Design of Granary Parameter Wireless Monitoring System Based on Internet

2014 ◽  
Vol 563 ◽  
pp. 167-171
Author(s):  
Yao Hua Guo
Keyword(s):  
Monitoring System ◽  
Software Design ◽  
Data Transmission ◽  
Humidity Sensor ◽  
Wireless Sensor ◽  
Low Power Consumption ◽  
Wireless Monitoring ◽  
Embedded Gateway ◽  
Hardware Circuit ◽  
The Web

A granary parameter wireless monitoring system based on Internet is introduced, in which the wireless sensor network is built by using the temperature and humidity sensor and the CC2430 wireless chip, the embedded gateway and the Web server are built by using the embedded ARM chip S3C2410, the system overall structure and hardware circuit and software design are detailed described. In the system, the remote wireless monitoring of grain parameters is realized, users can perform data transmission and monitoring by Internet. The whole system is stable, reliable, low power consumption and it can meet the measurement requirements.

The Design of Tire Pressure Monitoring System Based on WSN

2013 ◽  
Vol 373-375 ◽  
pp. 342-347 ◽  
Author(s):  
Xue Wen He ◽  
Long Cheng ◽  
Wen Qian Huang
Keyword(s):  
Wireless Sensor Network ◽  
Monitoring System ◽  
Software Design ◽  
Low Cost ◽  
Wireless Sensor ◽  
Low Power Consumption ◽  
Pressure Monitoring ◽  
Tire Pressure ◽  
The Core ◽  
Tire Pressure Monitoring System

Tire pressure monitoring system (TPMS) is used to monitor fast or slow tire pressure loss or too high tire temperature, and ensure the safety of the drivers and the passengers. A new kind of TPMS as the core of MSP430F149 microcontrollers is put forward, which based on Wireless Sensor Network. It adopts Infineon SP370 new sensor as the transmitter and TDA5220 as the receiver. The whole system scheme, hardware and software design are expounded in this paper. A low cost, low power consumption and high precision TPMS is studied, and the tire pressure and temperature can be immediately and real-time measured.

scholarly journals Design of a State Monitoring System for Equipment based on the Zigbee Wireless Sensor Network

2016 ◽  
Vol 12 (06) ◽  
pp. 20 ◽  
Author(s):  
Li Hua ◽  
Xu Da ◽  
Fuquan Zhao
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Monitoring System ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
State Monitoring ◽  
Sensor Module ◽  
Wireless Module ◽  
Hardware Circuit

For the sake of overcoming the shortcoming of some equipment such as complex wiring and much measurement parameter, a wireless state monitoring system is developed based on Zigbee, which was composed of upper monitor control PC, wireless gateway CC2530, sensor node CC2530 and sensor module. By studying the characteristic of the equipment, wireless sensor network of a center controller and six wireless sensor node was made up. Then the nod hardware circuit were designed, the wireless module software was programmed by C language, and furthermore, the user interface software was developed based on LabVIEW. The test is done to show that the system can meet state monitoring requirements for some equipment.

Design of Crane Torque Monitoring System Based on ARM

2013 ◽  
Vol 278-280 ◽  
pp. 866-872
Author(s):  
Ping Liao ◽  
Zhen Xing Huang
Keyword(s):  
Monitoring System ◽  
Software Design ◽  
Windows Ce ◽  
Monitoring Device ◽  
Safe Operation ◽  
Intelligent Monitoring ◽  
Design And Implementation ◽  
Time Performance ◽  
Hardware Circuit ◽  
Easy Operation

In view of the drawback of current crane torque monitoring system in real-time performance and anti-jamming performance, a new crane intelligent monitoring device based on ARM and Windows CE operating system is proposed, including its working theory, hardware circuit and software design. Taking the versatility and anti-jamming performance of the system into account, the design and implementation of input signal conditioning modules and output execution modules are elaborated in detail. The application shows that this system is stable and reliable, and can effectively guarantee safe operation of crane, its easy-operation and versatility make it a good application prospect.

Ammeter Interface Device and Monitoring System Based on Wireless Sensor Networks

2011 ◽  
Vol 219-220 ◽  
pp. 900-903
Author(s):  
Min Sheng Tan ◽  
Hai Tao Tian ◽  
Qiong Chen
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Real Time ◽  
Monitoring System ◽  
Wireless Sensor ◽  
Real Time Monitoring ◽  
Wireless Monitoring ◽  
Community Monitoring ◽  
Monitoring Center ◽  
Interface Device

A kind of wireless monitoring interface device based on wireless sensor networks for ammeters was proposed. Ammeters connected by UART or pulse interface to get ammeters’ real-time data. Then, an ammeter monitoring system based on wireless sensor networks (AMSBW) was designed. The system consist building-WSN and community wireless monitoring center. And user’s ammeters, ammeter wireless monitoring interface devices and building-sink nodes were included in the building-WSN; the center sink node and monitoring host were contained in community monitoring center. The functions of real-time monitoring, remote control and preventing electricity-stolen were designed in the AMSBW which had simple installation and configuration. Then a software system to test the AMSBW was exploited. At last, system’s tests results show that it could effectively achieve the goal of real-time monitoring and control ammeter.

Layer Based Energy-Balanced Reliable Routing Protocol for Wireless Sensor Networks in Coal Mine

2013 ◽  
Vol 846-847 ◽  
pp. 457-462
Author(s):  
Chang Sen Zhang ◽  
Yong Jie Si
Keyword(s):  
Monitoring System ◽  
Coal Mine ◽  
Data Transmission ◽  
Residual Energy ◽  
Wireless Sensor ◽  
Cluster Radius ◽  
Reliable Routing ◽  
Working Face ◽  
Special Environment ◽  
Optimal Cluster

Synthetically considering the special environment underground, we combined the wireless sensor network with the existing cable mine monitoring system, forming a new monitoring system based on Ethernet and WSN, and then we put forward a layer based energy-balanced reliable routing (LBEBR) protocol for WSN to solve the spot problem in zonal area of coal mine and to ensure the reliability of data transmission. The working face was divided into several equal rectangular layers. According to the optimal cluster radius calculated before, different numbers of nodes constituted clusters of different sizes in each layer. In the stage of data transmission, using the reliability evaluation of nodes and considering three factors, the residual energy of nodes, the distance between nodes and the reliability of nodes, to select the best next-hop node. Simulation results show that the protocol can not only balance the energy of the network, but also elude problem nodes effectively to increase the reliability of data transmission.

Communication Software Design of Remote Monitoring System for Motor Excitation Parameters Based on PSTN

2011 ◽  
Vol 480-481 ◽  
pp. 1018-1022
Author(s):  
Xiao Qing Zhang ◽  
Li Juan Chen
Keyword(s):  
Monitoring System ◽  
Software Design ◽  
Remote Monitoring ◽  
Data Transmission ◽  
Solution Method ◽  
The Public ◽  
Remote Monitoring System ◽  
Remote Maintenance ◽  
Function Design ◽  
Communication Software

Based on the remote maintenance of motor exciation, this paper discusses the function design and solution method of communication software which is used in remote monitoring system of motor exciation. It mainly introduces the process of data transmission founded on the Public Switched Telephone Network (PSTN) and key problems of the implementation of communication MSComm control in VC++.

scholarly journals Design and Implementation of an Industrial Wireless Sensor Network for Temperature Monitoring

2016 ◽  
Vol 12 (03) ◽  
pp. 82
Author(s):  
Liqun Hou ◽  
Lei Yang
Keyword(s):  
Monitoring System ◽  
Circuit Design ◽  
Low Cost ◽  
Temperature Monitoring ◽  
Least Square ◽  
Wireless Sensor ◽  
Prototype System ◽  
C Language ◽  
Temperature Signal ◽  
Hardware Circuit

Temperature signal is one of the key parameters in industrial processes. Accurate and effective temperature monitoring may provide necessary device information to the operator and prevent unexpected catastrophic equipment faults due to device overheat. Compared with wired monitoring system, wireless sensor networks (WSNs) monitoring system has many advantages, such as low cost and convenient installation. This paper proposes and implements a multichannel temperature monitoring system based on WSNs module, Jennic JN5139. The hardware circuit design of the sensor node and the software design for WSNs nodes and the centralized computer using C language and LabVIEW respectively are given in detailed. An optimization subsection algorithm based on least square for thermocouple nonlinear calibration is also explored to increase the measurement accuracy. The prototype system is evaluated with an electric furnace temperature monitoring system. The experimental results show the feasibility and effectiveness of the proposed system.

Application Design for Oilfield Monitoring System Based on ZigBee Wireless Network Technology

2011 ◽  
Vol 135-136 ◽  
pp. 294-299
Author(s):  
Kai Yuan Meng ◽  
Peng Yang ◽  
Qing Nian Cao
Keyword(s):  
Wireless Sensor Networks ◽  
Monitoring System ◽  
Communication Protocol ◽  
Wireless Transmission ◽  
Wireless Sensor ◽  
Network Technology ◽  
System Framework ◽  
Wireless Monitoring ◽  
Fast Network ◽  
Software And Hardware

By analyzing the oilfield wireless monitoring system, the paper puts forward an oilfield monitoring system framework based on ZigBee wireless sensor networks on basic of studying ZigBee standard communication protocol. Software and hardware of data acquisition and transmission are designed in this system. The fast network and wireless transmission are realized.

Design of Wireless Sensor Gateway Based on ARM

2014 ◽  
Vol 977 ◽  
pp. 370-373
Author(s):  
Shuang Ping Zhao ◽  
Jing Hong Xing ◽  
Hui He
Keyword(s):  
Software Design ◽  
Communication Protocol ◽  
Network Measurement ◽  
Wireless Sensor ◽  
Network Node ◽  
Embedded Network ◽  
Internet Server ◽  
Embedded Gateway ◽  
Measurement Control ◽  
Resolution Scheme

In view of function needs for embedded network measurement control system,this paper presents a resolution scheme of wireless sensor gateway based on ARM11,The paper in-depth research hardware design of wireless sensor network node and software design, which is to realize communication between embedded gateway and Internet server by any of WIFI,GPRS,3G,IP. According to the corresponding communication protocol, the scheme applied to a variety of different occasions

Research on the Construction Tower Cranes Group State Real-Time Monitoring System

2013 ◽  
Vol 694-697 ◽  
pp. 1391-1395
Author(s):  
Feng Long Kan ◽  
Chang Tao Wang ◽  
Lan Guang Zhao
Keyword(s):  
Real Time ◽  
Wireless Network ◽  
Monitoring System ◽  
Low Cost ◽  
Wireless Sensor ◽  
Low Power Consumption ◽  
Network Technology ◽  
Construction Machinery ◽  
Controlling System ◽  
Condition Monitoring System

Tower cranes are widely used in the course of construction machinery and equipment. In this system, tower cranes work more safely and stably, and the controlling system becomes more accurate, which is very vital to improve efficieney, aviod accidents and analyze fault.With the rapid growth and population of the wireless network technology, ZigBee wireless network technology by virtue of their low rate, low power consumption and low cost, has been widely applied in the fields of wireless sensor networks and automatic control. The real-time condition monitoring system of tower cranes based on wireless sensor network is studied in this paper.

Sign in / Sign up

Export Citation Format

Share Document