Optimization Design of Solar Hot Water System of Splited-Type Villa Type Building

2015 ◽  
Vol 733 ◽  
pp. 207-210
Author(s):  
Hai Jiang Xie ◽  
Yan Zhang

With economic performance, effect, energy saving, safe and reliable, comprehensive performance unique advantages, more suitable for use in building the popularity of the villa with its solar water heaters and other energy-saving and environmental protection and the use of simple distinctions, by the majority of consumers, and has been the rapid development and wide application. Solar hot water system is not only energy use, more important role is to improve the environment, to meet the needs of the country with regard to energy conservation, but also for China to improve the energy structure, but also improve energy strategy considerations. Introduces the domestic and foreign common form of split solar water heating systems, analyzes the existing problems and causes, solar and electric auxiliary heating system, for example, to optimize the design ideas proposed split solar hot water system, proved that the system is stable reliable

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1536
Author(s):  
Xilian Han ◽  
Chao Li ◽  
Hongqiang Ma

This paper proposed an experimental test: the solar water-heating system was been monitored for a whole year to analyze collector performance in an actual operation process. Heat-collecting efficiency, heating capacity, power consumption, and heat required were analyzed theoretically. Results showed that solar irradiance and ambient temperature were positively correlated with heat collection efficiency, and the daily average heat collection efficiency was up to 56.63%. In winter, the auxiliary heat source consumed the most power, almost all of which bears the heat of users. The heat collection in summer met the demand for hot water, and the guarantee rate of solar energy could reach 100%. The energy saving properties and CO2 emission reduction were analyzed. This system had a significant effect on the energy-saving effect and environmental protection. The analysis showed that the hot-water system can fully meet the design requirements under the condition of relatively sufficient solar energy, and can operate stably, which has a certain guiding significance for the design and application of large-scale solar hot-water systems.


2011 ◽  
Vol 224 ◽  
pp. 42-49
Author(s):  
Xiao Hui Du ◽  
Hai Shan Xia ◽  
Zhong Yi

During the integrated design of solar hot water system into high-rise residences, economy of solar hot water system directly effects its popularization and application. Combining with the concentrated solar water heating system on one high-rise residences, This paper tidies up the testing data on the June to October, and calculates solar insuring rate, auxiliary heat source heating rate and hot water cost at the different weather conditions, analyzes on the causes and provides some improvement advice, which will put forward the reference for architects to make the integrated design on the solar water heating system on high-rise residences.


2013 ◽  
Vol 291-294 ◽  
pp. 976-979
Author(s):  
Hui Xing Li ◽  
Wei Wang ◽  
Guo Hui Feng

Green residential building is energy conservation, environmental protection, healthy and comfortable and stress efficiency. Green building respects the local natural and humanities, climate. Adjust measures to local conditions, use local materials, so there is no definite construction patterns and rules. In this paper a green residential buildings from Shenyang, focus on the analysis of the well insulated building envelope, radiant floor heating system with control system, solar hot water system in the building. At the same time, analysis of the energy saving technology can reduce energy consumption and CO2 emissions compare with "Residential building energy saving design standards "at Liaoning area. The project gives some experience to other designers in the process of green buildings design and promotes it constructed in the northeastern regions.


1997 ◽  
Vol 119 (2) ◽  
pp. 126-133 ◽  
Author(s):  
A. H. Fanney ◽  
B. P. Dougherty

A novel solar water heating system was patented in 1994. This system uses photovoltaic cells to generate electrical energy that is subsequently dissipated in multiple electric resistive heating elements. A microprocessor controller continually selects the appropriate heating elements such that the resistive load causes the photovoltaic array to operate at or near maximum power. Unlike other residential photovoltaic systems, the photovoltaic solar water heating system does not require an inverter to convert the direct current supplied by the photovoltaic array to an alternating current or a battery system for storage. It uses the direct current supplied by the photovoltaic array and the inherent storage capabilities of a residential water heater. A photovoltaic solar hot water system eliminates the components most often associated with the failures of solar thermal hot water systems. Although currently more expensive than a solar thermal hot water system, the continued decline of photovoltaic cell prices is likely to make this system competitive with solar thermal hot water systems within the next decade. This paper describes the system, discusses the advantages and disadvantages relative to solar thermal water heating systems, reviews the various control strategies which have been considered, and presents experimental results for two full-scale prototype systems.


2012 ◽  
Vol 193-194 ◽  
pp. 30-33
Author(s):  
Xue Ying Wang ◽  
Dong Xu ◽  
Ya Jun Wu

This article analyzes the problem in application the solar system was used in residential building, puts forward the requirements to use energy and choose the setting of the solar energy collector from two aspects of building and drainage design respectively. In addition, the article explicates andthe solar energy collector and building integrated design and the development of solar energy collector. At last, the article puts forward some Suggestions on the improvement and development of residential solar hot water system and the design of the hot water supply bath solution of practice to make solar energy and low power assisted by night combining.


2013 ◽  
Vol 315 ◽  
pp. 783-787
Author(s):  
M.Yaakob Yuhazri ◽  
A.M. Kamarul ◽  
A.H. Rahimah ◽  
Sihombing Haeryip ◽  
S.H. Yahaya

This research is related to thermal efficient water heating system, specifically to improve the water heating system that exists nowadays. The goal of this research is to improve the current water heating system by using solar heat as the energy source to heat the water. The focus is to improve the thermal efficiency by adding different thermal boxes as the absorber bed. By implementing the black body and radiation concept, the air trapped in the box is heated. The trapped air then increases the collisions between the molecules and directly increases the temperature inside the box, higher than the outside environment. Based on a daytime experimental result revealed steel thermal box is better to be used for tropical weather like Malaysia.


2018 ◽  
Vol 210 ◽  
pp. 02023
Author(s):  
Jan Skovajsa ◽  
Martin Zálešák

The article deals with the economic evaluation of investment and optimization of the solar water heating system for family houses. From the point of view of solar systems, the optimal solution is based on the specific application of it. The design is dependent on the location of solar thermal collectors and ration between active aperture area and real daytime consumption. Common calculations according to actual standards often give overstated results, which also reflected in the value of the investments. The article presents the research of optimal parameters of the thermal solar system for preparing of domestic hot water. A combination of related standards and software TRNSYS are used to find optimal parameters. Thanks to created and verified simulation models, it is possible to design parameters so as to avoid under-dimensioning or over-dimensioning of the solar system. Energy price is another factor affects the payback period of investments. This is affected by the used energy sources and their combination. For example, buildings that use electricity to heat water or heating have different energy charges than a building that uses natural gas. So, the aim is to find technically and economically efficient solution.


2018 ◽  
Vol 175 ◽  
pp. 04029
Author(s):  
Yuyang Miao ◽  
Chenggang Liu ◽  
Xinjiang Huang

Energy consumption of HVAC system play a big role on the whole building energy usage. Recommissioning on HVAC system can improve build comfort and its performance. Taking the recommissioning of public office as an example, the issue of the energy consumption of HVAC system was found, control scheme of chilled and hot water system and AHUs was optimized, the new energy saving control scheme was determined, and the actual energy consumption was analysed. The result show that recommissioning for the public office building achieved obviously effect, and the rate of energy saving is 18%, 33% and 10% for chilled water, hot water and electricity, respectively.


A completed study of a solar hot water heating system installed in a school showed an annual average efficiency of 15%, the low efficiency largely caused by the unfavourable pattern of use in schools. Field studies, in 80 existing and 12 new houses, of a simple domestic hot water system have been initiated to ascertain the influence of the occupants on the actual performance of solar collector systems. The development of testing methods of solar collectors and solar water heating systems is being undertaken in close collaboration with the B.S.I. and the E.E.C. Solar space heating is being investigated in two experimental low energy house laboratories, one using conventional solar collectors with interseasonal heat storage and the other a heat pump with an air solar collector. Studies of the cost-effectiveness of solar collector applications to buildings in the U.K. show that they are far less cost-effective than other means of conserving energy in buildings.


Sign in / Sign up

Export Citation Format

Share Document