-domain experience mode decomposition was proposed. Empirical mode decomposition (EMD) method is usually used to analyze the time domain non-stationary signal, in order to better recover original reflection coefficient sequence, empirical mode decomposition was implemented for frequency-domain amplitude spectrum. Through the different characteristics between the equivalent filter amplitude after deconvolution and reflection coefficient sequence amplitude in frequency-domain, the real reflection coefficient sequence was recovered. Simulation results indicate that the method is effective and feasible.

scholarly journals INFORMATION QUANTIFICATION OF EMPIRICAL MODE DECOMPOSITION AND APPLICATIONS TO FIELD POTENTIALS

2011 ◽  
Vol 21 (01) ◽  
pp. 49-63 ◽  
Author(s):  
ZAREEN MEHBOOB ◽  
HUJUN YIN
Keyword(s):  
Empirical Mode Decomposition ◽  
Field Potential ◽  
Stationary Time Series ◽  
Intrinsic Mode Functions ◽  
Information Analysis ◽  
Neural Recordings ◽  
Mode Decomposition ◽  
Non Stationary Signal ◽  
Instantaneous Frequencies ◽  
Emd Method

The empirical mode decomposition (EMD) method can adaptively decompose a non-stationary time series into a number of amplitude or frequency modulated functions known as intrinsic mode functions. This paper combines the EMD method with information analysis and presents a framework of information-preserving EMD. The enhanced EMD method has been exploited in the analysis of neural recordings. It decomposes a signal and extracts only the most informative oscillations contained in the non-stationary signal. Information analysis has shown that the extracted components retain the information content of the signal. More importantly, a limited number of components reveal the main oscillations presented in the signal and their instantaneous frequencies, which are not often obvious from the original signal. This information-coupled EMD method has been tested on several field potential datasets for the analysis of stimulus coding in visual cortex, from single and multiple channels, and for finding information connectivity among channels. The results demonstrate the usefulness of the method in extracting relevant responses from the recorded signals. An investigation is also conducted on utilizing the Hilbert phase for cases where phase information can further improve information analysis and stimulus discrimination. The components of the proposed method have been integrated into a toolbox and the initial implementation is also described.

APPLICATION OF THE EMPIRICAL MODE DECOMPOSITION METHOD TO GROUND-ROLL NOISE ATTENUATION IN SEISMIC DATA

2013 ◽  
Vol 31 (4) ◽  
pp. 619 ◽  
Author(s):  
Luiz Eduardo Soares Ferreira ◽  
Milton José Porsani ◽  
Michelângelo G. Da Silva ◽  
Giovani Lopes Vasconcelos
Keyword(s):  
Empirical Mode Decomposition ◽  
Seismic Data ◽  
Low Frequency ◽  
High Amplitude ◽  
Seismic Line ◽  
Seismic Processing ◽  
Mode Decomposition ◽  
Ground Roll ◽  
Fortran 90 ◽  
Emd Method

ABSTRACT. Seismic processing aims to provide an adequate image of the subsurface geology. During seismic processing, the filtering of signals considered noise is of utmost importance. Among these signals is the surface rolling noise, better known as ground-roll. Ground-roll occurs mainly in land seismic data, masking reflections, and this roll has the following main features: high amplitude, low frequency and low speed. The attenuation of this noise is generally performed through so-called conventional methods using 1-D or 2-D frequency filters in the fk domain. This study uses the empirical mode decomposition (EMD) method for ground-roll attenuation. The EMD method was implemented in the programming language FORTRAN 90 and applied in the time and frequency domains. The application of this method to the processing of land seismic line 204-RL-247 in Tacutu Basin resulted in stacked seismic sections that were of similar or sometimes better quality compared with those obtained using the fk and high-pass filtering methods.Keywords: seismic processing, empirical mode decomposition, seismic data filtering, ground-roll. RESUMO. O processamento sísmico tem como principal objetivo fornecer uma imagem adequada da geologia da subsuperfície. Nas etapas do processamento sísmico a filtragem de sinais considerados como ruídos é de fundamental importância. Dentre esses ruídos encontramos o ruído de rolamento superficial, mais conhecido como ground-roll . O ground-roll ocorre principalmente em dados sísmicos terrestres, mascarando as reflexões e possui como principais características: alta amplitude, baixa frequência e baixa velocidade. A atenuação desse ruído é geralmente realizada através de métodos de filtragem ditos convencionais, que utilizam filtros de frequência 1D ou filtro 2D no domínio fk. Este trabalho utiliza o método de Decomposição em Modos Empíricos (DME) para a atenuação do ground-roll. O método DME foi implementado em linguagem de programação FORTRAN 90, e foi aplicado no domínio do tempo e da frequência. Sua aplicação no processamento da linha sísmica terrestre 204-RL-247 da Bacia do Tacutu gerou como resultados, seções sísmicas empilhadas de qualidade semelhante e por vezes melhor, quando comparadas as obtidas com os métodos de filtragem fk e passa-alta.Palavras-chave: processamento sísmico, decomposição em modos empíricos, filtragem dados sísmicos, atenuação do ground-roll.

scholarly journals A research on fiber-optic vibration pattern recognition based on time-frequency characteristics

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881346 ◽  
Author(s):  
Tabi Fouda Bernard Marie ◽  
Dezhi Han ◽  
Bowen An ◽  
Jingyun Li
Keyword(s):  
Pattern Recognition ◽  
Frequency Domain ◽  
Time Domain ◽  
Fiber Optic ◽  
Pattern Recognition Method ◽  
Recognition Method ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Vibration Pattern ◽  
The Time Domain

To detect and recognize any type of events over the perimeter security system, this article proposes a fiber-optic vibration pattern recognition method based on the combination of time-domain features and time-frequency domain features. The performance parameters (event recognition, event location, and event classification) are very important and describe the validity of this article. The pattern recognition method is precisely based on the empirical mode decomposition of time-frequency entropy and center-of-gravity frequency. It implements the function of identifying and classifying the event (intrusions or non-intrusion) over the perimeter to secure. To achieve this method, the first-level prejudgment is performed according to the time-domain features of the vibration signal, and the second-level prediction is carried out through time-frequency analysis. The time-frequency distribution of the signal is obtained by empirical mode decomposition and Hilbert transform and then the time-frequency entropy and center-of-gravity frequency are used to form the time-frequency domain features, that is, combined with the time-domain features to form feature vectors. Multiple types of probabilistic neural networks are identified to determine whether there are intrusions and the intrusion types. The experimental results demonstrate that the proposed method is effective and reliable in identifying and classifying the type of event.

scholarly journals Output-Only Modal Analysis Based on Improved Empirical Mode Decomposition Method

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Shiqiang Qin ◽  
Qiuping Wang ◽  
Juntao Kang
Keyword(s):  
Modal Analysis ◽  
Empirical Mode Decomposition ◽  
Modal Parameters ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Random Decrement Technique ◽  
Mode Decomposition ◽  
Frequency Components ◽  
Output Only ◽  
Emd Method

The output-only modal analysis for bridge structures based on improved empirical mode decomposition (EMD) is investigated in this study. First, a bandwidth restricted EMD is proposed for decomposing nonstationary output measurements with close frequency components. The advantage of bandwidth restricted EMD to standard EMD is illustrated by a numerical simulation. Next, the modal parameters are extracted from intrinsic mode function obtained from the improved EMD by both random decrement technique and stochastic subspace identification. Finally, output-only modal analysis of a railway bridge is presented. The study demonstrates the mode mixing issues of standard EMD can be restrained by introducing bandwidth restricted signal. Further, with the improved EMD method, band-pass filter is no longer needed for separating the closely spaced frequency components. The modal parameters extracted based on the improved EMD method show good agreement with those extracted by conventional modal identification algorithms.

Combining Pole Placement and Online Empirical Mode Decomposition Methods to Adaptive Active Control of Structural Vibration

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
S. H. Momeni Massouleh ◽  
S. A. Hosseini Kordkheili ◽  
H. Mohammad Navazi ◽  
H. Bahai
Keyword(s):  
Empirical Mode Decomposition ◽  
Active Control ◽  
Pole Placement ◽  
Structural Vibration ◽  
Control Technique ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Optimal Gains ◽  
Excitation Frequencies ◽  
Emd Method

Using a combination of the pole placement and online empirical mode decomposition (EMD) methods, a new algorithm is proposed for adaptive active control of structural vibration. The EMD method is a time-frequency domain analysis method that can be used for nonstationary and nonlinear problems. Combining the EMD method and Hilbert transform, which is called Hilbert–Huang transform, achieves a method that can be implemented to extract instantaneous properties of signals such as structural response dominant instantaneous frequencies. In the proposed algorithm, these estimated instantaneous properties are utilized to improve the pole-placement method as an adaptive active control technique. The required active control gains are obtained using a genetic algorithm scheme, and optimal gains are calculated corresponding to preselected excitation frequencies. An algorithm is also introduced to choose excitation frequencies based on online EMD method resolution. In order to investigate the efficiency of the proposed method, some case studies that include a discrete model, continuous samples of beam and plate structures, and experimental cantilevered beam are carried out, and the results of the proposed method are compared with the preset (nonadaptive) optimal gains conditions.

scholarly journals Application of variational mode decomposition to seismic random noise reduction

2017 ◽  
Vol 14 (4) ◽  
pp. 888-898 ◽  
Author(s):  
Wei Liu ◽  
Siyuan Cao ◽  
Zhiming Wang
Keyword(s):  
Noise Reduction ◽  
Empirical Mode Decomposition ◽  
Random Noise ◽  
Computational Cost ◽  
Superior Performance ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Reconstruction Performance ◽  
Non Stationary Signal

Abstract We have proposed a new denoising method for the simultaneous noise reduction and preservation of seismic signals based on variational mode decomposition (VMD). VMD is a recently developed adaptive signal decomposition method and an advance in non-stationary signal analysis. It solves the mode-mixing and non-optimal reconstruction performance problems of empirical mode decomposition that have existed for a long time. By using VMD, a multi-component signal can be non-recursively decomposed into a series of quasi-orthogonal intrinsic mode functions (IMFs), each of which has a relatively local frequency range. Meanwhile, the signal will focus on a smaller number of obtained IMFs after decomposition, and thus the denoised result is able to be obtained by reconstructing these signal-dominant IMFs. Synthetic examples are given to demonstrate the effectiveness of the proposed approach and comparison is made with the complete ensemble empirical mode decomposition, which demonstrates that the VMD algorithm has lower computational cost and better random noise elimination performance. The application of on field seismic data further illustrates the superior performance of our method in both random noise attenuation and the recovery of seismic events.

scholarly journals P300 characterization using empirical mode decomposition

2019 ◽  
Vol 8 (3) ◽  
pp. 40
Author(s):  
Victor S. Braz ◽  
Ana Claudia Souza ◽  
Gustavo F. Rodrigues
Keyword(s):  
Neural Network ◽  
Empirical Mode Decomposition ◽  
Communication Systems ◽  
Feedforward Neural Network ◽  
Essential Step ◽  
Mode Decomposition ◽  
Electrophysiological Signals ◽  
Low Volume ◽  
Emd Method

As the communication between brain and computer becomes more accessible the extraction of important features of electrophysiological signals is an essential step in artificial communication systems. This paper proposes the usage of the Empirical Mode Decomposition to identify characteristics of the P300 signal and classify target and non-target signals using a feedforward neural network. The results show that through the usage of EMD method it is possible to identify the P300 signal using low volume of data.

scholarly journals An Improvement in Representation of Audio Signal in Time-Frequency Plane using EMD-2TEMD Based Approach

2016 ◽  
Vol 44 ◽  
pp. 141-150
Author(s):  
Kazi Mahmudul Hassan ◽  
Md. Ekramul Hamid ◽  
Takayoshi Nakai
Keyword(s):  
Empirical Mode Decomposition ◽  
Source Separation ◽  
Audio Signal ◽  
Hilbert Spectrum ◽  
Hilbert Huang Transform ◽  
Time Frequency ◽  
Separation Result ◽  
Mode Decomposition ◽  
Recent Approach ◽  
Non Stationary Signal

This study proposed an enhanced time-frequency representation of audio signal using EMD-2TEMD based approach. To analyze non-stationary signal like audio, timefrequency representation is an important aspect. In case of representing or analyzing such kind of signal in time-frequency-energy distribution, hilbert spectrum is a recent approach and popular way which has several advantages over other methods like STFT, WT etc. Hilbert-Huang Transform (HHT) is a prominent method consists of Empirical Mode Decomposition (EMD) and Hilbert Spectral Analysis (HSA). An enhanced method called Turning Tangent empirical mode decomposition (2T-EMD) has recently developed to overcome some limitations of classical EMD like cubic spline problems, sifting stopping condition etc. 2T-EMD based hilbert spectrum of audio signal encountered some issues due to the generation of too many IMFs in the process where EMD produces less. To mitigate those problems, a mutual implementation of 2T-EMD & classical EMD is proposed in this paper which enhances the representation of hilbert spectrum along with significant improvements in source separation result using Independent Subspace Analysis (ISA) based clustering in case of audio signals. This refinement of hilbert spectrum not only contributes to the future work of source separation problem but also many other applications in audio signal processing.

scholarly journals A VARIANT OF THE EMD METHOD FOR MULTI-SCALE DATA

2009 ◽  
Vol 01 (04) ◽  
pp. 483-516 ◽  
Author(s):  
THOMAS Y. HOU ◽  
MIKE P. YAN ◽  
ZHAOHUA WU
Keyword(s):  
Empirical Mode Decomposition ◽  
Decomposition Method ◽  
Separation Property ◽  
Intrinsic Mode Functions ◽  
Scale Separation ◽  
Multi Scale ◽  
Mode Decomposition ◽  
Empirical Mode Decomposition Method ◽  
Emd Method ◽  
Scale Data

In this paper, we propose a variant of the Empirical Mode Decomposition method to decompose multiscale data into their intrinsic mode functions. Under the assumption that the multiscale data satisfy certain scale separation property, we show that the proposed method can extract the intrinsic mode functions accurately and uniquely.

Sign in / Sign up

Export Citation Format

Share Document