The Optimum Design of Slope Angle Based on Critical Sliding Field

2014 ◽  
Vol 580-583 ◽  
pp. 755-759
Author(s):  
Shi Guo Sun ◽  
Ya Nan Yi ◽  
Qin Huan Cui ◽  
Lu Jin
Keyword(s):  
Slope Stability ◽  
Optimum Design ◽  
Technical Problem ◽  
Slope Angle ◽  
Stable State ◽  
Economic Benefits ◽  
Local Slope ◽  
Stability Of Slope ◽  
The Stability ◽  
Global And Local

The optimum design of final highwall is a multivariable and complex technical problem that every change in any factor will influence the stable state. Based on the history-case, this paper applied the critical sliding field to search the critical slip and evaluate the stability of slope with different geometric forms. Comprehensively compared the global and local slope stability and its economic benefits, finally achieved the optimum design of final highwall.

scholarly journals Performance Evaluation of Geometric Modification on the Stability of Road Cut Slope Using FE Based Plaxis Software

2021 ◽  
Author(s):  
Fentahun Ayalneh Mekonnen
Keyword(s):  
Performance Evaluation ◽  
Slope Stability ◽  
Slope Failure ◽  
Human Life ◽  
Slope Angle ◽  
Cut Slope ◽  
Governing Parameter ◽  
Stability Of Slope ◽  
The Stability ◽  
Steep Slopes

Slope failures are among the common geo-environmental natural hazards in the hilly and mountainous terrain of the world. Specially it is the major difficulty for the development of construction as it causes considerable damage on the infrastructure, human life and property. Different causes of slope failure and stabilization methods are proposed by different scholars. In this study the performance of geometric modification in slope stability was investigated using numerical method. The study uses slope height, slope angle and slope profile i.e. single slope, multi slope and bench slope as a governing parameter in the performance evaluation of geometric modification on the slope stability. The evaluation was conducted on a newly constructed road cut slope using a finite element based plaxis software. The result from performance evaluation of slope profiles show that geometric modification provides better and economical slope stability. The stability of slope decreases with increase in slope height and slope angle leading to an uneconomical design of high slopes in a single slope profile. However, the use of benching improves the stability of cut slope (i.e. the use of 2 m and 3 m bench improves the factor of safety by 7.5% and 12% from single slope profile). The method is more effective in steep slopes. Similarly, the use of a multi slope profile improves the stability of slope in stratified soil with varied strength. The performance is more significant when it is used in combination with benches. The study also provides comparison of slope profiles based on different criteria’s and recommend the selection profile based on site-specific considerations.

scholarly journals Parametric Analysis of Slope Stability for River Embankment

2020 ◽  
Vol 4 (3) ◽  
pp. 196
Author(s):  
Dhrubo Haque ◽  
Md Isteak Reza
Keyword(s):  
Slope Stability ◽  
Soil Property ◽  
Failure Surface ◽  
Worst Case ◽  
Creative Commons ◽  
Stability Of Slope ◽  
The Stability ◽  
Underlying Soil ◽  
Open Access Article ◽  
Stiff Soil

This paper has aimed to investigate the slope stability for various conditions like embankment geometry, water level and soil property. The analysis has been performed by using the XSTABL program for different slope heights, slope angles and flood conditions with a fixed soil cohesion value. Since the rapid drawdown is the worst case for a particular embankment therefore, the analysis has been further performed with different cohesion values. From this investigation it has been noticed that the increase of cohesion of soil can increase the stability to a great extent. All the analysises have been performed for twenty bore logs. It has been found that the underlying soil affects the stability of slope as the failure surface intersects the soil of this region. It has been also observed that the loose, liquefiable sandy soil decreases the stability while the stiff soil with sufficient cohesion value stabilizes the slope of embankment.  This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited. 

scholarly journals Sensitivity Analysis of Influencing Factors of Building Slope Stability Based on Orthogonal Design and Finite Element Calculation

2018 ◽  
Vol 53 ◽  
pp. 03076
Author(s):  
RUAN Jin-kui ◽  
ZHU Wei-wei
Keyword(s):  
Finite Element ◽  
Slope Stability ◽  
Design Method ◽  
Orthogonal Design ◽  
Slope Angle ◽  
Friction Angle ◽  
Range Analysis ◽  
Factors Affecting ◽  
Orthogonal Test Design ◽  
The Stability

In order to study the sensitivity of factors affecting the homogeneous building slope stability, the orthogonal test design method and shear strength reduction finite element method were used. The stability safety factor of the slope was used as the analysis index, and the range analysis of results of 18 cases were carried out. The results show that the order of sensitivity of slope stability factors is: internal friction angle, slope height, cohesion, slope angle, bulk density, elastic modulus, Poisson's ratio. The analysis results have reference significance for the design and construction of building slope projects.

Rational Research of Deep Concave Open-Pit Slope Angle of Lower Part

2014 ◽  
Vol 716-717 ◽  
pp. 248-251
Author(s):  
Xiao Long Ma ◽  
Guang Zhang ◽  
Qing Guo Ren ◽  
Xiu Ling Jiang
Keyword(s):  
Slope Stability ◽  
Research Work ◽  
Slope Angle ◽  
Mineral Resources ◽  
Research Direction ◽  
Economic Benefits ◽  
Open Pit Mine ◽  
Open Pit ◽  
Future Research ◽  
Factors Affecting

With the rapid advance of industrialization,the consumption of mineral resources is increasing.For open pit mine,many of them went into deep mining.The current,widespread adoption of open pit slope angle makes deep concave mining has a huge stripping ratio.So many mines in trouble,on the premise of guarantee the deep sunken open pit slope stability increase slope toe can bring huge economic benefits,and a lot of research work has been done.This paper describes the factors affecting the stability of open-pit mine slope,the slope rock mass stress analysis,to calculate the lower steep slope economic benefits,puts forward reasonable suggestions the future research direction of the slope stability of open-pit mine.

scholarly journals Study on shaping slope stability of dump in eastern grassland open-pit mine

2020 ◽  
Vol 194 ◽  
pp. 04043
Author(s):  
Guo Xiaoli ◽  
Yan Jiancheng ◽  
Li Xueliang ◽  
Wen Xin ◽  
Li Xingli
Keyword(s):  
Slope Stability ◽  
Slope Angle ◽  
Mining Area ◽  
Open Pit Mine ◽  
Open Pit ◽  
Open Pit Mining ◽  
Dump Slope ◽  
The Stability ◽  
Step Type ◽  
Mine Dump

The dumps in the open-pit mining area in the eastern grassland are prone to landslides due to the fragile ecological environment, so it is inevitable to reshape the dump slopes. In order to explore a more scientific method for slope shaping of open-pit mine dump, slope stability analysis were used to compare effect of three types of slope-type (wave-shaped, slope-shaped and step-shaped slope shaping method)in outside dumping site of Baori Hiller open-pit mine. The results show that the slope stability is negatively correlated with the slope angle, and the stability of different shaping slopes is realized as wave-shaped slope (F=2.711)> Slope-shaped slope(F=2.513)>Step-shaped slope(F=1.047), in which the wave type and slope type are all within the safe range, but the step type slope is unstable; in consideration of cost, stability and erosion resistance, it is better to set the slope angle of the dump to 15°.The wave-shaped shaping method of the natural dumping of the excavation field outside the Baori Hiller open-pit mine has the best effect and is worth promoting.

Stability Analysis of High Filling Slope Affected by Precipitation Intensity

2012 ◽  
Vol 170-173 ◽  
pp. 1174-1178 ◽  
Author(s):  
Wen Tao Wang ◽  
Tao Song ◽  
Zeng Rong Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Slope Stability ◽  
Precipitation Intensity ◽  
Safety Coefficient ◽  
Stability Of Slope ◽  
Seepage Theory ◽  
The Stability ◽  
Unsaturated Seepage ◽  
Element Method

Aiming at researching on stability of slope affected by precipitation intensity, transient saturated-unsaturated seepage finite element method and slope stability finite element method are combined in this paper. Vadose field of slope is simulated in different precipitation intensity. Based on vadose field, the writers analyzed the stability of slope affected by precipitation intensity. The research results indicate that water is brought together in the interface first. Then the water level moves toward up and down respectively from the both sides of the interface. On the basis of saturated-unsaturated seepage theory, precipitation intensity has little effect on the slope stability in the first 6 hours after precipitation. After that, slope safety coefficient is relatively high when precipitation intensity is smaller, and vice versa.

scholarly journals Effects of Bonded Tyres on Leachate Recirculation of Bioreactor Landfills

2017 ◽  
Vol 11 (1) ◽  
pp. 552-562 ◽  
Author(s):  
Huijie Zhang ◽  
Jie Heng ◽  
Dongsheng Jeng ◽  
Haixia Xu
Keyword(s):  
Slope Stability ◽  
Momentum Balance ◽  
Bioreactor Landfill ◽  
Bioreactor Landfills ◽  
Leachate Recirculation ◽  
Local Factor ◽  
Outflow Rate ◽  
Speed Up ◽  
Stability Of Slope ◽  
The Stability

Introduction: In bioreactor landfills, leachate recirculation significantly influences the process of stabilization and the stability of slope. Method: To speed up the leachate recirculation and reduce its adverse impact on slope stability, this paper proposes a new method which constructs a spatial net consisted of bonded whole tyres in the municipal waste during landfilling. Results and Conclusion: In this study, a numerical two-permeability flow model was used to investigate the effects of tyres embedding on the outflow rate of leachate injection. Furthermore, it was coupled with momentum balance equations to determine the local factor of safety of slope stability. The established model was applied to a simplified bioreactor landfill. The simulation results demonstrated that the tyre net can accelerate the rate of leachate injection and contribute to distribute the liquid more uniformly. Meanwhile, the slope stability was improved due to the enforcement of waste in the presence of tyres.

scholarly journals ANALISIS BENTUK GEOMETRI TERHADAP STABILITAS LERENG PADA TAMBANG TERBUKA DARI ASPEK GEOTEKNIK

2020 ◽  
Vol 3 (2) ◽  
pp. 166-176
Author(s):  
Lisa Fianti ◽  
Munirwansyah Munirwansyah ◽  
Halida Yunita
Keyword(s):  
Slope Stability ◽  
Soil Depth ◽  
Slope Angle ◽  
Geometric Shape ◽  
Open Pit ◽  
Open Pit Mining ◽  
Primary Data ◽  
Soil Parameters ◽  
Soil Parameter ◽  
The Stability

Aceh Province is one of the coal producers, especially Sumber Batu Village in Meurebo District, West Aceh Regency. In the implementation of coal mining, it is necessary to pay attention to the slope stability of open-pit mining to identify and estimate the possibility of landslides. For this reason, the author conducted research in analyzing the geometric shape of the slope stability with the slope variance of modeling the reduction of the existing angle αeks - 10% to the depth of three layers of soil 11 meters. The 1st layer of soil is 1.5 meters, the second layer of soil is 2.5 meters, and the third layer of soil is 7 meters. Slope stability is strongly influenced by the geometric shape of the slope and the strength of soil parameters. To identify the stability of the slope against slope failure, computationally performed using the finite element method with Plaxis software as the reference for the value of FK 1.25, which is considered safe/stable, meaning that collapse rarely occurs. In this research, primary data is used in the form of direct observation in the field, namely taking soil samples to obtain soil data in the form of soil physical properties and soil mechanical properties into soil parameter data, which is tested in the soil laboratory. Secondary data used are map data, boring data, and Sondir data. Soil parameter data were processed using Plaxis software. The results of the slope stability analysis showed that by modeling the geometric shape of the slope (αeks - 10%) on the open slope of a coal mine with a soil depth of 11 meters, the FK value was 3.60. From the results of the FK scores, it shows that the slope of the slope is 3.60 1.25 above the reference value of safe/stable FK. The FK value is 0.2 greater than the FK existing geometry. The conclusion of this study is that geometric shapes play an important role in determining the stability of an open coal pit excavation slope. The smaller the slope angle, the greater the FK value obtained, or the more gentle the slope, the higher the safety value of a slope.

Analysis of the Influences of Matric Suction of Unsaturated Soil on the Slope Stability

2012 ◽  
Vol 170-173 ◽  
pp. 3186-3189 ◽  
Author(s):  
Li Wang ◽  
Cui Ran Liu
Keyword(s):  
Slope Stability ◽  
Unsaturated Soil ◽  
Yellow River ◽  
Matric Suction ◽  
Saturated Soil ◽  
Equilibrium Method ◽  
Stability Of Slope ◽  
Ultimate Equilibrium ◽  
The Stability ◽  
Test Result

There is suction in unsaturated soil. This is the most obvious difference between unsaturated soil and saturated soil. It is very difficult to measure it, so research has always been done without account of the influences of matric suction of unsaturated soil. In this paper, based on the test result of engineering characteristics of unsaturated soil from Yellow River Embankments, the stability of slope of Yellow River Embankments is analyzed using ultimate equilibrium method and the influencing rule of matric suction on slope is advanced.

Analysis of the Open-Pit to Underground Mining Slope Stability

2014 ◽  
Vol 484-485 ◽  
pp. 599-603
Author(s):  
Guang Ming Bao ◽  
Juan Chang ◽  
Zhi Gang Liu
Keyword(s):  
Numerical Simulation ◽  
Slope Stability ◽  
Underground Mining ◽  
Open Pit ◽  
Maximum Displacement ◽  
Modeling Software ◽  
Stability Of Slope ◽  
Computer Numerical Simulation ◽  
The Stability ◽  
Mining Slope

This paper uses the simulation technology of computer numerical simulation, combined with the GAMBIT numerical modeling software and ANSYS structure analysis software, we carry out an in-depth research and analysis on the stability of engineering simulation, at the same times establish the mathematical model of ANSYS numerical simulation displacement stability and design the ANSYS command stream program algorithm. Finally, this paper uses the open-pit to underground mining slope stability as an example, to verify the reliability of the model and algorithm. Through the numerical simulation, we get the displacement of slope in the Y direction and Z direction. In the Y direction, the maximum displacement is 0m, the negative maximum displacement is 5.88m and displacement is relatively large; in the Z direction, the maximum displacement is 1.32M, the negative maximum displacement is 1.08M and the stability of slope is different in different position. The numerical simulation provides the theory reference for the safety of mining engineering.

Sign in / Sign up

Export Citation Format

Share Document