Fabrication of Organic and Inorganic-Based Nanowires: An Overview

2015 ◽  
Vol 1113 ◽  
pp. 50-55
Author(s):  
Muhammad Izzuddin Mohamed Jaafar ◽  
Md Amin Hashim
Keyword(s):  
Electrodeposition Technique ◽  
The Real ◽  
Real Application ◽  
Solution Processes ◽  
Inorganic Nanowires

The real application of nanofabrication is in the nanoindustries due to their existence in nanodimensions. In this paper, it is attempted to review on the fabrication techniques of organic and inorganic nanowires, which includes vapour and solution processes. The two commonly approached methods, with respect to solution processes are fabrication through template-assisted electrodeposition technique, and the vapour-liquid-solid (VLS) as compared to organic nanowires which are fabricated through vapour and solution processes.

scholarly journals I. On a new method of approximation applicable to elliptic and ultra-elliptic functions

1860 ◽  
Vol 10 ◽  
pp. 473-475
Keyword(s):  
Geometric Mean ◽  
Elliptic Functions ◽  
New Method ◽  
Square Root ◽  
The Real ◽  
Rate Of Approximation ◽  
Real Application ◽  
Harmonic Means

I found my method on the known principle, that the geometric mean between two quantities is also a geometric mean between the arithmetic and harmonic means of those quantities. We may therefore approximate to the geometric mean of two quantities in this way:—Take their arithmetic and harmonic means; then take the arithmetic and harmonic means of those means; then of these last means again, and so on, as far as we please. If the ratio of the original quantities lies within the ratio of 1 : 2, the approximation proceeds with extraordinary rapidity, so that, in obtaining a fraction nearly equal to √2 by this method, we obtain a result true to eleven places of decimals at the fourth mean. I name this merely to show the rate of approximation. The real application of the method is to the integration of functions embracing a radical of the square root.

The Establishment of a Flexible PdM System for Industry Detection

2012 ◽  
Vol 263-266 ◽  
pp. 457-461 ◽  
Author(s):  
Yan Chun Xia
Keyword(s):  
Predictive Maintenance ◽  
System Framework ◽  
The Real ◽  
Real Application ◽  
System Establishment

The universal predictive maintenance(PdM) system framework integrated several common and important technologies is established in the paper. It is very important to choose and design the relative technologies for the PdM system in the real application at different factories. Here the reasons and method of the system establishment are explained. The functions and structures of the system are analyzed. The establishment of the database of the system is proposed. The PdM system can be realized flexibly based on the real conditions in the real industry application.

scholarly journals Wawasan Nusantara sebagai satu kesatuan, Politik, Ekonomi, Sosial, Budaya dan Hankam

2021 ◽  
Author(s):  
Ramadhan Yusuf Firdhaus
Keyword(s):  
Cultural Patterns ◽  
The Real ◽  
Real Application ◽  
Political Unity

Indonesia is a country that has a variety of diversity in it. For example, seen from the tribe, this country consists of various tribes such as SundaNese Java, Dayak, Bugis, and so on. From each tribe has a variety of cultures that enrich the original cultural patterns of Indonesia. All of this diversity requires unity. How to realize the insight of the archipelago as a political unity, social and cultural unity, economic unity, and hankam unity. The real application of nusantara insight can be done through thinking, behaving, even speaking. Thus, nusantara insight can also be interpreted as the Indonesian nation's view of themselves and their environment based on their national ideas based on Pancasila and the 1945 Constitution, which is the aspiration of an independent, sovereign, dignified nation and animates its lifestyle and wisdom in achieving national goals.

scholarly journals Analysis of rope based mechanism for movement of telescopic conveyor segments

2021 ◽  
Vol 1208 (1) ◽  
pp. 012007
Author(s):  
Fuad Hadžikadunić
Keyword(s):  
Cross Section ◽  
Experimental Test ◽  
Driving System ◽  
The Real ◽  
Real Application ◽  
Full Sense ◽  
The Subject

Abstract The subject of analysis in this paper are rope based mechanisms for the movement of the telescopic conveyors substructure. Experimental test of ropes in conjunction with pulleys on 2 telescopic conveyors were performed in order to assess the real cause of damage and cracking of ropes in a full sense, which occurred in the real application of the conveyor at the site. These are examples of two conveyors with the same characteristics on which combinations of ropes with characteristics of construction of cross section 7x19 and construction of cross section 19x7 are placed, as well as combinations of pulleys with two kinds of grooves. Some specific tests are performed that showed the best combination of construction driving system elements.

Genetic Algorithm Based on Permutation Distance for Laser Antimissile Problem

2010 ◽  
Vol 40-41 ◽  
pp. 488-493
Author(s):  
Yong Sun ◽  
Mao Rui Zhang ◽  
Wei Wei Liu ◽  
Li Na Zhang ◽  
He Li
Keyword(s):  
Genetic Algorithm ◽  
Optimal Solution ◽  
Global Optimal Solution ◽  
The Real ◽  
Real Application ◽  
Global Optimal ◽  
Simulation Results

The genetic algorithm based on permutation distance definition is used to solve the laser antimissile system. When faced with multiple attacking targets, it is clearly important for the laser antimissile system to determine the sequence of the attacking targets to be intercepted so that the maximum attacking targets are destroyed. It’s very difficult to find the global optimal solution, especially when the number of the targets is greater than six. The permutation distance definition is introduced to measure the distribution of the population. The successive zeros permutation distance is to stop the genetic algorithm iterations. Finally, taking ten targets as an example, the simulation results show that the convergence of the algorithm is fast and this achievement can be used in the real application.

Development of the Data Driven 3D Standard Part Library Based on Pro/E

2013 ◽  
Vol 756-759 ◽  
pp. 2422-2427
Author(s):  
Jiang Du ◽  
Yan Cao
Keyword(s):  
Data Driven ◽  
Automatic Modeling ◽  
Key Technology ◽  
The Real ◽  
Real Application ◽  
Standard Part ◽  
Standard Part Library

Aiming at the problems such as updating difficulty, searching slowly and calling inconveniently occurs in use of current 3D Standard Part Library, the method to classify Standard Part data by function and the corresponding operations of each type of classified Standard Part data are analyzed firstly based on the real application and management requirements of the 3D Standard Parts Data. Then, the conception and the architecture of the data driven 3D Standard Part library is discussed based on the goal such as quick retrieve, automatic modeling and dynamical update of the Standard Part data and the methods as well as the key technology to develop the data driven 3D Standard Part Library are discussed based on the Pro/E and Access.

A flexible method combining camera calibration and hand–eye calibration

Robotica ◽  
2013 ◽  
Vol 31 (5) ◽  
pp. 747-756 ◽  
Author(s):  
Zijian Zhao ◽  
Ying Weng
Keyword(s):  
Nonlinear Optimization ◽  
Camera Calibration ◽  
Robot Hand ◽  
Robot Assisted ◽  
Robot System ◽  
System Calibration ◽  
The Real ◽  
Real Application ◽  
Camera Parameters ◽  
Surgical System

SUMMARYWe consider the conventional techniques of vision robot system calibration where camera parameters and robot hand–eye parameters are computed separately, i.e., first performing camera calibration and then carrying out hand–eye calibration based on the calibrated parameters of cameras. In this paper we propose a joint algorithm that combines the camera calibration and the hand–eye calibration together. The proposed algorithm gives the solutions of the cameras' parameters and the hand–eye parameters simultaneously by using nonlinear optimization. Both simulations and real experiments show the superiority of our algorithm. We also apply our algorithm in the real application of the robot-assisted surgical system, and very good results have been obtained.

scholarly journals PEMBERDAYAAN MASYARAKAT MELALUI PENYEDIAAN FASILITAS UMBER AIR, DAN BAK SILASE-BOKASHI-AMONIASE DALAM MENDUKUNG PETERENAKAN BERBASIS PARIWISATA DI DESA NGGORANG, MANGGARAI BARAT

2020 ◽  
Vol 4 (4) ◽  
Author(s):  
Annytha - Detha
Keyword(s):  
Water Storage ◽  
Animal Husbandry ◽  
Adoption Rate ◽  
The Real ◽  
Real Application ◽  
Concrete Application ◽  
Farmer Groups

The success of animal husbandry extension activities can be realized concretely by being conduced in a sustainable manner. Realizing the importance of concrete application, it is necessary to provide supporting facilities that can drive the real application of the training carried out, both training for making Amoniase, Bokashi and Amoniase. Based on the mentoring activities carried out, partners or the community of Nggorang Village have built supporting facilities for animal husbandry independently, namely Clamp Cages, Water Storage Tubs, Ammonia Making Tubs, Bokashi Making Tubs, and Silage Making Basins. Pilot activities to increase the adoption rate of farmer groups in creating grazing areas integrated based on agro-tourism.

scholarly journals Calibrating Sensors to Measure Braking Chopper Currents in DC Traction Units

2020 ◽  
Author(s):  
Helko van den Brom ◽  
Ronald van Leeuwen
Keyword(s):  
Pulse Repetition ◽  
High Current ◽  
The Real ◽  
Preliminary Results ◽  
Real Application ◽  
Reference Transducer ◽  
Railway Traction ◽  
Dc Current ◽  
Better Than

A large part of the energy involved in the braking stage of conventional DC railway traction units is dissipated in rheostat resistors, which is controlled by means of a braking chopper. A setup was developed to calibrate transducers used to measure the resulting high-current chopped DC current signals under conditions mimicking the real application. Preliminary results indicate that the reference transducer used in this setup can accurately measure chopped signals with magnitudes up to at least 250 A and pulse repetition rates up to 500 Hz with uncertainties better than 0.01 %.

Sign in / Sign up

Export Citation Format

Share Document