Research on Construction Control of Long-Span Prestressed Concrete Continuous Girder Bridge

2014 ◽  
Vol 1030-1032 ◽  
pp. 843-846 ◽  
Author(s):  
He An Wan
Keyword(s):  
Prestressed Concrete ◽  
Simulation Analysis ◽  
Effective Control ◽  
Highway Bridge ◽  
Construction Control ◽  
Construction Process ◽  
Long Span ◽  
Computational State ◽  
Continuous Girder Bridge ◽  
Girder Bridge

On the background of 318 highway bridge of the Yinjiang Jihan Navigation Project, it introduces the methods and contents of the construction control of long-span prestressed concrete continuous girder bridge, it adopts Midas/Civil softwares to have a simulation analysis and effective control for the construction process of whole bridge. The result indicates that safety of the bridge construction, linear and the variation of prestress are all in control. Finally, the condition of structure of bridge suits for computational state theoretically.

Prestressed Concrete Continuous Girder Bridge Reinforcement Simulation Analysis and Carrying Capacity Assessment

2012 ◽  
Vol 594-597 ◽  
pp. 1516-1521
Author(s):  
Ling Yu ◽  
Tie Zhu Qiao ◽  
Long Sheng Bao ◽  
Guang Shan Zhu
Keyword(s):  
Compressive Stress ◽  
Cross Section ◽  
Prestressed Concrete ◽  
Carrying Capacity ◽  
Simulation Analysis ◽  
Tension Stress ◽  
Reinforced Concrete Structure ◽  
Standard Requirement ◽  
Continuous Girder Bridge ◽  
Girder Bridge

This article simulates prestressed concrete continuous girder bridge reinforced many times and evaluates carrying capacity after reinforcement. Taking the FuFeng bridge for an example, we analyze the bridge’s stress state in using by Midas software, evaluate the concrete ability of crack resistance, check the reinforced concrete structure ultimate carrying capacity, the cracking resistance and the stiffness, assess reinforcement effect and verify the accuracy and reliability of the simulation results. The maximum main compressive stress, maximum compressive stress, maximal main tensile stress and maximum tension stress of mid-span cross-section of the bridge are 1.6Mpa, 1.6Mpa, 0.3~0.5Mpa, and -1.2Mpa respectively, the mid-span center cross-section of deflection is 2.89cm. Reinforcement suppresses the development and expansion of the crack; the mid-span deflection tends to stabilize; the ultimate bearing capacity meets the Standard requirement basically; the emergency capacity is not enough; and the car whose weight over 55 tons is prohibited from passing.

scholarly journals The Application of the Grey Neural Network in the Deflection Control of PC Rigid Frame Continuous Box Girder Bridges

2014 ◽  
Vol 8 (1) ◽  
pp. 416-419
Author(s):  
Lifeng Wang ◽  
Hongwei Jiang ◽  
Dongpo He
Keyword(s):  
Neural Network ◽  
Prestressed Concrete ◽  
Control Process ◽  
Construction Control ◽  
Box Girder Bridges ◽  
Girder Bridges ◽  
Rigid Frame ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Cantilever Construction

Deflection control is the crucial procedure in construction control of cantilever prestressed concrete continuous girder bridge. This paper summarizes the advantages of Grey theory’s poor information processing and abilities of Neural Network’s self-learning and adaption, and the combinational algorithm of grey Neural Network is applied to the prestressed concrete bridge cantilever construction control process. Firstly, GM (1, 1) model and BP artificial Neural Network algorithm to predict the elevation of construction process are introduced respectively. In addition, the elevation prediction model of rigid-framed-continuous girder bridge is established. By practicing in the construction control project of LongHua Bridge, the method is testified to be feasible. The results indicate that, the combinational algorithm of Gray Neural Network to predict the construction elevation has higher reliability and accuracy which can be an effective tool of construction control for the same type bridges.

Study on Crack Causes and Strengthening Measures of Large Span PC Continuous Box Girder Bridges

2010 ◽  
Vol 163-167 ◽  
pp. 3551-3554
Author(s):  
Wei Peng ◽  
Zhi Xiang Zha
Keyword(s):  
Prestressed Concrete ◽  
Load Test ◽  
Box Girder Bridges ◽  
Element Analysis ◽  
Box Girder ◽  
Girder Bridges ◽  
Long Span ◽  
Concrete Box Girder Bridges ◽  
Girder Bridge ◽  
Engineering Projects

This template Based on cracks observation and finite element analysis of real engineering projects as well as bridge load test after reinforcement, causes and types of cracks in prestressed concrete box girder bridges and treating measurements are systematically studied. The results obtained from the calculation are presented to demonstrate the effect of sensitive factors, such as arrangement of longitudinal prestressed tendons, the magnitude of vertical prestressed force, temperature gradient, etc. The results show that the arrangement of longitudinal prestressed tendons and the magnitude of vertical prestressed force take key roles in cracks control of box girder webs. Lots of treating measurements are presented in accordance with different types of cracks, some of them are applied to a reinforcement engineering of a long span pretressed concrete continuous box girder bridge with cracks. Load test after reinforcement of the bridge demonstrates the reasonability of the treating measurements. Several design recommendations and construction measures about reinforcements and some sensitive factors mentioned above are proposed to control cracks.

Research on Monitoring Technology of Long-Span Prestressed Concrete Construction

2012 ◽  
Vol 170-173 ◽  
pp. 3145-3152
Author(s):  
Ji Liang Liu ◽  
Ming Jin Chu ◽  
Shu Dong Xu ◽  
Ying Ying Yin
Keyword(s):  
Finite Element ◽  
Prestressed Concrete ◽  
Concrete Beam ◽  
Simulation Analysis ◽  
Reference Value ◽  
Element Model ◽  
Construction Process ◽  
Finite Element Software ◽  
Prestressed Concrete Beam ◽  
Comprehensive Service

The author performs simulation analysis on construction process of roofing prestressed concrete beam of comprehensive service center in Beijing Institute of Civil Engineering and Architecture by finite element software Midas/Gen, so as to determine the monitoring programme according to the analysis results. The monitoring results indicate that the structure is safe; the theoretical value of simulation analysis is well matched with actual monitoring value, which means that the finite element model of construction process of roofing prestressed concrete beam is correct, the simulation method is feasible and the construction process is reasonable. It has important reference value for construction and monitoring of subsequent similar projects.

Load Test Analysis of Long-Span Prestressed Concrete Continuous Beam Bridge

2014 ◽  
Vol 1030-1032 ◽  
pp. 798-801
Author(s):  
Hua Su
Keyword(s):  
Bearing Capacity ◽  
Prestressed Concrete ◽  
Highway Bridges ◽  
Load Test ◽  
Beam Model ◽  
Test Analysis ◽  
Single Beam ◽  
Long Span ◽  
Continuous Beam Bridge ◽  
Girder Bridge

This paper takes a 45+60+45m prestressed concrete continuous box Girder Bridge as background, based on “Specification for Inspection and Evaluation of Load-bearing Capacity of Highway Bridges” (JTG/T J21-2011), single beam model and solid model are built for schematic design of load test. Compare the measured value and the theoretical value, and evaluate the bridge bearing capacity, finally provide technical base for project checking and accepting.

Mechanics Analysis and Construction Method of Prestressed Concrete Pipe

2013 ◽  
Vol 351-352 ◽  
pp. 30-33
Author(s):  
Wei Wu ◽  
Jing Ji
Keyword(s):  
Prestressed Concrete ◽  
Simulation Analysis ◽  
External Pressure ◽  
Construction Process ◽  
Work Process ◽  
Finite Element Software ◽  
Concrete Pipe ◽  
Mechanics Analysis ◽  
Analysis Design ◽  
Design And Construction

Simulation analysis on prestressed concrete pipe was carried out by using finite element software ANSYS. The internal and external pressure which the pipeline is subject to is simulated in real work process, and deformation and stress distribution of building pipeline structure are got. We have great understanding in the mechanical properties, at the same time give a detailed introduction for the prefabrication and on-site construction process. Three aspects in this paper for analysis, design and construction can provide safe and reliable reference for design and construction of similar pipeline structure.

Long Span Prestressed Concrete Continuous Rigid-Frame Bridge ANN Construction Control

2012 ◽  
Vol 204-208 ◽  
pp. 2261-2264
Author(s):  
Geng Feng Ren ◽  
Cun Jun Zou ◽  
Yue Xu
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Prestressed Concrete ◽  
Construction Control ◽  
Bridge Construction ◽  
Long Span ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Artificial Neural ◽  
Rigid Frame Bridge

Based on the theory of ANN (Artificial Neural Network),The paper raised the method of construction control, and introduced the common forecasting method. According to the characteristic of ANN itself and the complexity of factors which influence the elevation, the paper analysed the influence aspects of ANN. On the promise of bridge construction precision, the paper raised section measure、elasticity model、temperature、delay of construction and cantilever for neural network’s input vector in bridge construction process. With the help of Graphical User Interface, built ANN, made the forecast function in the bridge construction into reality. Introduce the theory of Artificial Neural Network(ANN) into long span prestressed concrete continuous rigid-frame bridge construction control.

Procedure Inversion Effect Analysis of Final System Transformation of Prestressed Concrete Continuous Girder Bridge

2014 ◽  
Vol 501-504 ◽  
pp. 1323-1327
Author(s):  
Xu Luo ◽  
Lu Rong Cai
Keyword(s):  
Stress Distribution ◽  
Prestressed Concrete ◽  
Steel Beams ◽  
System Transformation ◽  
Box Girder ◽  
Pull Out ◽  
Temporary Support ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Prestressing Loss

When the cantilever construction is adopted by the prestressed concrete continuous girder bridge, the order of two key procedures between removing temporary support and tensing remanent prestressed cable is used to be ignored. In order to study the influence of procedure inversion, the influences on bridge shape, stress distribution and prestressing loss were calculated for one common prestressed continuous concrete box girder bridge by MIDAS CIVIL 2006, respectively. The obtained result presents that: the influence on the bridge shape and the prestressing loss are not apparent, but the influence on the stress distribution is serious; the maximal compressive stress of procedure inversion is more 42.3% than common construction procedure only by tensing the remaining steel beams at box girder; especially, the combining area between the box girder and temporary support is easy to pull out. So, the procedure inversion construction method cant be accepted.

Based on the Different Specifications of Jacking Construction of Continuous Girder Bridge Reliability Analysis

2014 ◽  
Vol 584-586 ◽  
pp. 2017-2022
Author(s):  
Jian Kang Shen
Keyword(s):  
Reliability Analysis ◽  
Cross Section ◽  
Prestressed Concrete ◽  
Reliability Index ◽  
Element Model ◽  
Construction Stage ◽  
Calculation Results ◽  
Continuous Girder Bridge ◽  
Bridge Reliability ◽  
Girder Bridge

The purpose of this paper is aimed at according to the "highway reinforced concrete and prestressed concrete bridge and culvert design specifications (JTG D62-2004) and (JTJ 023-85) design of jacking construction of continuous girder bridge for reliability analysis. By establishing a finite element model of construction stage and into a bridge stage respectively the reliability index of the typical cross section is analyzed. Aiming at construction stage, by choosing typical cross section of reliability analysis, draw a cross section of reliability index with the change of construction stage. Calculation results show that, according to JTG D62-2004 specification of reliability index calculation results than based on results of calculating the JTJ 023-85 specification. In this paper, the analysis results can provide reference for pushing the construction of the continuous girder bridge design.

Sign in / Sign up

Export Citation Format

Share Document