Effect of Solid Lipid and Liquid Oil Ratios on Properties of Nanostructured Lipid Carriers for Oral Curcumin Delivery

2014 ◽  
Vol 1060 ◽  
pp. 62-65 ◽  
Author(s):  
Yaowaporn Sangsen ◽  
Punsupang Laochai ◽  
Pravara Chotsathidchai ◽  
Ruedeekorn Wiwattanapatapee
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Sustained Release ◽  
Physicochemical Properties ◽  
Nanostructured Lipid Carriers ◽  
Loading Capacity ◽  
High Shear ◽  
Solid Lipid ◽  
High Shear Homogenization ◽  
Xrd Techniques

In this study, three nanostructured lipid carriers (NLC) formulations comprised of varying ratios of lipid (Compritol® 888 ATO) and oil (Labrafac® CC) including 4:1, 3:2, and 2.5:2.5, were developed by high shear homogenization technique. The effect of different ratios on the physicochemical properties and release profiles of the formulations were investigated. Increasing the amount of liquid oil increased the particle size and zeta potential whereas decreased size distribution of the blank and curcumin loaded NLC. However, the entrapment efficacy and loading capacity of the NLC for curcumin were not increased following such ratios. The different ratios were not influence on the sequence of sustained release of curcumin from the NLC over 60 h. Moreover, the amorphous curcumin and crystalline behavior of the optimized NLC were characterized by DSC and XRD techniques. Thus, the effect of the proportions of solid lipid and liquid oil in the formulations should be considered for development of suitable NLC system for oral curcumin delivery.

scholarly journals Olanzapine Loaded Nanostructured Lipid Carriers via High Shear Homogenization and Ultrasonication

2021 ◽  
Vol 89 (2) ◽  
pp. 25
Author(s):  
Adejumoke Lara Ajiboye ◽  
Uttom Nandi ◽  
Martin Galli ◽  
Vivek Trivedi
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
Particle Diameter ◽  
Phosphate Buffer Solution ◽  
Nanostructured Lipid Carriers ◽  
High Shear ◽  
Buffer Solution ◽  
High Shear Homogenization

The aim of this study was to understand the effect of high shear homogenization (HSH) and ultrasonication (US) on the physicochemical properties of blank and olanzapine loaded nanostructured lipid carriers (NLCs) along with their drug loading potential and drug release profiles from formulated particles. NLCs were prepared with different ratios of Compritol and Miglyol as the solid and liquid lipids, respectively, under changing HSH and US times between 0 to 15 minutes. The surfactants (Poloxamer 188 (P188) and tween 80) and the drug content was kept constant in all formulations. The prepared NLCs were evaluated for particle size, polydispersity index, zeta potential, drug crystallinity and chemical interactions between lipids and OLZ. The in-vitro drug release was performed using dialysis tube method in phosphate buffer solution (PBS) at pH 7.4. The formulated NLCs were negatively charged, spherically shaped and monodisperse, with particle sizes ranging from 112 to 191 nm. There was a significant influence of US time on the preparation of NLCs in comparison to HSH, where a significant reduction in the mean particle diameter was seen after 5 min of sonication. An increase of Miglyol content in NLCs led to an increase in particle size. In general, application of US led to decrease in particle size after HSH but an increase in particle diameter of low Miglyol containing preparation was also observed with longer sonication time. OLZ was successfully encapsulated in the NLCs and a total release of 89% was achieved in 24 hours in PBS at pH 7.4.

scholarly journals INFLUENCE OF FORMULATION FACTORS ON THE SIZE OF NANOSTRUCTURED LIPID CARRIERS AND NANOEMULSIONS PREPARED BY HIGH SHEAR HOMOGENIZATION

2018 ◽  
Vol 10 (4) ◽  
pp. 61 ◽  
Author(s):  
Ahmed R. Gardouh ◽  
Samar H. Faheim ◽  
Ahmed T. Noah ◽  
Mamdouh M. Ghorab
Keyword(s):  
Particle Size ◽  
Tween 80 ◽  
Homogenization Method ◽  
Nanostructured Lipid Carriers ◽  
High Shear ◽  
High Shear Homogenization ◽  
Formulation Factors ◽  
Concentration Ratios

Objective: The main purpose of this work was to elucidate the effect of certain formulation factors on the size of nanostructured lipid carriers (NLCs) and nanoemulsions (NEs) by using high shear homogenization method.Methods: NLCs and NEs were prepared by high shear homogenization method using different liquid lipids types such as (Dermarol DCO® and Dermarol CCT®) at different concentrations. The effect of different concentration ratios of Tween 80 to Span 20 (2.5/1, 5/1, 10/1, 15/1) w/w % and different homogenization speeds (12 000, 18 000 rpm) on the resulted particle size were also studied.Results: The results revealed that the optimum NLCs and NEs resulted when we use Dermarol CCT® with a concentration of 90 % as liquid lipid and decreasing surfactant ratio to (2.5/1) w/w % with increasing the homogenization speed to 18 000 rpm. Conclusion: NLCs and NEs were successfully prepared, and from this study, it can be concluded that NLCs have the optimum particle size than Nanoemulsions.

scholarly journals EXPERIMENTAL DEVELOPMENT AND MOLECULAR DOCKING: NANOSTRUCTURED LIPID CARRIERS (NLCs) OF COENZYME Q10 USING STEARIC ACID AND DIFFERENT LIQUID LIPIDS AS LIPID MATRIX

2021 ◽  
pp. 108-116
Author(s):  
NI LUH DEWI ARYANI ◽  
SISWANDONO ◽  
WIDJI SOERATRI ◽  
FANNY PUTRI RAHMASARI ◽  
DIAN RIZKI KARTIKA SARI
Keyword(s):  
Particle Size ◽  
Molecular Docking ◽  
Zeta Potential ◽  
Stearic Acid ◽  
Coenzyme Q10 ◽  
In Silico ◽  
Nanostructured Lipid Carriers ◽  
Experimental Development ◽  
Solid Lipid ◽  
In Silico Studies

Objective: To develop coenzyme Q10 (co-Q10) nanostructured lipid carriers (NLCs) using stearic acid (SA) and various liquid lipids with different lipophilicity as well as highlights the use of in silico studies for predicting and elucidating the interaction of drug-lipid used as carries in NLCs, at the molecular level. Methods: The co-Q10 NLCs were prepared using SA as solid lipid and oleic acid (OA), isopropyl myristate (IPM), as well as isopropyl palmitate (IPP) as liquid lipids by the high shear homogenization method. Firstly, the formulas were optimized by the appropriate required HLB (rHLB). The optimized NLCs were characterized in the particle size, distribution of particle size, zeta potential, crystallinity behavior, Fourier transform infrared (FT-IR) spectra, morphology, entrapment efficiency (EE), drug loading (DL), and pH value. The interaction of drug-lipids in silico was studied using the AutoDock Vina program. Results: The co-Q10 NLCs using SA and the various liquid lipid possessed the mean particle size, polydispersity index (PDI), zeta potential, EE, DL, and pH values were 180 to 350 nm,<0.5,<-30 mV, 83 to 88%, 10 to 11%, and 5.0 to 5.6, respectively. The EE and DL of co-Q10 NLCs increased with decreasing in binding energy (∆G) in silico. Conclusion: The co-Q10 NLCs using SA as solid lipid and OA, IPM, as well as IPP as liquid lipids were developed successfully. Furthermore, in silico study by molecular docking is a potential approach in predicting and elucidating the interaction of drug-lipid in the development of NLCs formulation.

scholarly journals Development of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers of Loteprednol Etabonate: Physicochemical Characterization and Ex Vivo Permeation Studies

2021 ◽  
Author(s):  
Burcu Üner ◽  
Samet Özdemir ◽  
Çetin Taş ◽  
Yıldız Özsoy ◽  
Melike Üner
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Fickian Diffusion ◽  
Control Group ◽  
Loteprednol Etabonate ◽  
Solid Lipid

Abstract Purpose Loteprednol etabonate (LE) is a new generation corticosteroid that is used for the treatment of inflammatory and allergic conditions of the eye, and management of seasonal allergic rhinitis nasally. LE which is a poorly soluble drug with insufficient bioavailability, has a high binding affinity to steroid receptors. Sophisticated colloidal drug delivery systems of LE could present an alternative for treatment of inflammatory and allergic conditions of the skin. For this purpose, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were attempted to improve for transdermal LE delivery for the first time. Methods SLN and NLC were produced by hot homogenization and ultrasonication technique. Formulations were characterized by dynamic light scattering, scanning electron microscopy, fourier transform infrared spectroscopy and differential scanning calorimetry. Their physical stability was monitored for 3 months of storage. Drug release profiles and permeation properties of SLN and NLC through the porcine skin were investigated. Results It was determined that SLN and NLC below 150 nm particle size had a homogeneous particle size distribution as well as high drug loading capacities. They were found to be stable both physically and chemically at room temperature for 90 days. In terms of release kinetics, it was determined that they released from SLN and NLC in accordance with Fickian diffusion release. Formulations prepared in this study were seen to significantly increase drug penetration through pig skin compared to the control group (p ≤ 0.05). Conclusion SLN and NLC formulations of LE can be stated among the systems that can be an alternative to conventional systems with less side-effect profile in the treatment of inflammatory problems on the skin.

scholarly journals Ex-vivo Ex-Vivo Absorption Study of a Novel Dabigatran Etexilate Loaded Nanostructured Lipid Carrier Using Non-Everted Intestinal Sac Model

2019 ◽  
Vol 28 (2) ◽  
pp. 37-45
Author(s):  
Haithem N Abed ◽  
Ahmed A. Hussein
Keyword(s):  
Particle Size ◽  
Oleic Acid ◽  
Zeta Potential ◽  
Oral Absorption ◽  
Ex Vivo ◽  
Dabigatran Etexilate ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carrier ◽  
Loading Capacity ◽  
Intestinal Permeation

Abstract The purpose of our study was to develop Dabigatran Etexilate loaded nanostructured lipid carriers (DE-NLCs) using Glyceryl monostearate and Oleic acid as lipid matrix, and to estimate the potential of the developed delivery system to improve oral absorption of low bioavailability drug, different Oleic acid ratios effect on particle size, zeta potential, entrapment efficiency and loading capacity were studied, the optimized DE-NLCs shows a particle size within the nanorange, the zeta potential (ZP) was 33.81±0.73mV with drug entrapment efficiency (EE%) of  92.42±2.31% and a loading capacity (DL%) of 7.69±0.17%. about 92% of drug was released in 24hr in a controlled manner, the ex-vivo intestinal permeation study using the non-everted sac model shows four folds increment in the permeation of DE-NLCs compared to dabigatran etexilate suspension (DE-S).

scholarly journals FORMULATION AND EVALUATION OF DASATINIB LOADED SOLID LIPID NANOPARTICLES

2018 ◽  
Vol 10 (12) ◽  
pp. 14 ◽  
Author(s):  
M. Yasmin Begum ◽  
Prathyusha Reddy Gudipati
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Size Analysis ◽  
Compatibility Study ◽  
Solid Lipid ◽  
Poly Dispersity Index

Objective: The aim of present work was to formulate and evaluate Dasatinib (DST) loaded solid lipid nanoparticles (SLNs) as a potential anticancer drug delivery system by enhancing its solubility.Methods: SLNs consist of a solid lipid matrix where the drug was incorporated. Surfactants of GRAS grade were used to avoid aggregation and to stabilize the SLNs. DST-SLNs formulations of varying concentrations were prepared by high speed homogenization technique and evaluated for drug excipients compatibility study, poly-dispersity index, particle size analysis, surface morphology, zeta potential and drug release features.Results: It was observed that DST-SLNs with optimum quantities of poloxomer: lecithin ratio showed 88.06% drug release in 6h with good entrapment efficiency of 76.9±0.84 %. Particle size, Poly dispersity index, zeta potential and drug entrapment efficiency for the optimized formulation was found to be optimum. Stability studies revealed that the entrapment efficiency of the SLN dispersion stored in 4 °C was stable.Conclusion: Thus, it can be concluded that formulations of DST loaded SLNs are suitable carriers for improving the solubility and dissolution related problems. 

scholarly journals BIODEGRADABLE POLYMER: A NOVEL PHARMACEUTICAL CARRIER FOR SUSTAINED RELEASE OF METRONIDAZOLE

2017 ◽  
Vol 10 (10) ◽  
pp. 136
Author(s):  
Gayathri Hariharan ◽  
Priyanka Sinha
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Biodegradable Polymer ◽  
Drug Loading ◽  
Cross Linking ◽  
Loading Capacity ◽  
Flow Properties ◽  
Chitosan Microspheres

Objective: To optimize and evaluate the formulation of metronidazole (MT)-loaded chitosan microspheres and to investigate the efficiency of biodegradable polymer in developing sustained release formulation of MT to prolong the action of drug.Methods: MT microspheres were prepared using emulsion cross-linking method. Polymer-drug compatibility study was done using Fourier transform infrared. Physical characteristics were evaluated by particle size,SEM, flow properties etc. In vitro studies for evaluating drug release for MT-loaded chitosan microspheres were done by dissolution study.Results: Particle size of the formulated microspheres was found to be within the range of 110-130 μm. Flow properties of F1-F7 such as angle of repose, bulk density, and tapped density were found to be within limits. Drug entrapment efficiency was found to be better for all the formulations within the range of 74.82-84.32% w/w. Drug loading capacity was found to be in the range of 56-83.2% w/v. In vitro drug release was found to be in the range of 81.32-96.23% w/v.Conclusion: In spite of all the above results, we conclude that F5 formulation was optimized depending on the data obtained from the drug loading capacity and percentage drug release studies. F5 formulation is formulated with drug-polymer ratio 1:2 with 1% of di octyl sodium sulfo succinate and 8 ml of glutaraldehyde as a cross-linking agent.

scholarly journals Atorvastatin Solid Lipid Nanoparticles as a Promising Approach for Dermal Delivery and an Anti-inflammatory Agent

2020 ◽  
Vol 21 (7) ◽  
Author(s):  
Seyed Sadegh Shahraeini ◽  
Jafar Akbari ◽  
Majid Saeedi ◽  
Katayoun Morteza-Semnani ◽  
Shidrokh Abootorabi ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Inflammatory Agent ◽  
Drug Entrapment Efficiency ◽  
Anti Inflammatory ◽  
Dermal Delivery

Abstract In the current research, the main focus was to overcome dermal delivery problems of atorvastatin. To this end, atorvastatin solid lipid nanoparticles (ATR-SLNs) were prepared by ultra-sonication technique. The prepared SLNs had a PDI value of ≤ 0.5, and the particle size of nanoparticles was in the range 71.07 ± 1.72 to 202.07 ± 8.40 nm. It was noticed that, when the concentration of lipid in ATR-SLNs increased, the size of nanoparticles and drug entrapment efficiency were also increased. Results showed that a reduction in the HLB of surfactants used in the preparation of SLN caused an increase in the particle size, zeta potential (better stability), and drug entrapment efficiency. Despite Tween and Span are non-ionic surfactants, SLNs containing these surfactants showed a negative zeta potential, and the absolute zeta potential increased when the concentration of Span 80 was at maximum. DSC thermograms, FTIR spectra, and x-ray diffraction (PXRD) pattern showed good incorporation of ATR in the nanoparticles without any chemical interaction. In vitro skin permeation results showed that SLN containing atorvastatin was capable of enhancing the dermal delivery of atorvastatin where a higher concentration of atorvastatin can be detected in skin layers. This is a hopeful promise which could be developed for clinical studies of the dermal delivery of atorvastatin nanoparticles as an anti-inflammatory agent.

scholarly journals PREPARATION, CHARACTERIZATION, AND FORMULATION OF SOLID LIPID NANOPARTICLES LOTION FROM MULBERRY ROOTS (MORUS ALBA L.)

2020 ◽  
pp. 182-186
Author(s):  
MUHAMAD WILDAN NUGRAHA ◽  
RADITYA ISWANDANA ◽  
MAHDI JUFRI
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
High Speed ◽  
Tween 80 ◽  
Lipid Nanoparticles ◽  
Morus Alba ◽  
Glyceryl Monostearate ◽  
Optimum Result ◽  
Solid Lipid

Objective: Tween 80 has been used as a solvent for the extraction of phenolic compounds because this surfactant has both hydrophilic and hydrophobicproperties. Solid lipid nanoparticles (SLNs) have been developed to improve penetration through the skin layer. We investigated the efficacy of usingthe microwave-assisted micellar extraction (MAME) approach for extracting oxyresveratrol from Morus alba roots and also to develop an SLN lotion.Methods: The M. alba roots were extracted with Tween 80 in a microwave for 18 min, and the extract was used to develop SLN with differentconcentrations of glyceryl monostearate. The SLNs from M. alba root extracts were prepared by a high-speed homogenization technique (25,000 rpmfor 15 min). The SLNs produced were characterized as per particle size, polydispersity index (PDI), and zeta potential. The SLNs with the bestcharacteristics were used to formulate a lotion using a high-pressure homogenizer.Results: Extraction using MAME showed improved extraction efficiency. The oxyresveratrol concentration from the extract was 2.77%. The SLN with2.5% glyceryl monostearate showed the optimum result, with a particle size of 130.20 nm, a PDI of 0.278, and a zeta potential of −21.8 mV. The SLNlotion exhibited a particle size of 285.9 nm and a PDI of 0.360. The SLN lotion also had good penetration, with a flux of 4.70 μg cm−2/h.Conclusion: MAME is an efficient method for extracting oxyresveratrol from M. alba roots. The SLN with 2.5% glyceryl monostearate exhibited theoptimum characteristics, and the SLN lotion showed good characteristics, including skin penetration.

scholarly journals Preparation and Characterization of Solid Lipid Nanoparticles Loaded with Cisplatin

2018 ◽  
Vol 8 (6) ◽  
pp. 125-131
Author(s):  
Indrayani D. Raut ◽  
Rajendra C. Doijad ◽  
Shrinivas K. Mohite ◽  
Arehalli S. Manjappa
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Acquired Resistance ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Platinum Drug ◽  
Solid Lipid

Cisplatin (Cis diaminedichloro platinum) was the first platinum drug to be used as an anticancer drug, and it is widely used in the treatment of testicular, head, neck, ovarian and lung cancer. The use of Cisplatin is limited due to its intrinsic and acquired resistance and severe side effects such as chronic neurotoxicity and nephrotoxicity. The colloidal carriers such as emulsion, liposomes, polymeric nanoparticles have been extensively studied to overcome above limitations. The solid lipid nanoparticles (SLNs), amongst other colloidal carriers, were found to be an ideal carrier for lipophillic drug for better stability and release retardation. Cisplatin loaded solid lipid nanoparticles was prepared by microemulsion technique. Stearic acid was used as lipid. The other excipients were used as DPPG, Soya lecithin and Poloxamer P407  and acidic buffer  PH4. Also used Probe sonication for 10 min at 79 Amplitude. Cisplatin SLNs Batch C13 showed particle size of 119.23±1.52 nm, Zeta potential of -37.33±2.47 mV, % Entrapment efficiency of  90.2 ± 2.1 %., % Drug loading capacity of 1.62 ± 1.34 %., The TEM study of optimized Cisplatin SLN illustrated the spherical shape of nanoparticles. Total release amount of Cisplatin was 82.62± 2.04 % after 48 hrs. The formulation performed kinetics study followed Peppas plot equation The SLNs of Cisplatin met all the requirements of a colloidal drug delivery system. They had particle size in nanosize; their size distribution was narrow and all the particles were in spherical shape and stable. Keywords: Cisplatin, Solid Lipid nanoparticles, zeta potential, Particle size, Transmission electron Microscopy.

Sign in / Sign up

Export Citation Format

Share Document