Dyeing of Natural Dyestuff Extracted from Henna to Silk Fabric

2011 ◽  
Vol 331 ◽  
pp. 302-305 ◽  
Author(s):  
Hong Li ◽  
De Feng Zhao ◽  
Rui Liu
Keyword(s):  
Rare Earth ◽  
Copper Sulfate ◽  
Ferrous Sulfate ◽  
Natural Dye ◽  
Silk Fabric ◽  
Wash Fastness

A natural dye was isolated from the leaves of Henna . The extracted dye was applied to silk fabric, The dyeing effects of fabric without and with different mordants were investigated . The results showed that the dyeing of silk using the post-mordanting method with ferrous sulfate、 copper sulfate and alum、 rare earth not only provided better depth of shade but also provided better wash fastness and rub fastness than without mordant. In additon, green and orange silk can obtained selecting rare earth as mordant.

Dyeing Silk Fabric with Natural Dye from Longan Leaves Using Simultaneous Mordanting Method

2016 ◽  
Vol 857 ◽  
pp. 491-494
Author(s):  
Kongkiat Maha-In ◽  
Rattanaphol Mongkholrattanasit ◽  
Charoon Klaichoi ◽  
Wiphawan Pimklang ◽  
Panida Buathong ◽  
...  
Keyword(s):  
Copper Sulfate ◽  
Ferrous Sulfate ◽  
Stannous Chloride ◽  
Natural Dye ◽  
Potassium Sulfate ◽  
Silk Fabric ◽  
Brown Colour ◽  
Colour Strength ◽  
Activity Sequence ◽  
Silk Fabrics

Natural dye solution from longan leaves was applied to the simultaneous dyeing of silk fabric and using alum, copper sulfate, ferrous sulfate and stannous chloride as a mordanting agents. The dyeing properties and effects of simultaneous-mordanting on the hue, colour strength and colour value were revealed. The results show that The K/S values increased with an increase of metal mordant concentration. The mordant activity sequence was CuSO4> FeSO4> AlK(SO4)2 > SnCl2. The obtained colour values show that silk fabrics dyed without mordant exhibited dark brown colour, while those mordanted with aluminum potassium sulfate (alum), stannous chloride and copper sulfate showed a variety of medium to dark brown shades. With ferrous sulfate, the colour shade was darker and duller. The colour fastness results showed good to very good level.

Studies on the Effect of Sinapic Acid on Silk Fabric Printing with Sorghum Red

2013 ◽  
Vol 796 ◽  
pp. 395-399 ◽  
Author(s):  
Xi Chun Dai ◽  
Zhi Wei Hang ◽  
Xiang Rong Wang
Keyword(s):  
Guar Gum ◽  
Sinapic Acid ◽  
Natural Dye ◽  
Natural Dyes ◽  
Saturated Steam ◽  
Silk Fabric ◽  
Light Fastness ◽  
Wash Fastness

In order to improve fastness of printing silk fabric with natural dyes, the influence of sinapic acid on printing of silk fabric with sorghum red was investigated in this work. The silk fabric was printed using guar gum as paste, sorghum red as natural dye, sinapic acid as auxiliaries. The appropriate steaming condition was the temperature 100°C, time 15min and saturated steam. The results showed that the light fastness and the wash fastness of the printed fabric were improved by the addition of sinapic acid. It is proposed that sinapic acid can be applied as effective fastness improver of natural dyes.

Colorimetric Study on Silk Dyeing with the Extracted Dye from Longan Leaves Using Pre-Mordanting Technique: A Research on Effect of Mordant Concentration

2014 ◽  
Vol 1010-1012 ◽  
pp. 499-502
Author(s):  
Rattanaphol Mongkholrattanasit ◽  
Kongkiat Maha-In ◽  
Charoon Klaichoi ◽  
Wiphawan Pimklang ◽  
Panida Buathong ◽  
...  
Keyword(s):  
Copper Sulfate ◽  
Ferrous Sulfate ◽  
Stannous Chloride ◽  
Potassium Sulfate ◽  
Silk Fabric ◽  
Light Fastness ◽  
Dyeing Process ◽  
Metallic Salt ◽  
Colorimetric Study ◽  
Silk Dyeing

Natural dye extracted from longan leaves was applied to a silk fabric by exhaustion dyeing process. Aluminium potassium sulfate, ferrous sulfate, copper sulfate, and stannous chloride were used as mordants. The dyeing was conducted with and without metallic salt mordants, using pre-mordanting method. Silk fabric dyed in a solution composed of a longan from leaves without mordant showed a shade of pale yellowish-brown, while those mordanted with stannous chloride, alum, and copper sulfate produced a variety of medium to dark yellowish-brown colour shades. However, duller and darker brown shade was obtained with ferrous sulfate mordant. The colour fastness to washing, water, and rubbing were good to very good. The light fastness results showed fair level.

DYEING AND COLORFASTNESS PROPERTIES OF TENCEL FABRIC TREATED WITH NATURAL DYE EXTRACTED FROM ORANGE PEEL

2020 ◽  
pp. 2050055
Author(s):  
TAYYAB NAVEED ◽  
AIJAZ AHMED BABAR ◽  
SAYED YASEEN RASHDI ◽  
FAISAL REHMAN ◽  
MUHAMMAD AWAIS NAEEM ◽  
...  
Keyword(s):  
Structural Change ◽  
Copper Sulfate ◽  
Ferrous Sulfate ◽  
Extraction Method ◽  
Orange Peel ◽  
Natural Dye ◽  
Natural Dyes ◽  
Washing Fastness ◽  
Solvent Extract

The usage of natural dyes for coloration has attained attention in recent years due to their ecofriendly environment. Therefore, in this study, orange peel solvent extract is used as a natural dye for coloring Tencel fabric samples. Pre-mordanting and post-mordanting methods were accomplished with two different mordants, i.e. ferrous sulfate and copper sulfate. The dyeing shade effects were retrieved through colorfastness properties according to the ISO standardizations. The results revealed that the best color shade ([Formula: see text]/[Formula: see text]: 4.56) was achieved using mordant ferrous sulfate through the post-mordanting method. The effect of lightfastness on all dyed Tencel fabric samples was observed good (3–4) in both mordanting methods. However, mordant ferrous sulfate showed better lightfastness (4) than copper sulfate (3–3.5) through both mordanting methods. Comparatively, in the rubbing fastness, copper sulfate has superior results in both mordanting methods. The ferrous and copper sulfates in both mordanting methods have similar tests results (4.5) of washing fastness, acidic and alkaline perspiration. Furthermore, the FTIR test substantiated that not any structural change occurred through orange peel dyed Tencel fabric samples through both methods. TGA observed samples were relatively stable up to 300∘C temperature. Overall, the best results of colorfastness for Tencel fabric samples were obtained with ferrous sulfate mordant through the post-mordanting extraction method.

Dyeing of Silk Fabric with Natural Colorant from Dimocarpus longan Leaves

2016 ◽  
Vol 848 ◽  
pp. 199-202
Author(s):  
Kongkiat Maha-In ◽  
Rattanaphol Mongkholrattanasit ◽  
Charoon Klaichoi ◽  
Wiphawan Pimklang ◽  
Panida Buathong ◽  
...  
Keyword(s):  
Copper Sulfate ◽  
Ferrous Sulfate ◽  
Stannous Chloride ◽  
Potassium Sulfate ◽  
Silk Fabric ◽  
Natural Colorant ◽  
Brown Colour ◽  
Colour Strength ◽  
Activity Sequence ◽  
Silk Fabrics

Natural dye solution from longan leaves was applied to the simultaneous dyeing of silk fabric and using alum, copper sulfate, ferrous sulfate and stannous chloride as a mordanting agents. The dyeing properties and effects of simutaneous-mordanting on the hue, colour strength and colour value were revealed. The results show that The K/S values increased with an increase of metal mordant concentration. The mordant activity sequence was CuSO4> FeSO4> AlK(SO4)2 > SnCl2. The obtained colour values show that silk fabrics dyed without mordant exhibited dark brown colour, while those mordanted with aluminum potassium sulfate (alum), stannous chloride and copper sulfate showed a variety of medium to dark brown shades. With ferrous sulfate, the colour shade was darker and duller. The colour fastness results showed good to very good level.

Application of eco-friendly natural dye obtained from Spathodea campanulata on silk using combination of mordants

2016 ◽  
Vol 27 (1) ◽  
pp. 15-21 ◽  
Author(s):  
M Kumaresan
Keyword(s):  
Large Scale ◽  
Potassium Dichromate ◽  
Ferrous Sulphate ◽  
Research Work ◽  
Natural Dye ◽  
Alkaline Media ◽  
Silk Fabric ◽  
Content Type ◽  
Wide Range ◽  
New Research

Purpose – The purpose of this paper is to extract the eco-friendly natural dye obtained from the flower of Spathodea campanulata and apply on silk fabric using combination of mordants. The fastness properties of the flower of Spathodea campanulata dyed silk fabric have been studied using different combination (1:3, 1:1 and 3:1) of various mordants, such as myrobolan: nickel sulphate, myrobolan: aluminium sulphate, myrobolan: potassium dichromate, myrobolan: ferrous sulphate and myrobolan: stannous chloride. The wash, rub, light and perspiration fastness of the dyed samples have been evaluated. Design/methodology/approach – For dyeing there are three methods are used. They are Pre mordanting, Simultaneous mordanting and Post mordanting methods. Dyed silk materials are tested by using wash fastness, rub fastness, light and perspiration fastness methods. Findings – It is found that Spathodea campanulata dye can be successfully used for the dyeing of silk to obtain a wide range colours by using various combinations of mordants. With regards to colour fastness, test samples exhibit excellent fastness to washing, rubbing, except for pre-mordanting using myrobolan: potassium dichromate combination; and good to excellent fastness to perspiration in both acidic and alkaline media. Originality/value – Availability of literature related to this work is not available. The study of combination of mordants of this natural dye on silk is a new research work and the large scale preparation is definitely very useful to the society.

The Effect of Alum, Ferrous, Stannous and NaCl on Silk Fabric Dyed with Natural Dye from Laccifer Lacca Kerr

2016 ◽  
Vol 848 ◽  
pp. 141-144 ◽  
Author(s):  
Rattanaphol Mongkholrattanasit ◽  
Chintana Saiwan ◽  
Nattadon Rungruangkitkrai ◽  
Nattaya Punrattanasin ◽  
Kamolkan Sriharuksa ◽  
...  
Keyword(s):  
Sodium Chloride ◽  
Ferrous Sulfate ◽  
Stannous Chloride ◽  
Potassium Sulfate ◽  
Silk Fabric ◽  
Test Results ◽  
Light Fastness ◽  
Aluminium Sulfate ◽  
Fastness Property ◽  
Silk Fabrics

In this research, the dyeing behavior of silk fabrics with lac was studied. The effect of different mordants concentration (potassium aluminium sulfate or alum, stannous chloride, ferrous sulfate and sodium chloride) with simultaneous mordanting procedures using pad-dry and pad-batch techniques on colour characteristics of the dyed samples was investigated. The colour fastness tests were washing and light of the dyed samples, the test results were determined according to the present ISO standard.The results show that silk fabric dyed without and with stannous chloride and sodium chloride mordant gave a shade of light pink, while those mordanted with aluminum potassium sulfate, had noticeably pink shade. The colour shade was light grey shades was obtained by adding ferrous sulfate mordant. The washing fastness property showed very poor level, while light fastness was fair level.

Influence of Microwave Radiation on Dyeing of Bio-mordanted Silk Fabric using Neem Bark (Azadirachta indica)-Based Tannin Natural Dye

2019 ◽  
Vol 17 (10) ◽  
pp. 1410-1422 ◽  
Author(s):  
Mohammad Zuber ◽  
Shahid Adeel ◽  
Fazal-Ur Rehman ◽  
Fozia Anjum ◽  
Majid Muneer ◽  
...  
Keyword(s):  
Microwave Radiation ◽  
Azadirachta Indica ◽  
Natural Dye ◽  
Silk Fabric
Sign in / Sign up

Export Citation Format

Share Document