Experimental Studies on Air Foil Thrust Bearing Load Capabilities Considering the Effect of Foil Configuration

2015 ◽  
Vol 813-814 ◽  
pp. 1007-1011
Author(s):  
R.N. Ravikumar ◽  
K.J. Rathanraj ◽  
V. Arun Kumar
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Experimental Studies ◽  
Ambient Air ◽  
Outer Edge ◽  
Foil Thickness ◽  
Foil Bearings ◽  
Load Carrying ◽  
Turbo Machinery ◽  
Foil Thrust Bearing

Abstract. Foil bearings are self-acting hydrodynamics bearings used to support lightly loaded high speed rotating machinery. The advantages that they offer to process fluid lubricated machines usingworking fluid as a lubricant (ambient air) physically non-contacting high speed operation. Foil bearings have been considered as an alternative to conventional bearings with the capacity to cater for high-speeds and hostile environment (high temperature). However, the lack of load carrying capacity at relatively lower speeds limits their applications in heavy turbo machinery and as such are highly suitable in lightly loaded, high speed turbo machinery like small gas turbines.This paper discusses the design and assessment of dynamic characteristics in terms of load carrying capabilities as a function of speed, gap between the bearing and the runner as well as shape of foils for an air foil thrust bearing. The effects of various bearing parameters like foil thickness, number of foils fixed circumferentially and along the axis of rotation and with foil geometry configuration. Characteristics of performance defined essentially in terms of load carrying capabilities and static stiffness have been used for evaluation. Experiments were conducted both for angular foils (with inner edge height less than outer edge height) and square foils by varying number of foils. The experimental results shows that the effect of foil configuration enhances the load carrying capabilities of air foil thrust bearing.

Numerical and experimental studies on the thermal and static characteristics of multi-leaf foil thrust bearing

2021 ◽  
pp. 135065012110110
Author(s):  
Yu Guo ◽  
Yu Hou ◽  
Qi Zhao ◽  
Xionghao Ren ◽  
Shuangtao Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Failure Process ◽  
Experimental Studies ◽  
Elastic Model ◽  
Static Characteristics ◽  
Bearing Load ◽  
Foil Thrust Bearing ◽  
Cooling Air

Foil bearing is considered to be a promising supporting technology in high-speed centrifugal machinery. Due to the high-speed shearing effect in the viscous lubricant film, heat generation could not be ignored. In this paper, a thermo-elastic model of the multi-leaf foil thrust bearing is proposed to predict its thermal and static characteristics. In the model, modified Reynolds equation, energy equation, and Kirchhoff equation are solved in a coupling way. The contact area between the foil and welding plate is taken into account. Besides, the effect of cooling air on the bearing temperature is investigated. The ultimate load capacity and transient overload failure process of the bearing is analyzed and discussed. The effect of rotation speed on the bearing temperature is more obvious than that of the bearing load. The bearing temperature drops obviously by introducing the cooling air, and the cooling effect is improved with the supply pressure. The transient overload failure of the bearing occurs when the bearing load exceeds the ultimate value.

On the performance of foil thrust bearing with misaligned bearing runner

2017 ◽  
Vol 69 (2) ◽  
pp. 105-115 ◽  
Author(s):  
Abdelrasoul M. Gad
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Approximation Technique ◽  
Hydrodynamic Effect ◽  
Stable Operation ◽  
Content Type ◽  
Thrust Bearings ◽  
Load Carrying ◽  
Foil Thrust Bearing ◽  
Stiffness And Damping

Purpose Compliant foil thrust bearings are promising bearings for high-speed oil-free turbomachinery. However, most previous experimental and numerical approaches to investigate the performance of these bearings have ignored the effect of bearing runner misalignment. Therefore, this paper aims to evaluate the effects of static and dynamic angular misalignments of the bearing runner on the performance of a gas-lubricated foil thrust bearing. Design/methodology/approach The bearing runner is allowed a maximum angular misalignment that produces a minimum gas film thickness as low as 20 per cent of the nominal clearance. Then, the variations of bearing load carrying capacity, viscous power loss and stiffness and damping coefficients of the gas film with runner misalignment are thoroughly analyzed. The flow in the gas film is modeled with compressible Reynolds equation along with the Couette approximation technique, and the deformation of the compliant bearing is calculated with a robust analytical model. Small perturbations method is used to calculate the force and moment dynamic coefficients of the gas film. Findings The results show that misaligned foil thrust bearings are capable of developing a restoring moment sufficient enough to withstand the imposed misalignments. Furthermore, the enhanced hydrodynamic effect ensures a stable operation of the misaligned bearing, and the results highlighted the role of the compliant bearing structure to maintain foil bearing prominent features even at misaligned conditions. Originality/value The value of this study is the evaluation of the effects of runner angular misalignments on the static and dynamic characteristics of Generation II bump-type foil thrust bearing.

Development of Foil Thrust Bearings with Simple Structure for Micro Turbines

2011 ◽  
Vol 368-373 ◽  
pp. 1392-1395 ◽  
Author(s):  
Quan Zhou ◽  
Yu Hou ◽  
Ru Gang Chen
Keyword(s):  
High Speed ◽  
Simple Structure ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Complicated Structure ◽  
Thrust Bearings ◽  
Foil Bearings ◽  
Rotational Systems ◽  
Micro Turbine ◽  
Foil Thrust Bearing

Because of the low power loss and high stability, foil bearings are suitable lubrication components for high speed rotational systems. At present, the foil bearings used in actual applications almost have complicated structure and are hard to manufacture. In this paper, two kinds of foil thrust bearings with simple structure are presented. Configurations of these two foil thrust bearings are introduced; meanwhile, the load capacity and running stability are also tested in a high speed micro turbine. It is shown that viscoelastic supported foil thrust bearing has higher load capacity and hemisphere convex dots supported foil thrust bearing is more stable in high speed operational condition.

On the Design, Manufacture, and Premature Failure of a Metal Mesh Foil Thrust Bearing—How Concepts That Work on Paper, Actually Do Not

2018 ◽  
Vol 140 (12) ◽  
Author(s):  
Travis A. Cable ◽  
Luis San Andrés
Keyword(s):  
Thrust Bearing ◽  
Ambient Air ◽  
Material Damping ◽  
Rotor Speed ◽  
Metal Mesh ◽  
Premature Failure ◽  
Foil Bearings ◽  
Light Load ◽  
Design And Manufacturing ◽  
Foil Thrust Bearing

Oil-free microturbomachinery (OFT) implements compliant foil bearings because of their minute drag and ability to operate in extreme (high or low) temperature. Prominent to date, bump-foil thrust bearings integrate an underspring thin metal structure that provides resilience and material damping, and while the rotor is airborne, it acts in series with the stiffness and damping of the gas film. The design and manufacturing of foil bearings remain costly as it demands extensive engineering and actual experience. Alternative foil bearing configurations, less costly and easier to manufacture, are highly desirable to enable widespread usage of OFT. This paper details the design and manufacturing of a novel Rayleigh-step metal mesh foil thrust bearing (MMFTB) as well as its testing on a dedicated rig. Metal mesh structures offer significant material structural damping and can be easily procured at a fraction of the cost of a typical bump-foil strip layer. The MMFTB consists of a solid carrier, a number of stacked annular copper mesh sheets (wire diameter = 0.25, 0.3, and 0.41 mm), and a steel top foil (0.127 mm thick) that makes six pads (ID = 50.8 mm, OD =2 ID), each 45 deg in extent. A 3 μm polymer coats each pad, and a photochemical process etches a step 20 μm in height. Static and dynamic load measurements (without rotor speed) demonstrate that the MMFTB has structural stiffness and material damping similar to that of a publicized bump-type foil thrust bearing. A maiden test of the MMFTB with rotor speed of Ω = 15 krpm (∼80 m/s at bearing outer diameter (OD)) proved briefly the bearing operation when applying a tiny thrust load. Further tests with ambient air, a rotor speed of 40 krpm (∼212 m/s at bearing OD), and a very light load/area <7 kPa failed several of the prototype bearings, all exhibiting significant wear on one or more pads. The source of the failure is the inherent unevenness of the metal mesh stacked substructures, thus causing the pads to bulge toward the rotor collar surface before a load applies. A deficient anchoring method exacerbates the unevenness. Incidentally, a high rotor speed induced large windage that lifted the top foils pushing them against the spinning collar. As the bearing moved toward the rotating collar to begin applying thrust, the local high spots rubbed against the collar before a hydrodynamic wedge could form to separate the surfaces. Without a robust sacrificial coating, metal-to-metal contact quickly disfigured the contacting top foil pads, erasing the etched step, and leading to failure. In concept, and on paper, the mesh sheets and the top foil lay flat against the bearing carrier, giving a false sense of uniformity in the design process. In actuality, a designer must consider the manufactured states of the individual components and how they assemble. A redesign of the bearing intends to overcome the existing flaws (highlighted herein) by incorporating a thicker top foil that is well anchored (to better withstand the effects of windage), a robust sacrificial coating, and a hydrodynamic wedge accomplished via a circumferential taper on each pad.

Novel Thrust Foil Bearing With Pocket Grooves for Enhanced Static Performance

2021 ◽  
Vol 143 (11) ◽  
Author(s):  
Nguyen LaTray ◽  
Daejong Kim
Keyword(s):  
Film Thickness ◽  
Power Loss ◽  
High Speed ◽  
Thrust Bearing ◽  
Test Results ◽  
Foil Bearing ◽  
Load Carrying ◽  
Low Load ◽  
Static Performance ◽  
Foil Thrust Bearing

Abstract The integration of foil bearing technology into high-speed oil-free machines has been slow in progress, in part, due to the low load-carrying capacity of the foil thrust bearing. It is crucial this issue is addressed through innovative solutions without overcomplicating the bearing design because simplicity is one of the attractive features of the foil bearing. This work presents novel thrust foil bearing with taper-flat configuration and pocket grooves on the bearing top foil as a secondary pressure boosting mechanism. Parametric study of the pocket dimensions on a rigid bearing reveals that the bearing static performance is the most sensitive to the pocket angular span. Further two-dimensional fluid–structure interaction analyses on foil thrust bearing predict a reduction of power loss by 10% with increased average film thickness. Minimum film thickness also increases when the bearing is lightly loaded but it is reduced 20% at the taper-flat transition area under high loading condition. This issue can be overcome by using stiffer bump foil; however, this is not implemented in this work due to other design constraints. Test results at 90,000 rpm and 140,000 rpm show, by adding the pocket groove pattern on the top foil, the power loss is reduced by 16% compared to the traditional taper-flat configuration.

On the Design, Manufacture and Premature Failure of a Metal Mesh Thrust Bearing: How Concepts That Work on Paper, Actually Do Not

2018 ◽  
Author(s):  
Travis A. Cable ◽  
Luis San Andrés
Keyword(s):  
Thrust Bearing ◽  
Ambient Air ◽  
Material Damping ◽  
Rotor Speed ◽  
Metal Mesh ◽  
Premature Failure ◽  
Foil Bearings ◽  
Light Load ◽  
Design And Manufacturing ◽  
Foil Thrust Bearing

Oil-free micro turbomachinery (OFT) implements compliant foil bearings because of their minute drag and ability to operate in extreme (high or low) temperature. Prominent to date, bump-type foil bearings integrate an underspring thin metal structure that provides resilience and material damping; and while the rotor is airborne, acts in series with the stiffness and damping of the gas film. The design and manufacturing of foil bearings remains costly as it demands of extensive engineering and actual experience. Alternative foil bearing configurations, less costly and easier to manufacture, are highly desirable to enable widespread usage of OFT. This manuscript details the design and manufacturing of a novel Rayleigh-step metal mesh foil thrust bearing (MMFTB) as well as its testing on a dedicated rig. Metal mesh structures offer significant material structural damping and can be easily procured at a fraction of the cost of a typical bump foil strip layer. The MMFTB consists of a solid carrier, a number of stacked annular Copper mesh sheets (wire diameter = 0.25, 0.3 and 0.41 mm), and a steel top foil (0.127 mm thick) that makes six pads (ID = 50.8 mm, OD = 2 ID), each 45° in extent. A 3 μm polymer coats each pad and a photo-chemical process etches a step 20 μm in height. Static and dynamic load measurements (without rotor speed) demonstrate the MMFTB has structural stiffness and material damping similar to that of a publicized bump-type foil thrust bearing. A maiden test of the MMFTB with rotor speed of Ω = 15 krpm (∼80 m/s at bearing outer diameter) proved briefly the bearing operation when applying a tiny thrust load. Further tests with ambient air, a rotor speed of 40 krpm (∼212 m/s at bearing OD), and a very light load/area < 7 kPa failed several of the prototype bearings, all exhibiting significant wear on one or more pads. The source of the failure is the inherent unevenness of the metal mesh stacked substructures, thus causing the pads to bulge towards the rotor collar surface before a load applies. A deficient anchoring method exacerbates the unevenness. Incidentally, a high rotor speed induced large windage that lifted the top foils pushing them against the spinning collar. As the bearing moved towards the rotating collar to begin applying thrust, the local high spots rubbed against the collar, before a hydrodynamic wedge could form to separate the surfaces. Without a robust sacrificial coating, metal-to-metal contact quickly disfigured the contacting top foil pads, erasing the etched step, and leading to failure. In concept, and on paper, the mesh sheets and the top foil lay flat against the bearing carrier, giving a false sense of uniformity in the design process. In actuality, a designer must consider the manufactured states of the individual components and how they assemble. A redesign of the bearing intends to overcome the existing flaws (highlighted herein) by incorporating a thicker top foil that is well anchored (to better withstand the effects of windage), a robust sacrificial coating, and a hydrodynamic wedge accomplished via a circumferential taper on each pad.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

On the Performance of Hybrid Foil-Magnetic Bearings

1999 ◽  
Vol 122 (1) ◽  
pp. 73-81 ◽  
Author(s):  
H. Heshmat ◽  
H. Ming Chen ◽  
J. F. Walton,
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
Magnetic Bearing ◽  
Journal Bearings ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Magnetic Elements ◽  
Load Carrying ◽  
Hybrid Bearing

Recent technological advancements make hybridization of the magnetic and foil bearings both possible and extremely attractive. Operation of the foil/magnetic bearing takes advantage of the strengths of each individual bearing while minimizing each other’s weaknesses. In this paper one possible hybrid foil and magnetic bearing arrangement is investigated and sample design and operating parameters are presented. One of the weaknesses of the foil bearings, like any hydrodynamic bearing, is that contact between the foil bearing and the shaft occurs at rest or at very low speeds and it has low load carrying capacity at low speeds. For high speed applications, AMBs are, however, vulnerable to rotor-bending or structural resonances that can easily saturate power amplifiers and make the control system unstable. Since the foil bearing is advantageous for high speed operation with a higher load carrying capacity, and the magnetic bearing is so in low speed range, it is a natural evolution to combine them into a hybrid bearing system thus utilizing the advantages of both. To take full advantage of the foil and magnetic elements comprising a hybrid bearing, it is imperative that the static and dynamic characteristics of each bearing be understood. This paper describes the development of a new analysis technique that was used to evaluate the performance of a class of gas-lubricated journal bearings. Unlike conventional approaches, the solution of the governing hydrodynamic equations dealing with compressible fluid is coupled with the structural resiliency of the bearing surfaces. The distribution of the fluid film thickness and pressures, as well as the shear stresses in a finite-width journal bearing, are computed. Using the Finite Element (FE) method, the membrane effect of an elastic top foil was evaluated and included in the overall analytical procedure. Influence coefficients were generated to address the elasticity effects of combined top foil and elastic foundation on the hydrodynamics of journal bearings, and were used to expedite the numerical solution. The overall program logic proved to be an efficient technique to deal with the complex structural compliance of various foil bearings. Parametric analysis was conducted to establish tabulated data for use in a hybrid foil/magnetic bearing design analysis. A load sharing control algorithm between the foil and magnetic elements is also discussed. [S0742-4795(00)01201-1]

The Static Characteristics of Bump Foil Thrust Bearing Considering Tilting Condition

2009 ◽  
Author(s):  
Tae-Young Kim ◽  
Dong-Jin Park ◽  
Yong-Bok Lee
Keyword(s):  
High Efficiency ◽  
Thrust Bearing ◽  
Numerical Models ◽  
Load Capacity ◽  
Static Characteristics ◽  
Thrust Bearings ◽  
Foil Bearings ◽  
Foil Thrust Bearing ◽  
Thrust Pad ◽  
Air Film

Air foil thrust bearings are the critical component available on high-efficiency turbomachinery which needs ability to endure the large axial force. Previous investigations about the static characteristics were obtained over the region of the thin air film using finite-difference method and the characteristics of the corrugated bump foil using finite-element method. Moreover, a recent study demonstrated that bearing performance is sensitive to tilting thrust pad condition. In this study, experimentally measured bearing static characteristics are compared with the numerical model of the foil thrust bearing considering tilting pad condition. Three geometrically different type foil bearings were tested to measure their load capacity under tilting conditions that have continuous angles from zero to 0.0002 rad. These data are presented for use i1n the development of more accurate foil thrust bearing numerical models.

Sign in / Sign up

Export Citation Format

Share Document