Degradation of Paracetamol by Fenton-Like Process in Conjunction with Sonication

2015 ◽  
Vol 737 ◽  
pp. 321-324
Author(s):  
Rong Yao Wang ◽  
Xi Kui Wang
Keyword(s):  
Response Surface Methodology ◽  
Synergistic Effect ◽  
Response Surface ◽  
Acoustic Power ◽  
Ultrasonic Cavitation ◽  
Sponge Iron ◽  
Optimum Conditions ◽  
Initial Ph

The degradation of the pharmaceutical paracetamol by using Fenton-like process in conjunction with ultrasonic cavitation was investigated. An evident synergistic effect was found in the combination of sonication and Fenton-like process. Through the application of Response Surface Methodology optimization, the optimum conditions for the degradation of paracetamol were initial pH 3.0, H2O27.0 mmol·L-1and sponge iron 4 g·L-1with acoustic power of 200 W. Under these parameters could obtain 99% degradation of 100mg·L-1paracetamol solution within 30 min treatment.

Optimization of photocatalytic degradation of real textile dye house wastewater by response surface methodology

2016 ◽  
Vol 74 (9) ◽  
pp. 1999-2009 ◽  
Author(s):  
Sayed Mohammad Bagher Hosseini ◽  
Narges Fallah ◽  
Sayed Javid Royaee
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Flow Rate ◽  
Advanced Oxidation Process ◽  
Influential Factor ◽  
P Value ◽  
Textile Dye ◽  
Optimum Conditions ◽  
Effective Parameters ◽  
Initial Ph

This study evaluates the advanced oxidation process for decolorization of real textile dyeing wastewater containing azo and disperse dye by TiO2 and UV radiation. Among effective parameters on the photocatalytic process, effects of three operational parameters (TiO2 concentration, initial pH and aeration flow rate) were examined with response surface methodology. The F-value (136.75) and p-value <0.0001 imply that the model is significant. The ‘Pred R-Squared’ of 0.95 is in reasonable agreement with the ‘Adj R-Squared’ of 0.98, which confirms the adaptability of this model. From the quadratic models developed for degradation and subsequent analysis of variance (ANOVA) test using Design Expert software, the concentration of catalyst was found to be the most influential factor, while all the other factors were also significant. To achieve maximum dye removal, optimum conditions were found at TiO2 concentration of 3 g L−1, initial pH of 7 and aeration flow rate of 1.50 L min−1. Under the conditions stated, the percentages of dye and chemical oxygen demand removal were 98.50% and 91.50%, respectively. Furthermore, the mineralization test showed that total organic compounds removal was 91.50% during optimum conditions.

Optimum Conditions of Ag/BiVO4 Photocatalytic Performance on Degradation of Paracetamol by Response Surface Methodology

2014 ◽  
Vol 1073-1076 ◽  
pp. 336-339
Author(s):  
Tian Qi Li ◽  
Hui Wang ◽  
Ya Qi Zhu ◽  
Zhao Yong Bian
Keyword(s):  
Response Surface Methodology ◽  
Visible Light ◽  
Response Surface ◽  
Visible Light Irradiation ◽  
Ph Value ◽  
Light Irradiation ◽  
Catalyst Loading ◽  
Optimum Conditions ◽  
Initial Ph ◽  
Ag Catalyst

Response surface methodology was applied to investigate the optimum degradation conditions of paracetamol using Ag/BiVO4 photocatalysts under the visible light irradiation. Experimental results show that the optimum degradation conditions were: catalyst dosage quantity was 80 mg, Ag-catalyst loading was 5%, and the initial pH value of the solution was 6, respectively. Under this condition, the degradation efficiency of paracetamol was 77.9% within 5 h under the visible light irradiation.

Electrocoagulation and nanofiltration integrated process application in purification of bilge water using response surface methodology

2016 ◽  
Vol 74 (3) ◽  
pp. 564-579 ◽  
Author(s):  
Ceyhun Akarsu ◽  
Yasin Ozay ◽  
Nadir Dizge ◽  
H. Elif Gulsen ◽  
Hasan Ates ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Removal Efficiency ◽  
Cod Removal ◽  
Positive Sign ◽  
Aluminum Electrode ◽  
Integrated Process ◽  
Bilge Water ◽  
Cod Removal Efficiency ◽  
Initial Ph

Marine pollution has been considered an increasing problem because of the increase in sea transportation day by day. Therefore, a large volume of bilge water which contains petroleum, oil and hydrocarbons in high concentrations is generated from all types of ships. In this study, treatment of bilge water by electrocoagulation/electroflotation and nanofiltration integrated process is investigated as a function of voltage, time, and initial pH with aluminum electrode as both anode and cathode. Moreover, a commercial NF270 flat-sheet membrane was also used for further purification. Box–Behnken design combined with response surface methodology was used to study the response pattern and determine the optimum conditions for maximum chemical oxygen demand (COD) removal and minimum metal ion contents of bilge water. Three independent variables, namely voltage (5–15 V), initial pH (4.5–8.0) and time (30–90 min) were transformed to coded values. The COD removal percent, UV absorbance at 254 nm, pH value (after treatment), and concentration of metal ions (Ti, As, Cu, Cr, Zn, Sr, Mo) were obtained as responses. Analysis of variance results showed that all the models were significant except for Zn (P > 0.05), because the calculated F values for these models were less than the critical F value for the considered probability (P = 0.05). The obtained R2 and Radj2 values signified the correlation between the experimental data and predicted responses: except for the model of Zn concentration after treatment, the high R2 values showed the goodness of fit of the model. While the increase in the applied voltage showed negative effects, the increases in time and pH showed a positive effect on COD removal efficiency; also the most effective linear term was found as time. A positive sign of the interactive coefficients of the voltage–time and pH–time systems indicated synergistic effect on COD removal efficiency, whereas interaction between voltage and pH showed an antagonistic effect.

Optimization of the Fermentation Conditions for 1-Deoxynojirimycin Production by Streptomyces lawendulae Applying the Response Surface Methodology

2011 ◽  
Vol 7 (3) ◽  
Author(s):  
Zhao-Jun Wei ◽  
Le-Chun Zhou ◽  
Hua Chen ◽  
Gui-Hai Chen
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Starch Content ◽  
Ultra Violet ◽  
Soluble Starch ◽  
High Yield ◽  
Yield Strain ◽  
Fermentation Time ◽  
Ethyl Sulfate ◽  
Initial Ph

Moranoline (1-Deoxynojirimycin, DNJ) is a piperidine alkaloid, and shows high inhibit activities to glucoamylase and ?-glucosidase. One DNJ high-yield strain of Streptomyces lawendulae was obtained after isolated form soil and mutated with the ultra violet (UV) and ethyl sulfate (DES), which named as TB-412, and can produce DNJ with 35.925 mg/L. Response surface methodology (RSM) was applied to optimize the parameters of DNJ yield from S. lawendulae TB-412. The effects of independent variables of fermentation, including time, temperature, initial pH and the soluble starch content were investigated. The statistical analysis showed that the fermentation time, pH and the soluble starch content, and the quadratics of time, temperature, pH and the soluble starch content, as well as the interactions between fermentation time and pH, and time and the soluble starch content, showed significant effects on DNJ yield. The optimal process parameters for DNJ production within the experimental range of the variables researched was at 11d, 27 °C, pH 7.5, and 8% soluble starch content. At this condition, the DNJ yield was predicted to be 42.875 mg/L.

scholarly journals Enzyme optimization to reduce the viscosity of pitanga (Eugenia uniflora L.) juice

2016 ◽  
Vol 19 (0) ◽  
Author(s):  
Ricardo Schmitz Ongaratto ◽  
Luiz Antonio Viotto
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Incubation Time ◽  
Regression Models ◽  
Incubation Temperature ◽  
Correlation Coefficients ◽  
Enzyme Concentration ◽  
Optimum Conditions ◽  
Activity Time ◽  
Independent Variables

Summary The aim of this work was to separately evaluate the effects of pectinase and cellulase on the viscosity of pitanga juice, and determine the optimum conditions for their use employing response surface methodology. The independent variables were pectinase concentration (0-2.0 mg.g–1) and cellulase concentration (0-1.0 mg.g–1), activity time (10-110 min) and incubation temperature (23.2-56.8 °C). The use of pectinase and cellulase reduced the viscosity by about 15% and 25%, respectively. The results showed that enzyme concentration was the most important factor followed by activity time, and for the application of cellulase the incubation temperature had a significant effect too. The regression models showed correlation coefficients (R2) near to 0.90. The pectinase application conditions that led to the lowest viscosity were: concentration of 1.7 mg.g–1, incubation temperature of 37.6 °C and incubation time of 80 minutes, while for cellulase the values were: concentration of 1.0 mg.g-1, temperature range of 25 °C to 35 °C and incubation time of 110 minutes.

scholarly journals OPTIMIZATION OF REFLUX EXTRACTION FOR CAESALPINIA SAPPAN LINN. WOOD BY USING RESPONSE SURFACE METHODOLOGY

2020 ◽  
Vol 83 (1) ◽  
pp. 85-92
Author(s):  
Mohd Azahar Mohd Ariff ◽  
Muhammad Syafiq Abd Jalil ◽  
Noor ‘Aina Abdul Razak ◽  
Jefri Jaapar
Keyword(s):  
Particle Size ◽  
Response Surface Methodology ◽  
Drinking Water ◽  
Response Surface ◽  
Extraction Time ◽  
Percentage Error ◽  
Optimum Conditions ◽  
Caesalpinia Sappan ◽  
The Mean ◽  
Repeated Runs

Caesalpinia sappan linn. (CSL) is a plant which is also known as Sepang tree contains various medicinal values such as to treat diarrhea, skin rashes, syphilis, jaundice, drinking water for blood purifying, diabetes, and to improve skin complexion. The aim of this study is to obtain the most optimum condition in terms of the ratio of sample to solvent, particle size, and extraction time to get the highest amount of concentration of the CSL extract. In this study, the ranges of each parameters used were: ratio sample to solvent: 1.0:20, 1.5:20, 2.0:20, 2.5:20, 3.0:20, particle size: 1 mm, 500 um, 250 um, 125 um, 63 um, and extraction time: 1 hr, 2 hr, 3 hr, 4 hr, 5 hr. The concentration was analyzed using a UV-vis spectrophotometer. The optimum conditions were obtained by response surface methodology. From the design, 20 samples were run throughout this experiment. The optimized value from the RSM were 2.0:20 for ratio sample to solvent, 125 µm of particle size and 2.48 hours with the concentration of 37.1184 ppm. The accuracy of the predictive model was validated with 2 repeated runs and the mean percentage error was less than 3%. This confirmed the model’s capability for optimizing the conditions for the reflux extraction of CSL’s wood.

scholarly journals Optimising Brewery-Wastewater-Supported Acid Mine Drainage Treatment vis-à-vis Response Surface Methodology and Artificial Neural Network

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1485
Author(s):  
Enoch A. Akinpelu ◽  
Seteno K. O. Ntwampe ◽  
Abiola E. Taiwo ◽  
Felix Nchu
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Response Surface Methodology ◽  
Acid Mine Drainage ◽  
Response Surface ◽  
Mine Drainage ◽  
Sulphate Reduction ◽  
Optimum Conditions ◽  
Acid Mine ◽  
Artificial Neural

This study investigated the use of brewing wastewater (BW) as the primary carbon source in the Postgate medium for the optimisation of sulphate reduction in acid mine drainage (AMD). The results showed that the sulphate-reducing bacteria (SRB) consortium was able to utilise BW for sulphate reduction. The response surface methodology (RSM)/Box–Behnken design optimum conditions found for sulphate reduction were a pH of 6.99, COD/SO42− of 2.87, and BW concentration of 200.24 mg/L with predicted sulphate reduction of 91.58%. Furthermore, by using an artificial neural network (ANN), a multilayer full feedforward (MFFF) connection with an incremental backpropagation network and hyperbolic tangent as the transfer function gave the best predictive model for sulphate reduction. The ANN optimum conditions were a pH of 6.99, COD/SO42− of 0.50, and BW concentration of 200.31 mg/L with predicted sulphate reduction of 89.56%. The coefficient of determination (R2) and absolute average deviation (AAD) were estimated as 0.97 and 0.046, respectively, for RSM and 0.99 and 0.011, respectively, for ANN. Consequently, ANN was a better predictor than RSM. This study revealed that the exclusive use of BW without supplementation with refined carbon sources in the Postgate medium is feasible and could ensure the economic sustainability of biological sulphate reduction in the South African environment, or in any semi-arid country with significant brewing activity and AMD challenges.

Optimization of Culture Conditions for Cold-Active Cellulase Production by Penicillium cordubense D28 Using Response Surface Methodology

2011 ◽  
Vol 183-185 ◽  
pp. 994-998
Author(s):  
Shuo Dong ◽  
Nai Yu Chi ◽  
Qing Fang Zhang
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Cellulase Activity ◽  
Cellulase Production ◽  
Culture Conditions ◽  
Batch Reactors ◽  
Corn Meal ◽  
Cold Active ◽  
Initial Ph ◽  
Cost Efficient

The design of an optimum and cost-efficient medium for production of cold-active cellulase by Penicillium cordubense D28 was attempted by using response surface methodology (RSM). Based on the Plackett–Burman design, corn meal, (NH4)2SO4 and branc were selected as the most critical nutrient. Subsequently, they were investigated by the Box-Behnken design. Results showed that the maximum cold-active cellulase activity of 110.4U/mL was predicted when the concentration of corn meal, (NH4)2SO4 and branc were 21.97 g/L, 2.39 g/L and 14.99 g/L, respectively. The results were further verified by triplicate experiments. The batch reactors were operated under an optimized condition of the respective corn meal, (NH4)2SO4 and branc concentration of 22 g/L , 2.4 g/L and 15 g/L , the initial pH of 6.0 and experimental temperature of 20 ± 1°C. Without further pH adjustment, the maximum cold-active cellulase activity of 109.8 U/mL was obtained based on the optimized medium with further verified the practicability of this optimum strategy.

Sign in / Sign up

Export Citation Format

Share Document