Investigated Effect of Points Charge of the Receptors on the Conduction of Semiconductor Nanowire

2015 ◽  
Vol 1109 ◽  
pp. 167-170
Author(s):  
M. Wesam Al-Mufti ◽  
U. Hashim ◽  
Mijanur Rahman ◽  
Tijjani Adam ◽  
A.H. Azman ◽  
...  
Keyword(s):  
Finite Element ◽  
Oxide Layer ◽  
Point Charge ◽  
Potential Distribution ◽  
Silicon Nanowire ◽  
Comsol Multiphysics ◽  
Functional Layer ◽  
Semiconductor Nanowire ◽  
Finite Element Calculations

The paper reported a study on an effect of the point charge of the bio-interface of a nanowire field biosensor on the conductance of the nanowire, through finite element calculations using COMSOL Multiphysics. A model with 5 layers starting with silicon nanowire of radius 10nm surrounded by a 2-nm oxide layer, and the oxide layer were surrounded by a 5 nm thick functional layer and 2 points charge were considered for this study and last layer is for electrolyte. The results shows that is different voltages with points change is that effected on the conductance of nanowire that is clear from different of potential distribution of point charge.

The Field Effect of Concentration DNA on Conductance of Silicon Nanowire

2015 ◽  
Vol 1109 ◽  
pp. 163-166
Author(s):  
M. Wesam Al-Mufti ◽  
U. Hashim ◽  
Mijanur Rahman ◽  
Tijjani Adam ◽  
A.S. Ibraheam ◽  
...  
Keyword(s):  
Finite Element ◽  
Surface Modification ◽  
Field Effect ◽  
Silicon Nanowire ◽  
Semiconductor Nanowires ◽  
Comsol Multiphysics ◽  
Dna Concentration ◽  
Finite Element Calculations ◽  
Potential Use

Currently, the potential use of Semiconductor nanowires as parts of future devices has triggered an increased interest in biosensor research. The COMSOL Multiphysics is simulation used that can improve the sensitivity of Bioelectronics to extend their stability and utility. In this paper, we are investigating the effect of DNA concentration of the electrolyte effect biosensor on the conductance of the nanowire through finite element calculations. First, the distribution of the electrostatic has potential in the nanowire due to the DNA concentration. In conclusion of this paper represented DNA that conductance nanowire is affected from surface modification after DNA including on the model.

scholarly journals Modeling Electric Field and Potential Distribution of an Model of Insulator in Two Dimensions by the Finite Element Method

2018 ◽  
Vol 3 (1) ◽  
pp. 01
Author(s):  
Nassima M ziou ◽  
Hani Benguesmia ◽  
Hilal Rahali
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Electric Field ◽  
Potential Distribution ◽  
Two Dimensions ◽  
Comsol Multiphysics ◽  
The Finite Element Method ◽  
Good Agreement ◽  
Element Method

The electrical effects can be written by two magnitudes the field and the electrostatic potential, for the determination of the distribution of the field and the electric potential along the leakage distance of the polluted insulator, the comsol multiphysics software based on the finite element method will be used. The objective of this paper is the modeling electric field and potential distribution in Two Dimensions by the Finite Element Method on a model of insulator simulating the 1512L outdoor insulator used by the Algerian company of electricity and gas (SONELGAZ). This model is under different conductivity, applied voltage, position of clean layer and width of clean layer. The computer simulations are carried out by using the COMSOL multiphysics software. This paper describes how Comsol Multiphysics have been used for modeling of the insulator using electrostatic 2D simulations in the AC/DC module. Numerical results showed a good agreement.

An Investigation of the Distribution of Electric Potential and Space Charge in a Silicon Nanowire

2014 ◽  
Vol 69 (10-11) ◽  
pp. 597-605 ◽  
Author(s):  
A. Wesam Al-Mufti ◽  
Uda Hashim ◽  
Md. Mijanur Rahman ◽  
Tijjani Adam
Keyword(s):  
Finite Element Method ◽  
Space Charge ◽  
Electric Potential ◽  
Silicon Nanowire ◽  
Electrical Potential ◽  
Comsol Multiphysics ◽  
The Finite Element Method ◽  
Simulation Experiments ◽  
Different Dimensions

AbstractThe distribution of electric potential and space charge in a silicon nanowire has been investigated. First, a model of the nanowire is generated taking into consideration the geometry and physics of the nanowire. The physics of the nanowire was modelled by a set of partial differential equations (PDEs) which were solved using the finite element method (FEM). Comprehensive simulation experiments were performed on the model in order to compute the distribution of potential and space charge. We also determined, through simulation, how the characteristic of the nanowire is affected by its dimensions. The characterization of the resulting nanowire, calculated by COMSOL Multiphysics, shows different dimensions and their effect on space charge and electrical potential

Exact analysis of the bending of wide beams by a modified elastica approach

2011 ◽  
Vol 225 (11) ◽  
pp. 2759-2764 ◽  
Author(s):  
L F Campanile ◽  
R Jähne ◽  
A Hasse
Keyword(s):  
Finite Element ◽  
Substantial Reduction ◽  
Short Review ◽  
Computational Effort ◽  
Two Dimensional ◽  
Finite Element Calculations ◽  
Dimensional Finite Element ◽  
Wide Beams ◽  
Insight Into ◽  
Selection Of

Classical beam models do not account for partial restraint of anticlastic bending and are therefore inherently inaccurate. This article proposes a modification of the exact Bernoulli–Euler equation which allows for an exact prediction of the beam's deflection without the need of two-dimensional finite element calculations. This approach offers a substantial reduction in the computational effort, especially when coupled with a fast-solving schema like the circle-arc method. Besides the description of the new method and its validation, this article offers an insight into the somewhat disregarded topic of anticlastic bending by a short review of the published theories and a selection of representative numerical results.

Incompressibility and mesh sensitivity analysis in finite element simulation of rubbers

2016 ◽  
Vol 7 (1) ◽  
pp. 7-12 ◽  
Author(s):  
D. Huri
Keyword(s):  
Finite Element ◽  
Material Characterization ◽  
Numerical Stability ◽  
Material Parameters ◽  
Linear Finite Element ◽  
Element Simulation ◽  
Finite Element Calculations ◽  
Mesh Density ◽  
Rubber Component

Non-linear finite element calculations are indispensable when important information of the material response under load of a rubber component is desired. Although the material characterization of a rubber component is a demanding engineering task, the changing contact range between the parts and the incompressibility behaviour of the rubber further increase the complexity of the investigations. In this paper the effects of the choice of the numerical material parameters (e.g. bulk modulus) are examined with regard to numerical stability, mesh density and calculation accuracy. As an example, a rubber spring is chosen where contact problem is also handled.

Sign in / Sign up

Export Citation Format

Share Document