Monitoring of Self Compacting Concrete Characteristics Development

2014 ◽  
Vol 1054 ◽  
pp. 128-131
Author(s):  
Klára Křížová ◽  
Petr Novosad ◽  
Denisa Orsáková
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Fresh Concrete ◽  
Raw Material ◽  
Self Compacting Concrete ◽  
Concrete Properties ◽  
New Concepts ◽  
Basic Characteristics ◽  
Characteristics Development

The paper presents obtained results of self-compacting concretes with various compositions with focus on basic characteristics development. Firstly the fresh concrete properties are summed and self-compactness classes are categorised and subsequently the values of compressive strength, static and dynamic modulus of elasticity of hardened concretes are compared. All the stated parameters were monitored during different ages of the concrete and therefore they provide a view of its development in time. With still enlarging scale of concrete types and development of their application it is necessary to monitor common parameters which due to the application of new concepts in raw material compositions and use of higher amounts of additives may notably differ compared to applied orthodox concrete parameters.

Experimental Study of Compression and Carbonation in Concrete Subjected to Freeze-Thaw Environment

2014 ◽  
Vol 887-888 ◽  
pp. 814-818
Author(s):  
Li Xue Wang ◽  
Xiao Ting Shan ◽  
Yu Qing Zhang ◽  
Chun Sheng Li ◽  
Zai Xing Wang ◽  
...  
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Test Method ◽  
Carbonation Depth ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Freeze Thaw ◽  
Concrete Properties

In order to research the changes of concrete properties in freeze-thaw environment, five concrete samples with water-cement ratio respectively equal to 0.60, 0.65, 0.70, 0.75 and 0.80 were tested in freeze-thaw environment according to GB/T50082-2009 concrete rapid freeze-thaw cycles test method. Five samples were carried out 0, 25, 50, 75, 100 times faster freeze-thaw cycles test. With the increasing number of freeze-thaw cycles, the concrete relative dynamic modulus of elasticity loss rises, the compressive strength drops, and the carbonation depth increases. The greater the water-cement ratio of concrete specimens with freeze-thaw cycles, the greater the degree of damage increases.

scholarly journals Diagnosis and Assessment of Deep Pile Cap Foundation of a Tall Building Affected by Internal Expansion Reactions

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 104
Author(s):  
Fernando A. N. Silva ◽  
João M. P. Q. Delgado ◽  
António C. Azevedo ◽  
Tahlaiti Mahfoud ◽  
Abdelhafid Khelidj ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Structural Integrity ◽  
Gas Permeability ◽  
Ettringite Formation ◽  
Dynamic Modulus Of Elasticity ◽  
Pile Cap ◽  
Deterioration Process

Early deterioration of reinforced concrete foundations has been often reported in recent years. This process is usually characterized by an extensive mapping cracking process on concrete surfaces that results from several types of Internal Swelling Reaction (ISR). In this paper, a real case study of a tall reinforced concrete building with a severe deterioration process installed in its deep foundations is discussed. Laboratory tests were performed in concrete drilled cores extracted from a deep pile cap block 19 years after the beginning of construction. Tests to assess the compressive strength, the static and the dynamic modulus of elasticity, the gas permeability, and electron microscopy scanning to find out the primary mechanism responsible for the deterioration observed during in situ inspections. Chemical alterations of materials were observed in concrete cores, mainly due to Delayed Ettringite Formation (DEF), which significantly affected the integrity and durability of the structure. Dynamic modulus of elasticity showed to be a better indicator of damage induced by ISR in concrete than compressive strength. Procedures to strengthen the deteriorated elements using prestressing proved to be an efficient strategy to recover the structural integrity of pile caps deteriorated due to expansions due to ISR.

scholarly journals Effects of ring characteristics on the compressive strength and dynamic modulus of elasticity of seven softwood species

Holzforschung ◽  
2007 ◽  
Vol 61 (4) ◽  
pp. 414-418 ◽  
Author(s):  
Cheng-Jung Lin ◽  
Ming-Jer Tsai ◽  
Chia-Ju Lee ◽  
Song-Yung Wang ◽  
Lang-Dong Lin
Keyword(s):  
Compressive Strength ◽  
Statistical Analysis ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Ring Width ◽  
Ring Density ◽  
Dynamic Modulus Of Elasticity ◽  
Wave Technique ◽  
Wood Strength ◽  
Softwood Species

Abstract The effects of ring characteristics on the compressive strength and dynamic modulus of elasticity of seven softwood species in Taiwan were examined. The results revealed good correlation between compressive strength and dynamic modulus of elasticity obtained using an ultrasonic wave technique (correlation coefficient r=0.77–0.86). Overall, compressive strength increased with decreasing ring width parameters and increasing ring density parameters. Ring density was related to compressive strength, but was not the sole factor affecting the wood strength. According to our statistical analysis, compressive strength was affected by various ring characteristics. Relationships between ring characteristics and compressive strength are influenced by the anatomic direction. Results revealed that earlywood density and minimum density in a ring are equally important variables for evaluating the compressive strength of wood.

scholarly journals Kajian Karakteristik Beton Memadat Sendiri yang Menggunakan Serat Ijuk (Hal. 54-65)

2018 ◽  
Vol 4 (4) ◽  
pp. 54
Author(s):  
Iis Nurjamilah ◽  
Abinhot Sihotang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
High Strength ◽  
Self Compacting Concrete ◽  
Palm Fiber ◽  
Fiber Concrete ◽  
Dilute Mixture

ABSTRAKKajian karakteristik beton memadat sendiri yang menggunakan serat ijuk merupakan sebuah kajian yang dilakukan untuk mengetahui pengaruh penambahan serat ijuk terhadap karakteristik beton memadat sendiri (SCC). Beton memadat sendiri yang menggunakan serat ijuk (PFSCC) didesain memiliki campuran yang encer, bermutu tinggi (= 40 MPa) dan memiliki persentase kekuatan lentur yang lebih baik. PFSCC  didapatkan dari hasil pencampuran antara semen sebanyak 85%, fly ash 15%, superplastizicer 1,5%, serat ijuk 0%, 0,5%; 1%; 1,5%; 2% dan 3% dari berat binder (semen + fly ash), kadar air 190 kg/m3, agregat kasar 552,47 kg/m3 dan pasir 1.063 kg/m3. Semakin banyak persentase penambahan serat ijuk ke dalam campuran berdampak terhadap menurunnya workability beton segar. Penambahan serat ijuk yang paling baik adalah sebanyak 1%, penambahan tersebut dapat meningkatkan kekuatan tekan beton sebesar 13% dan lentur sebesar 1,8%.Kata kunci: beton memadat sendiri (SCC), beton berserat, beton memadat sendiri yang menggunakan serat ijuk (PFSCC), serat ijuk ABSTRACTThe study of characteristics self compacting concrete using palm fibers is a study conducted to determine the effect of adding palm fibers to characteristics of self compacting concrete (SCC). palm fibers self compacting concrete (PFSCC) is designed to have a dilute mixture, high strength (= 40 MPa), and have better precentage flexural strength. PFSCC was obtained from mixing of 85% cement, 15% fly ash, 1.5% superplastizicer, 0%, 0.5%, 1%, 1.5%, 2% and 3% palm fibers from the weight of binder  (cement + fly ash), water content 190 kg/m3, coarse aggregate 552.47 kg/m3 and sand 1,063 kg/m3. The more persentage palm fibers content added to the mixture makes workability of fresh concrete decreases. The best addition of palm fiber is 1%, this addition can increases the compressive strength 13% and flexural strength 1.8%.Keywords: self compacting concrete (SCC), fiber concrete, Palm fiber self compacting concrete (PFSCC), palm fiber

Non-Destructive Testing for Concrete: Dynamic Modulus and Ultrasonic Velocity Measurements

2011 ◽  
Vol 243-249 ◽  
pp. 165-169 ◽  
Author(s):  
Iqbal Khan Mohammad
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Non Destructive Testing ◽  
Destructive Testing ◽  
Dynamic Modulus Of Elasticity ◽  
Non Destructive

Nondestructive testing (NDT) is a technique to determine the integrity of a material, component or structure. The commonly NDT methods used for the concrete are dynamic modulus of elasticity and ultrasonic pulse velocity. The dynamic modulus of elasticity of concrete is related to the structural stiffness and deformation process of concrete structures, and is highly sensitive to the cracking. The velocity of ultrasonic pulses travelling in a solid material depends on the density and elastic properties of that material. Non-destructive testing namely, dynamic modulus of elasticity and ultrasonic pulse velocity was measured for high strength concrete incorporating cementitious composites. Results of dynamic modulus of elasticity and ultrasonic pulse velocity are reported and their relationships with compressive strength are presented. It has been found that NDT is reasonably good and reliable tool to measure the property of concrete which also gives the fair indication of the compressive strength development.

Performance Deterioration of High Strength Concrete under Mixed Erosion and Freeze-Thaw Cycling

2010 ◽  
Vol 163-167 ◽  
pp. 1655-1660
Author(s):  
Jian Zhang ◽  
Bo Diao ◽  
Xiao Ning Zheng ◽  
Yan Dong Li
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Mass Loss ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
High Strength Concrete ◽  
High Strength ◽  
Freeze Thaw ◽  
Strength Concrete ◽  
Dynamic Modulus Of Elasticity

The mechanical properties of high strength concrete(HSC) were experimentally investigated under mixed erosion and freeze-thaw cycling according to ASTM C666(Procedure B), the erosion solution was mixed by weight of 3% sodium chloride and 5% sodium sulfate. The mass loss, relative dynamic modulus of elasticity, compressive strength, elastic modulus and other relative data were measured. The results showed that with the increasing number of freeze-thaw cycles, the surface scaled more seriously; the mass loss, compressive strength and elastic modulus continued to decrease; the relative dynamic modulus of elasticity increased slightly in the first 225 freeze-thaw cycles, then decreased in the following 75 cycles; the corresponding strain to peak stress decreased with the increase of freeze-thaw cycles. After 200 cycles, the rate of deterioration of concrete accelerated obviously.

Assessing of the fresh concrete properties of self-compacting concrete containing sawdust ash

2008 ◽  
Vol 22 (6) ◽  
pp. 1178-1182 ◽  
Author(s):  
Augustine U. Elinwa ◽  
Stephen P. Ejeh ◽  
Ahmed M. Mamuda
Keyword(s):  
Fresh Concrete ◽  
Self Compacting Concrete ◽  
Concrete Properties

scholarly journals Comparative Study of Self-Compacting Concrete Containing Lightweight and Normal Aggregates

2019 ◽  
Vol 27 (2) ◽  
pp. 1-8
Author(s):  
Ramamohanrao Pannem ◽  
Padmaja P. Kumar
Keyword(s):  
Fly Ash ◽  
Fresh Concrete ◽  
Void Content ◽  
Self Compacting Concrete ◽  
Simple Method ◽  
Coarse Aggregates ◽  
Concrete Properties ◽  
Round Shape ◽  
Fine Aggregates ◽  
Ash Aggregates

AbstractBased on the available literature, a simple method was adopted to calculate the packing density of aggregates and thereby reduce their void content by optimising their packing aggregates and by using two different sizes of coarse aggregates and fine aggregates. This study provides an understanding of the way in which the shape of aggregates affects the properties of self-compacting concrete (SCC). The fresh, hardened, and durable properties of SCC with normal and lightweight fly ash coarse aggregates are found at the corresponding age of the curing. Their values were compared with respect to SCC containing normal aggregates. A mix with fly ash aggregates was found to have better fresh concrete properties due to the round shape of the aggregates. After the packing of the aggregates, this mix was found to have better mechanical and durability properties than all the other concrete mixes.

Sign in / Sign up

Export Citation Format

Share Document