A Study of Springback of Sheet Metal Formed Parts Using ANSYS

2011 ◽  
Vol 291-294 ◽  
pp. 381-384
Author(s):  
Xuan Zhi Wang ◽  
Syed H. Masood ◽  
Daron Ng ◽  
Omar Dawwas
Keyword(s):  
Sheet Metal ◽  
Metal Forming ◽  
High Strength Steels ◽  
High Strength ◽  
Analysis Software ◽  
Element Analysis ◽  
Advanced High Strength Steels ◽  
Material Recovery ◽  
Formed Product ◽  
Forming Tools

Springback is one of main reason for inaccuracy of sheet metal formed product. Therefore prediction of springback is very important for production of precise products. Springback is an elastic material recovery after unloading of the forming tools, and causes variations and inconsistencies of final part dimensions. This is affected by various parameters involved in the process of sheet metal forming. The main aim of this paper is to investigate the springback of finished part by analysing and controlling the effects of the control parameters on the springback of advanced high strength steels (AHSS). This is done by modelling a deep-drawing process and analysing the results as determined on ANSYS finite element analysis software.

An Investigation of Springback in U-Channel Sheet Metal by Finite Element Analysis

2012 ◽  
Vol 548 ◽  
pp. 456-460 ◽  
Author(s):  
Gopi Alagappan ◽  
Syed H. Masood ◽  
Xuan Zhi Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
High Strength Steels ◽  
High Strength ◽  
Element Analysis ◽  
Advanced High Strength Steels ◽  
Forming Tools

In sheet metal forming, springback is defined as an elastic material recovery after unloading of the forming tools. Springback causes variations and inconsistencies of final part dimensions. Therefore prediction of springback is very important for production of precise products used in automobile and aerospace industries. There are various parameters involved in the process of sheet metal forming, including Young’s modulus, coefficient of friction, Poisson’s ratio, blank thickness, blank length, die radius, punch radius and blank holder force. The aim of this paper is to investigate the springback of a U-channel part by finite element analysis (FEA) and to identify the influences of important parameters on the springback of advanced high strength steels (AHSS) using numerical simulation.

Experimental Study on Galling Behavior of Advanced High Strength Steel in Sheet Metal Forming

2012 ◽  
Vol 502 ◽  
pp. 36-40
Author(s):  
Ying Ke Hou ◽  
Shu Hui Li ◽  
Yi Xi Zhao ◽  
Zhong Qi Yu
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Sheet Material ◽  
High Strength Steels ◽  
High Strength ◽  
Forming Process ◽  
Advanced High Strength Steels ◽  
Sheet Materials ◽  
Materials Used

Galling is a known failure mechanism in many sheet metal forming processes. It limits the lifetime of tools and the quality of the products is affected. In this study, U-channel stamping experiments are performed to investigate the galling behavior of the advanced high strength steels in sheet metal forming . The sheet materials used in the tests are DP590 and DP780. In addition to the DP steels, the mild steel B170P1 is tested as a reference material in this study. Experimental results indicate that galling problem becomes severe in the forming process and the galling tendency can be divided into three different stages. The results also show that sheet material and tool hardness have crucial effects on galling performance in the forming of advanced high strength steels. In this study, DP780 results in the most heaviest galling among the three types of sheet materials. Galling performance are improved with increased hardness of the forming tool.

Evaluation and Validation of Methods to Determine Limit Strain States with Focus on Modeling Ductile Fracture

2014 ◽  
Vol 622-623 ◽  
pp. 265-272
Author(s):  
Andreas Sabathil ◽  
Ingo Heinle ◽  
A. Lipp ◽  
J. Meinhardt ◽  
M. Merklein
Keyword(s):  
Ductile Fracture ◽  
Sheet Metal ◽  
High Strength Steels ◽  
High Strength ◽  
Limit Strain ◽  
Model Parameters ◽  
Element Analysis ◽  
Advanced High Strength Steels ◽  
Validation Experiment ◽  
Body In White

In the manufacturing process of body in white components made from sheet metal it is state of the art to accompany the process by means of finite element analysis. A main criterion for determining a feasible tool design and production process parameters is the prediction of material failure, which can be categorized in instability and ductile fracture. The ductile fracture failure mode is more likely to occur, as more advanced high strength steels and aluminum alloys are used for body in white components. Therefore different approaches have been presented to model ductile fracture over the past years. This task is more challenging when the material is exposed to arbitrary loading paths that can occur in deep drawing processes. However there is no guideline for sheet metal forming applications to determine which models for predicting ductile fracture are suitable, which experiments are necessary and how calibration of model parameters and validation of model prediction can be performed. Additionally there is no standard established that prescribes the evaluation of limit strain states from experiments. Suitable limit strain states are a basic requirement for prediction of ductile fracture as they are used for calibration of fracture models. In this paper, two methods for evaluation of limit strains are discussed and applied to tensile specimens with circular hole and circular cut outs made from aluminum alloy AlSi0.6Mg0.5. One validation experiment is used to investigate failure prediction that is based on limit strain states from different evaluation methods.

An Enhanced Hybrid Springback Compensation Approach: Springback Path – Displacement Adjustment Method For Complex Shaped Products of Sheet Metal Forming

2021 ◽  
Author(s):  
Zhihui Gong ◽  
Mandeep Singh ◽  
Bohao Fang ◽  
Dongbin Wei
Keyword(s):  
Sheet Metal ◽  
Automobile Industry ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
High Strength Steels ◽  
Fem Analysis ◽  
High Strength ◽  
Design Stage ◽  
Springback Compensation ◽  
Compensation Approach

Abstract Springback compensation is critical in sheet metal forming. Advanced techniques have been adopted in the design stage of various sheet metal forming processes, e.g. stamping, some of which are for complex shaped products. However, the currently available numerical approaches are not always sufficiently accurate and reliable. To improve the accuracy of springback compensation, an enhanced hybrid springback compensation method named Springback Path – Displacement Adjustment (SP-DA) method has been developed in this study based on the well-known conventional displacement adjustment (DA) method. Its effectiveness is demonstrated using FEM analysis of low, medium and high strength steels adopted in automobile industry, in which a symmetrical model owning geometry complexity similar to an auto body panel was established. The results show this new enhanced SP-DA method is able to significantly improve the accuracy of springback compensation comparing to conventional displacement adjustment technique.

Advanced Materials in Sheet Metal Forming

2013 ◽  
Vol 581 ◽  
pp. 137-142 ◽  
Author(s):  
Miklós Tisza
Keyword(s):  
Sheet Metal ◽  
Automotive Industry ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Driving Forces ◽  
High Strength Steels ◽  
High Strength ◽  
Advanced Materials ◽  
Harmful Emission ◽  
Application Fields

In this paper, some recent developments in materials applied in sheet metal forming processes will be overviewed mainly from the viewpoint of automotive industry as one of the most important application fields. If we consider the main requirements in the automotive industry we can state that there are very contradictory demands on developments. Better performance with lower consumption and lower harmful emission, more safety and comfort are hardly available simultaneously with conventional materials and conventional manufacturing processes. These requirements are the main driving forces behind the material and technological developments in sheet metal forming: application of high strength steels, low weight light alloys and the appropriate non-conventional forming processes are the main target fields of developments summarized in this paper.

Optimisation of Die Radius Geometry in Sheet Metal Stamping

2011 ◽  
Vol 337 ◽  
pp. 350-353 ◽  
Author(s):  
Xuan Zhi Wang ◽  
S.H. Masood
Keyword(s):  
Tool Wear ◽  
Sheet Metal ◽  
High Strength Steels ◽  
High Strength ◽  
Sheet Metal Stamping ◽  
Advanced High Strength Steels ◽  
Metal Stamping ◽  
Contact Pressures ◽  
Abaqus Software

Advanced high strength steels (AHSS) are increasingly utilised in sheet metal stamping in the automotive manufacture. In comparison with conventional steels, AHSS stampings produce higher contact pressures at the interface between the tool-workpiece interface, leading to more severe wear conditions, particularly at the draw die radius. To minimise tool wear using this approach it would be necessary to optimise the shape for a particular combination of circular and high elliptical profiles. This paper presents a methodology to optimise a die radius profile. For this, a specialised software routine is developed and compiled for optimisation of die radius profiles to minimise or achieve uniform contact pressure (wear distribution) using Python computer programming language supported by Abaqus software. A detailed algorithm for the optimisation is explained. A case study based on the algorithm is also discussed.

Sign in / Sign up

Export Citation Format

Share Document