Research on PA Heat-Melt Adhesive Being Used as Self-Healing Agent in Cementitious Materials

2011 ◽  
Vol 374-377 ◽  
pp. 1899-1903
Author(s):  
Xiong Zhou Yuan ◽  
Wei Sun ◽  
Xiao Bao Zuo
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Chemical Stability ◽  
Bonding Strength ◽  
Research Team ◽  
Cementitious Materials ◽  
Experimental Results ◽  
Self Healing ◽  
Detailed Consideration ◽  
Healing Agent

Based on detailed consideration of the autonomic healing concept of microencapsulated healing agent, micro- bacteria induced calcite and shape memory alloys, our research team proposed a new self-healing technique coupled with of SMA and heat-melt adhesive. In this article, chemical stability and bonding strength with cementitious materials of PA heat-melt adhesive were tested. Experimental results show that PA heat-melt adhesive may contain the ability being used in self-healing techniques coupled with SMA.

Study of Feasibility of Heat Melt Adhesive Being Used in Crack Self-Healing of Cement-Based Materials

2011 ◽  
Vol 99-100 ◽  
pp. 1087-1091 ◽  
Author(s):  
Xiong Zhou Yuan ◽  
Wei Sun ◽  
Xiao Bao Zuo
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Chemical Stability ◽  
Bonding Strength ◽  
Research Team ◽  
Cementitious Materials ◽  
Self Healing ◽  
Detailed Consideration ◽  
Cement Based Materials ◽  
Healing Agent

Based on detailed consideration of the autonomic healing concept of microencapsulated healing agent, micro- bacteria induced calcite and shape memory alloys, our research team proposed a new self-healing technique coupled with of SMA and heat-melt adhesive. In this article, chemical stability and bonding strength with cementitious materials of EVA heat-melt adhesive were tested. Experimental results show that EVA heat-melt adhesive may contain the ability being used in self-healing techniques coupled with SMA.

Mechanics of nickel–titanium shape memory alloys undergoing partially constrained recovery for self-healing materials

2018 ◽  
Vol 29 (15) ◽  
pp. 3025-3036 ◽  
Author(s):  
Nathan Salowitz ◽  
Ameralys Correa ◽  
Trishika Santebennur ◽  
Afsaneh Dorri Moghadam ◽  
Xiaojun Yan ◽  
...  
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Nickel Titanium ◽  
Self Healing ◽  
Bonding Agents ◽  
Compressive Loads ◽  
Martensitic State ◽  
Geometric Changes ◽  
Shape Memory Fibers

Engineered self-healing materials seek to create an innate ability for materials to restore mechanical strength after incurring damage, much like biological organisms. This technology will enable the design of structures that can withstand their everyday use without damage but also recover from damage due to an overload incident. One of the primary mechanisms for self-healing is the incorporation of shape memory fibers in a composite type structure. Upon activation, these shape memory fibers can restore geometric changes caused by damage and close fractures. To date, shape memory–based self-healing, without bonding agents, has been limited to geometric restoration without creating a capability to withstand externally applied tensile loads due to the way the shape memory material has been integrated into the composite. Some form of bonding has been necessary for self-healing materials to resist an externally applied load after healing. This article presents results of new study into using a form of constrained recovery of nickel–titanium shape memory alloys in self-healing materials to create residual compressive loads across fractures in the low temperature martensitic state. Analysis is presented relating internal loads in self-healing materials, potentially generated by shape memory alloys, to the capability to resist externally applied loads. Supporting properties were experimentally characterized in nickel–titanium shape memory alloy wires. Finally, self-healing samples were synthesized and tested demonstrating the ability to resist externally applies loads without bonding. This study provides a new useful characterization of nickel–titanium applicable to self-healing structures and opens the door to new forms of healing like incorporation of pressure-based bonding.

scholarly journals Encapsulation Techniques and Test Methods of Evaluating the Bacteria-Based Self-Healing Efficiency of Concrete: A Literature Review

2020 ◽  
Vol 62 (1) ◽  
pp. 63-85
Author(s):  
Rahul Roy ◽  
Emanuele Rossi ◽  
Johan Silfwerbrand ◽  
Henk Jonkers
Keyword(s):  
Service Life ◽  
Polymeric Materials ◽  
Cementitious Materials ◽  
Test Methods ◽  
Self Healing ◽  
Load Factors ◽  
Healing Efficiency ◽  
Healing Agent ◽  
Maximum Crack ◽  
Encapsulated Bacteria

AbstractCrack formation in concrete structures due to various load and non-load factors leading to degradation of service life is very common. Repair and maintenance operations are, therefore, necessary to prevent cracks propagating and reducing the service life of the structures. Accessibility to affected areas can, however, be difficult as the reconstruction and maintenance of concrete buildings are expensive in labour and capital. Autonomous healing by encapsulated bacteria-based self-healing agents is a possible solution. During this process, the bacteria are released from a broken capsule or triggered by water and oxygen access. However, its performance and reliability depend on continuous water supply, protection against the harsh environment, and densification of the cementitious matrix for the bacteria to act. There are vast methods of encapsulating bacteria and the most common carriers used are: encapsulation in polymeric materials, lightweight aggregates, cementitious materials, special minerals, nanomaterials, and waste-derived biomass. Self-healing efficiency of these encapsulated technologies can be assessed through many experimental methodologies according to the literature. These experimental evaluations are performed in terms of quantification of crackhealing, recovery of durability and mechanical properties (macro-level test) and characterization of precipitated crystals by healing agent (micro-level test). Until now, quantification of crack-healing by light microscopy revealed maximum crack width of 1.80mm healed. All research methods available for assesing self-healing efficiency of bacteria-based healing agents are worth reviewing in order to include a coherent, if not standardized framework testing system and a comparative evaluation for a novel incorporated bacteria-based healing agent.

scholarly journals A New Rate-Dependent Constitutive Model of Superelastic Shape Memory Alloys and Its Simple Application in a Special Truss Moment Frame Simulation

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Maria I. Ntina ◽  
Dimitrios S. Sophianopoulos
Keyword(s):  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Experimental Results ◽  
Simple Application ◽  
Moment Frame ◽  
Rate Dependent ◽  
Ongoing Work ◽  
Good Agreement

In this work, a new constitutive model of the behavior of shape-memory alloys is presented, based on earlier models, showing a very good agreement with the existing experimental results. A simple approximate application concerning the use of these alloys modelled as dissipation devices in a special truss-moment frame is demonstrated. The results obtained are considered sufficiently encouraging as a motivation for the ongoing work.

scholarly journals Biological Self-Healing of Cement Paste and Mortar by Non-Ureolytic Bacteria Encapsulated in Alginate Hydrogel Capsules

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3711
Author(s):  
Mohammad Fahimizadeh ◽  
Ayesha Diane Abeyratne ◽  
Lee Sui Mae ◽  
R. K. Raman Singh ◽  
Pooria Pasbakhsh
Keyword(s):  
Cement Paste ◽  
Healing Process ◽  
Cementitious Materials ◽  
The Self ◽  
Self Healing ◽  
Alkaline Conditions ◽  
Healing Agent ◽  
Encapsulated Bacteria ◽  
The Right

Crack formation in concrete is one of the main reasons for concrete degradation. Calcium alginate capsules containing biological self-healing agents for cementitious materials were studied for the self-healing of cement paste and mortars through in vitro characterizations such as healing agent survivability and retention, material stability, and biomineralization, followed by in situ self-healing observation in pre-cracked cement paste and mortar specimens. Our results showed that bacterial spores fully survived the encapsulation process and would not leach out during cement mixing. Encapsulated bacteria precipitated CaCO3 when exposed to water, oxygen, and calcium under alkaline conditions by releasing CO32− ions into the cement environment. Capsule rupture is not required for the initiation of the healing process, but exposure to the right conditions are. After 56 days of wet–dry cycles, the capsules resulted in flexural strength regain as high as 39.6% for the cement mortar and 32.5% for the cement paste specimens. Full crack closure was observed at 28 days for cement mortars with the healing agents. The self-healing system acted as a biological CO32− pump that can keep the bio-agents retained, protected, and active for up to 56 days of wet-dry incubation. This promising self-healing strategy requires further research and optimization.

Dual Self-Healing Mechanisms with Microcapsules and Shape Memory Alloys in Reinforced Concrete

2018 ◽  
Vol 30 (2) ◽  
pp. 04017277 ◽  
Author(s):  
Luis Bonilla ◽  
Marwa M. Hassan ◽  
Hassan Noorvand ◽  
Tyson Rupnow ◽  
Ayman Okeil
Keyword(s):  
Reinforced Concrete ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Self Healing

Self-healing efficiency of cementitious materials containing tubular capsules filled with healing agent

2011 ◽  
Vol 33 (4) ◽  
pp. 497-505 ◽  
Author(s):  
Kim Van Tittelboom ◽  
Nele De Belie ◽  
Denis Van Loo ◽  
Patric Jacobs
Keyword(s):  
Cementitious Materials ◽  
Self Healing ◽  
Healing Efficiency ◽  
Healing Agent

Crack Self-Healing Properties of Concrete with Adhesive

2014 ◽  
Vol 919-921 ◽  
pp. 1880-1884 ◽  
Author(s):  
Qing Yu Cao ◽  
Ting Yu Hao ◽  
Bo Su
Keyword(s):  
Flexural Strength ◽  
Vinyl Acetate ◽  
Ethylene Vinyl Acetate ◽  
Experimental Results ◽  
Experimental Program ◽  
Cement Matrix ◽  
Self Healing ◽  
Repair Efficiency ◽  
Healing Agent ◽  
Strength And Toughness

An experimental program was carried out to investigate whether EVA (ethylene vinyl acetate) heat-melt adhesive can potentially act as a self-healing agent in cement-based material. The effects of incorporation of EVA and heating on the properties of mortar were studied. Experimental results show that the interface between EVA and cement matrix was well improved after heating, which allows a significant improvement in flexural strength and toughness of specimen; Pre-damaged specimens in various degrees (30%, 50% and 70%) were effectively repaired by EVA and the repair efficiency all exceeded 100%. Keywords:crack; heat-melt adhesive; self-repairing

Sign in / Sign up

Export Citation Format

Share Document