Study on Seismic Design of Complex High-Rise Building

2014 ◽  
Vol 584-586 ◽  
pp. 1841-1844
Author(s):  
Fang Fang Yang
Keyword(s):  
Engineering Design ◽  
Seismic Performance ◽  
Seismic Design ◽  
Design Principle ◽  
Complex Shape ◽  
Design Method ◽  
High Rise ◽  
High Rise Building ◽  
Traditional Design

Super high-rise building seismic design of complex shape is very important, can not be carried out according to the traditional design method. This paper gives a design principle based on behavior, it in the engineering design and more attention. Method based on behavior on the properties of reaction structures under earthquake is evaluated. High-rise buildings must be based on the method of state to confirm that the building to meet seismic performance.

Analysis on Seismic Performance of Beam and Plate Converter Floor

2014 ◽  
Vol 580-583 ◽  
pp. 1551-1554
Author(s):  
Gen Tian Zhao ◽  
Xu Ting Kou
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Structure Calculation ◽  
High Rise ◽  
High Rise Building ◽  
Design Requirements

With the project case, the seismic performance of girder transfer floor member and the plate transfer floor member were discussed. Contrast calculation was carried out in girder transfer floor member and the plate transfer floor member with SATWE method to analyze its reasonable and unreasonable places. Based on overall structure calculation of a high rise building, the seismic design requirements for buildings applying thick transferring plate have been presented. The conclusion is that the seismic performance of girder transfer floor member is more advantageous and affordable, more convenient and more economical in ingredients.

Seismic Design of the High-Rise Building Structure and Sustainable Development

2013 ◽  
Vol 351-352 ◽  
pp. 536-540
Author(s):  
Jing Yuan Ma ◽  
Fu Ma ◽  
Chen Suo Hu ◽  
Zhi Xian Wen
Keyword(s):  
Sustainable Development ◽  
Seismic Design ◽  
Structural Design ◽  
Design Method ◽  
High Strength ◽  
Lateral Force ◽  
High Rise ◽  
High Rise Building ◽  
Strength Material ◽  
Seismic Design Method

This article summarized seismic design method of high-rise building from seismic fortification goal, use of materials, structural systems, analysis methods and trends. Then it discussed the structural design significance of high-rise buildings to achieve sustainable development. Lightweight quality, high strength material, diversity type, spatial component, braced lateral force resisting system, structuring combination and shock absorption building are the trends of high-rise building development.

Performance-Based Seismic Design Research of a Super High-Rise Building

2013 ◽  
Vol 353-356 ◽  
pp. 1875-1878
Author(s):  
Ling Huang
Keyword(s):  
Seismic Design ◽  
Design Research ◽  
Design Method ◽  
Optimal Solution ◽  
Performance Standards ◽  
High Rise ◽  
High Rise Building ◽  
Performance Based Seismic Design ◽  
Seismic Design Method ◽  
Computational Analyses

The application of performance-based seismic design method in super high-rise building is studied in this article. The two-stage design process of a super high-rise building is introduced. On the base of proposing the performance standards and objectives of the super high-rise building under earthquake actions of different levels, optimal solution is provided after computational analyses with different softwares. Computational analyses indicate that the design could satisfy all seismic fortification requirements and seismic performance objectives of China's seismic codes in force. The performance-based design idea can provide a reference for similar projects.

Key Points Analysis for Seismic Design of Super High-Rise Building

2013 ◽  
Vol 423-426 ◽  
pp. 1230-1233
Author(s):  
Ting Yu Mei ◽  
Lang Wu
Keyword(s):  
Seismic Design ◽  
Design Method ◽  
Response Spectrum ◽  
Time History ◽  
Stage Design ◽  
High Rise ◽  
High Rise Building ◽  
History Analysis ◽  
Key Points ◽  
And Performance

In recent years, high-rise buildings have developed very rapidly in our country. Because of the particularity of the high-rise building, more strictly technical measures should be taken in seismic design to ensure security. Three level fortifications, two stage design method have been used for seismic design in our country. Combined with the practical, the key points of response spectrum, time history analysis and performance design which related to seismic design of high-rise buildings were analyzed.

Emulation Analysis for Construction Process of High-Rise Building

2012 ◽  
Vol 490-495 ◽  
pp. 3032-3035
Author(s):  
Fang Qiong Pei ◽  
Qi Lin Zhang
Keyword(s):  
Structural Analysis ◽  
Process Design ◽  
Loading Condition ◽  
Design Method ◽  
Structural Deformation ◽  
Construction Process ◽  
High Rise ◽  
High Rise Building ◽  
Traditional Design ◽  
Shrinkage And Creep

Construction process design for high-rise building has been brought up by many researchers. In traditional design method, loads are applied to the structure once. Obviously, this is not the real loading condition. For concrete structure, shrinkage and creep during construction also effects on the structural deformation. An emulation analysis was done in this paper in an attempt to clarify the effect of construction process in structural analysis.

Automation of seismic design of high-rise structure with braced steel frame

2021 ◽  
Author(s):  
Xin Zhao ◽  
Gang Wang ◽  
Jinlun Cai ◽  
Junchen Guo
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Structural Design ◽  
Structure Design ◽  
Steel Frame ◽  
Design Methods ◽  
Automatic Design ◽  
Component Level ◽  
Design Algorithm ◽  
High Rise

<p>With the continuous development and progress of society, the structure of high-rise buildings has been paid more and more attention by the engineering community. However, the existing high- rise structure design methods often have a lot of redundancy and have a lot of room for optimization. Most of the existing seismic design methods of high-rise structures are based on engineering experience and manual iterative methods, so that the efficiency of design can not meet the needs of the society. if the method of design automation is adopted, the workload of designers can be greatly reduced and the efficiency of structural design can be improved. Based on the digital modeling theory, this paper proposes a MAD automatic design algorithm, in which the designer provides the initial design of the structure, and the algorithm carries out the modeling, analysis, optimization and design of each stage of the structure, and finally obtains the optimal structure. The structural design module of this algorithm starts from the component level, when the component constraint design meets the limit requirements of the specification, it enters and completes the component constraint design and the global constraint design of the structure in turn. In this paper, taking a ten-story braced steel frame high-rise structure as an example, the optimal design is carried out, and its seismic performance is analyzed. the results show that the MAD automatic design algorithm can distribute the materials to each part reasonably, which can significantly improve the seismic performance of the structure and realize the effective seismic design.</p>

scholarly journals 3D Modelling, Design and Safety Management in High Rise Building u sing Bim

2021 ◽  
Vol 11 (1) ◽  
pp. 41-50
Author(s):  
Mohammed Waheed ◽  
◽  
Mahmad Naheed ◽  
Parvez Patel ◽  
Syed Mubashir Hussain ◽  
...  
Keyword(s):  
Design Process ◽  
3D Modeling ◽  
Structural Design ◽  
Safety Management ◽  
Information Modeling ◽  
Analysis And Design ◽  
High Rise ◽  
High Rise Building ◽  
Traditional Design ◽  
Building Information

In this works 3D modeling, design and safety management of high rise building using building information modeling (BIM) technology is carried out.. Initially a AutoCAD plan with all its salient features is developed following byelaws of high rise building. Then the 3D modeling and rendering of high rise building is done in the Revit architecture of the 2D plan which is imported from the AutoCAD. The analysis and design of high rise building is carried out using ETabs software. Apart from the structural design Mechanical, Electrical and Plumbing (MEP) services design is carried out using BIM technology . The layout of fire safety system is specified efficiently with use of BIM in co-ordination with MEP services. The application of BIM based design process resulted in considerable time reduction in compression with traditional design process and the holistic design of the high rise building is carried out with the compatibility of different softwares.

The Analysis of Cantilever on Catastrophe to Irregular High-Rise Structure in Earthquake

2012 ◽  
Vol 166-169 ◽  
pp. 2364-2367
Author(s):  
Jia Hui Zhang ◽  
Zhong Ming Xiong ◽  
Zhi Qiang Chen ◽  
Ling Bo Kong
Keyword(s):  
Engineering Design ◽  
Seismic Response ◽  
Seismic Design ◽  
Building Structure ◽  
Reverse Effect ◽  
High Rise ◽  
Earthquake Action ◽  
Architectural Development

Anomalistic architecture especially overhanging structure has become a trend of architectural development, Based on the characteristics of a large vertical eccentric, more prominent facade and strong reverse effect,overhanging structure is often serious super-norm and extremely detrimental to the seismic design[1], Now it has become an important part of seismic review. By the analysis and comparison on the coupling of the translational and torsional seismic response from ANSYS program[2]. The behavior of seismic catastrophe of cantilever building structure is studied under bi-directional earthquake action and the change law of cantilever member with the length is obtained, the suggestions on engineering design are put forward for future seismic design of such structures.

Application of Long-Short-Pile Composite Foundation of High-Rise Building in Soft Soil

2012 ◽  
Vol 256-259 ◽  
pp. 57-60
Author(s):  
Rong Fang Song ◽  
Ling Yun Lang ◽  
Jing Wang
Keyword(s):  
Bearing Capacity ◽  
Calculation Method ◽  
Design Method ◽  
Soft Soil ◽  
Composite Foundation ◽  
Soft Ground ◽  
Design Calculation ◽  
Actual Measurement ◽  
High Rise ◽  
High Rise Building

A case of the long-short-pile composite foundation in liquefied soft soil under a 30-storey high-rise building is presented, in which the long and short piles are made of cement-flyash-gravel (CFG) and lime. A new design calculation method of bearing capacity and settlement of composite foundation is introduced, and the calculated value is compared with the actual measurement. The results show that the liquefaction of soft ground is eliminated and the demand of load and settlement for upper building is met. At the same time, it is proved that the design method is feasible.

Sign in / Sign up

Export Citation Format

Share Document