Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) Blends

2014 ◽  
Vol 496-500 ◽  
pp. 317-321
Author(s):  
Shou Hai Wang ◽  
Jun Gao ◽  
Gu Ren Fei ◽  
Ping Zhang ◽  
Jun Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Maleic Anhydride ◽  
Methyl Methacrylate ◽  
Acrylonitrile Butadiene Styrene ◽  
Screw Extruder ◽  
Polyolefin Elastomer ◽  
Twin Screw ◽  
Orthogonal Tests ◽  
Butadiene Styrene

Acrylonitrile-butadiene-styrene (ABS) / polymethyl methacrylate (PMMA) with the addition of maleic anhydride grafted polystyrene (KT-5) and polyolefin elastomer (POE) were melt processed in a co-rotating twin-screw extruder. The effect of KT-5 and POE content on the mechanical properties of ABS/PMMA was investigated. Experiment results indicate that KT-5 can improve the tensile strength and the composites are toughened effectively as the addition of POE. According to Orthogonal tests, it demonstrates that POE ha a greater effect on the blends than KT-5, and there exist no obvious interactivity between the two components.

Study on the Mechanical Properties and Surface Gloss of Acrylonitrile Butadiene-Styrene/Poly(Methyl Methacrylate)/Ethylene Methacrylate Copolymer (EMA) Composites

2014 ◽  
Vol 496-500 ◽  
pp. 327-330
Author(s):  
Shou Hai Wang ◽  
Jun Gao ◽  
Shu Xia Lin ◽  
Ping Zhang ◽  
Jun Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Methyl Methacrylate ◽  
Acrylonitrile Butadiene Styrene ◽  
Screw Extruder ◽  
Twin Screw ◽  
Methacrylate Copolymer ◽  
Surface Gloss ◽  
Pmma Blends ◽  
Butadiene Styrene

Ethylene methacrylate (EMA) copolymer toughened acrylonitrile-butadiene-styrene (ABS)/polymethyl methacrylate (PMMA) were prepared in a co-rotating twin-screw extruder. The effect of EMA on mechanical properties and surface gloss of ABS/PMMA blends was investigated. Experiment results show that the toughness of ABS/PMMA is improved effectively with the incorporation of EMA, while the tensile strength and glossiness decrease slightly. ABS/PMMA/EMA blends present optimum mechanical and luster properties when the content of EMA is 6wt%.

Enhancement of Mechanical Properties of ABS/PC-HNT Nano Composites

2018 ◽  
Vol 24 (8) ◽  
pp. 6000-6003
Author(s):  
Y. Narendra Babu ◽  
M. Venkateswara Rao ◽  
A. Gopala Krishna
Keyword(s):  
Mechanical Properties ◽  
Matrix Material ◽  
Acrylonitrile Butadiene Styrene ◽  
Halloysite Nanotubes ◽  
Mechanical Tests ◽  
Screw Extruder ◽  
Nano Composite ◽  
Melt Compounding ◽  
Twin Screw ◽  
Butadiene Styrene

The objective of this paper is to experimentally study tensile strength, Impact strength, Flexural strength and Wear Characteristics of the Nano tubular material Halloysite Nanotubes (HNT) into ABS/PC blend with ABS and PC compositions in the ratio 40/60. We have fabricated the Thermoplastic Nanocomposites specimens as per ASTM standards, with the Acrylonitrile Butadiene Styrene (ABS) and Polycarbonate (PC) blend as matrix material and with 1%, 2%, 3%, 4%, 5% and 6% HNT reinforcement material using Co–Rotating Intermeshing Twin Screw Extruder by Melt Compounding. Mechanical Tests were conducted and results were compared with the original ABS/PC blend. Effects of Halloysite Nanotubes reinforcement percentage were discussed in detail. The obtained results suggested that ABS/PC (40/60) blend with 4% reinforcement of Halloysite Nanotubes executed better mechanical properties. SEM is used to study the failure mechanism of the proposed Nano composite.

Effect of Flame Retardants on Performance of PALF/ABS Composites

2013 ◽  
Vol 747 ◽  
pp. 351-354 ◽  
Author(s):  
Poonsub Threepopnatkul ◽  
Thanaphat Krachang ◽  
Wipawee Teerawattananon ◽  
Katawut Suriyaphaparkor ◽  
Chanin Kulsetthanchalee
Keyword(s):  
Mechanical Properties ◽  
Flame Retardants ◽  
Acrylonitrile Butadiene Styrene ◽  
Superior Performance ◽  
Molding Machine ◽  
Screw Extruder ◽  
Pineapple Leaf Fiber ◽  
Twin Screw ◽  
Diphenyl Phosphate ◽  
Butadiene Styrene

This research is to study the effect of two different flame retardants i.e., bisphenol-A bis (diphenyl phosphate) (BDP) and 9, 10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) on the flammability and mechanical properties of the composites of modified natural pineapple leaf fiber (PALF) reinforced acrylonitrile butadiene styrene (ABS). A 10% by weight of such PALF was compounded with ABS using diisononyl phthalate 1% w/w as plasticizer at the different flame retardant concentration (10 and 20 wt%) in a co-rotating twin screw extruder. An injection molding machine was used to prepare the specimens. The effects of flame-retardants showed that the PALF/ABS composite containg DOPO showed superior performance in terms of flammabitily. Higher content of flame retardants led to increase LOI value. Moreover, the composites added DOPO produce enhanced mechanical properties such as youngs modulus and tensile strength.

Morphology and Mechanical Properties of Polyoxymethylene and Acrylonitrile-Butadiene-Styrene Blends with Compatibilizer

2015 ◽  
Vol 659 ◽  
pp. 463-467
Author(s):  
Sirirat Wacharawichanant ◽  
Parida Amorncharoen ◽  
Ratiwan Wannasirichoke
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Maleic Anhydride ◽  
Impact Strength ◽  
Interfacial Adhesion ◽  
Acrylonitrile Butadiene Styrene ◽  
Two Phase ◽  
The Impact ◽  
Morphology And Mechanical Properties ◽  
Butadiene Styrene

The effects of polypropylene-graft-maleic anhydride (PP-g-MA) compatibilizers on the morphology and mechanical properties of polyoxymethylene (POM)/acrylonitrile-butadiene-styrene (ABS) blends were investigated. Two types of compatibilizers, PP-g-MA with maleic anhydride 0.50 wt% (PP-g-MA1) and PP-g-MA with maleic anhydride 1.31 wt% (PP-g-MA2) were used to study the interfacial adhesion of POM and ABS. POM/ABS blends with and without PP-g-MA compatibilizer were prepared by an internal mixer and molded by compression molding. Scanning electron microscope (SEM) was used to investigate the morphology of ABS phase in POM matrix. The results found that POM/ABS blends clearly demonstrated a two phase separation of dispersed ABS phase and the POM matrix phase, and ABS phase dispersed as spherical domains in POM matrix in a range of ABS 10-30 wt% and the blends containing ABS more than 30 wt% showed the elongated structure of ABS phase. The addition of PP-g-MA could improve the interfacial adhesion of POM/ABS blends due to the domain size of ABS phase decreased after adding PP-g-MA. The mechanical properties showed that the impact strength of POM/ABS blends decreased in a range of 10-20 wt% and did not change after 20 wt%. The addition of PP-g-MA did not change the impact strength of POM/ABS blends. The Young’s modulus of POM/ABS blends increased up to 30 wt% of ABS and then decreased. While the blends showed the decrease of tensile strength and percent strain at break with increasing ABS content. The addition of PP-g-MA increased the tensile strength of POM/ABS blends in a range of 30-40 wt% of ABS. The above results indicated that the morphology had an effect on the mechanical properties of polymer blends.

Mechanical Properties of Poly(Butylene Succinate) Reinforced with Alpha Cellulose

2015 ◽  
Vol 1119 ◽  
pp. 283-287
Author(s):  
Sarit Liprapan ◽  
Thumnoon Nhujak ◽  
Pranut Potiyaraj
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flexural Strength ◽  
Young’S Modulus ◽  
Glycidyl Methacrylate ◽  
Interfacial Interaction ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Butylene Succinate ◽  
Twin Screw

The objective of this study is to prepare α-cellulose reinforced poly (butylene succinate) composites (PBS/α-cellulose). The effect of amount α-cellulose on the mechanical properties of the composites was investigated. To improve interfacial interaction between PBS and α-cellulose, glycidyl methacrylate grafted poly (butylene succinate) (PBS-g-GMA) was used as a compatibilizer. Mechanical properties of PBS composites prepared by using a twin-screw extruder were investigated. The mechanical properties of PBS/α-cellulose decreased due to the agglomeration of α-cellulose. Nevertheless, tensile strength, Young’s modulus and flexural strength of PBS composites were improved after the incorporation of PBS-g-GMA. The optimum loading of PBS-g-GMA and α-cellulose in the PBS was found to be 5 and 6 phr.

Mechanical Properties of PP/clay Nanocomposites Prepared from Masterbatch: Effect of Nanoclay Loadings and Re-Processing

2019 ◽  
Vol 805 ◽  
pp. 59-64
Author(s):  
Achmad Chafidz ◽  
Cholila Tamzysi ◽  
Lilis Kistriyani ◽  
Ratna Dewi Kusumaningtyas ◽  
Dhoni Hartanto
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Tensile Test ◽  
Modulus Of Elasticity ◽  
Tensile Tests ◽  
Clay Nanocomposites ◽  
Test Machine ◽  
Molding Machine ◽  
Screw Extruder ◽  
Twin Screw

PP/clay nanocomposites samples of 1st and 2nd cycles (recycle) and different nanoclay loadings (i.e. 0, 5, 10, 15 wt%) samples were made by utilizing twin-screw extruder and injection molding machine. The samples were then characterized using a tensile test machine. The tensile tests results showed that modulus of elasticity and tensile strength of the nanocomposites samples for both 1st and 2nd cycles were all higher than the neat PP, and increased with increasing nanoclay loadings. The enhancements of modulus of elasticity (as compared to the neat PP) for 1st cycle of the nanocomposites were about 38.08%, 49.33%, and 78.65% for NC-5-I, NC-10-I, and NC-15-I, respectively. Whereas, for the 2nd cycle of the nanocomposites were about 44.33%, 59.59%, and 84.69% for NC-5-II, NC-10-II, and NC-15-I, respectively. This indicated that the incorporation of nanoclay in the PP matrix significantly increased mechanical properties, especially modulus of elasticity and tensile strength of the nanocomposites. Additionally, values of modulus of elasticity and tensile strength of 1st cycle and 2nd cycle of PP/clay nanocomposites were compared by plotting them in two graphs. The plots revealed that reprocessing of the nanocomposites did not significantly influence the mechanical properties of the nancomposites.

Investigation on Mechanical Properties of Blend Virgin and Recycled Acrylonitrile-Butadiene-Styrene (ABS) in Injection Molding

2020 ◽  
Vol 833 ◽  
pp. 8-12
Author(s):  
Salina Budin ◽  
Koay Mei Hyie ◽  
Hamid Yussof ◽  
Aulia Ishak ◽  
Rosnani Ginting
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Rupture Strength ◽  
Acrylonitrile Butadiene Styrene ◽  
Green Technology ◽  
Most Significant Change ◽  
Increasing Demand ◽  
The Impact ◽  
Butadiene Styrene

Acrylonitrile-butadiene-styrene (ABS) is one of the most widely used plastic. The application of ABS increases rapidly in industries recently. The drawback of the increasing demand of ABS is the increment of ABS waste. Huge increment in ABS waste has led to the increasing of environmental pollution. The demand in green technology and sustainability of resources has urged the need of recycling of ABS waste. However, the mechanical properties of the recycled ABS are deteriorated. Hence, this work aims to study the mechanical properties of blend virgin and recycled ABS. The first sample started with 100wt% of virgin ABS. While the second to eleventh samples was a mixing of virgin and recycled ABS at 10wt% incremental recycled ABS. The last sample was prepared using 100wt% of recycled ABS. The results show that the tensile strength of 100wt% of recycled ABS is slightly decreased as compared to 100wt% virgin ABS. Similar trend was observed on traverse rupture strength (TRS) when the TRS for 100wt% of recycled ABS is lower by 8% when compared to 100wt% of virgin ABS. The most significant change is observed on the impact strength. The impact strength for 100wt% of recycled ABS is substantially dropped by 86% as compared to 100wt% of virgin ABS.

Epoxy/methyl methacrylate acrylonitrile butadiene styrene (MABS) copolymer blends: reaction-induced viscoelastic phase separation, morphology development and mechanical properties

2019 ◽  
Vol 43 (23) ◽  
pp. 9216-9225 ◽  
Author(s):  
Jomon Joy ◽  
Krzysztof Winkler ◽  
Kuruvilla Joseph ◽  
S. Anas ◽  
Sabu Thomas
Keyword(s):  
Mechanical Properties ◽  
Phase Separation ◽  
Methyl Methacrylate ◽  
Acrylonitrile Butadiene Styrene ◽  
Copolymer Blends ◽  
Morphology Development ◽  
Butadiene Styrene

Epoxy/MABS blends undergo viscoelastic phase separation during curing due to the dynamic asymmetry of the phases and a significant improvement in the mechanical properties of the system is observed.

Mechanical properties and morphology of polypropylene/poly(acrylonitrile–butadiene–styrene) nanocomposites

2016 ◽  
Vol 49 (3) ◽  
pp. 209-225 ◽  
Author(s):  
Mohamad Al Hafiz Ibrahim ◽  
Azman Hassan ◽  
Mat Uzir Wahit ◽  
Mahbub Hasan ◽  
Munirah Mokhtar
Keyword(s):  
Mechanical Properties ◽  
Maleic Anhydride ◽  
Acrylonitrile Butadiene Styrene ◽  
Impact Testing ◽  
Silicate Layer ◽  
Scanning Electron Micrographs ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Poly Acrylonitrile ◽  
Butadiene Styrene

Polypropylene (PP)/poly(acrylonitrile–butadiene–styrene) (ABS) blends containing montmorillonite (MMT) compatibilized with polypropylene-grafted maleic anhydride were prepared by melt extrusion using twin screw extruder followed by injection molding. Mechanical properties were evaluated through tensile, flexural, and impact testing. The microstructure and formation of nanocomposites were assessed by scanning and transmission electron microscopy and X-ray diffraction (XRD). Incorporation of polypropylene-grafted maleic anhydride and MMT into PP/ABS blend led to higher strength and stiffness but at the expense of toughness. Scanning electron micrographs revealed a fine and homogeneous dispersion of ABS phase in PP matrix. Both XRD and transmission electron microscopic analysis revealed the formation of intercalated clay silicate layer in PP/ABS nanocomposites.

scholarly journals Effects of In-Process Temperatures and Blending Polymers on Acrylonitrile Butadiene Styrene Blends

Inventions ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 93
Author(s):  
Muhammad Harris ◽  
Johan Potgieter ◽  
Hammad Mohsin ◽  
Karnika De Silva ◽  
Marie-Joo Le Guen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Large Scale ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
High Thermal Resistance ◽  
3D Printed ◽  
First Time ◽  
Butadiene Styrene

Acrylonitrile butadiene styrene (ABS) is a renowned commodity polymer for additive manufacturing, particularly fused deposition modelling (FDM). The recent large-scale applications of 3D-printed ABS require stable mechanical properties than ever needed. However, thermochemical scission of butadiene bonds is one of the contemporary challenges affecting the overall ABS stability. In this regard, literature reports melt-blending of ABS with different polymers with high thermal resistance. However, the comparison for the effects of different polymers on tensile strength of 3D-printed ABS blends was not yet reported. Furthermore, the cumulative studies comprising both blended polymers and in-process thermal variables for FDM were not yet presented as well. This research, for the first time, presents the statistical comparison of tensile properties for the added polymers and in-process thermal variables (printing temperature and build surface temperature). The research presents Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) to explain the thermochemical reasons behind achieved mechanical properties. Overall, ABS blend with PP shows high tensile strength (≈31 MPa) at different combinations of in-process parameters. Furthermore, some commonalities among both blends are noted, i.e., the tensile strength improves with increase of surface (bed) and printing temperature.

Sign in / Sign up

Export Citation Format

Share Document