scholarly journals Voltage Coordination via Communication in Large-Scale Multi-Area Power Systems. Part II: Simulation Results

2012 ◽  
Vol 433-440 ◽  
pp. 7183-7189
Author(s):  
Mohammad Moradzadeh ◽  
René Boel
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electricity Market ◽  
Large Scale ◽  
Test System ◽  
Distributed Model ◽  
Future Evolution ◽  
Distributed Model Predictive Control ◽  
Control Actions ◽  
Simulation Results

This two-part paper deals with the coordination of the control actions in a network of many interacting components, where each component is controlled by independent control agents. As a case study we consider voltage control in large electric power systems where ever-increasing pressures from the liberalization and globalization of the electricity market has led to partitioning the power system into multiple areas each operated by an independent Transmission System Operator (TSO). Coordination of local control actions taken by those TSOs is a very challenging problem as poorly coordinated operation of TSOs may endanger the power system security by increasing the risk of blackouts. This second part of the paper presents simulation results on a 12-bus 3-area test system, using the distributed model predictive control paradigm in order to design a coordinating model-based feedback controller. Coordination requires that each agent has some information on what the future evolution of its power flows to and from its neighbors will be. It will be shown that how the communication between agents can avoid voltage collapse in circumstances where classical uncoordinated controllers fail.

scholarly journals Voltage Coordination via Communication in Large-Scale Multi-Area Power Systems. Part I: Principal

2012 ◽  
Vol 433-440 ◽  
pp. 7175-7182
Author(s):  
Mohammad Moradzadeh ◽  
René Boel
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electricity Market ◽  
Large Scale ◽  
Electric Power Systems ◽  
Coordination Control ◽  
Coordination Problem ◽  
Control Actions ◽  
System Operator

This two-part paper deals with the coordination of the control actions in a network of many interacting components, where each component is controlled by independent control agents. As a case study we consider voltage control in large electric power systems, where ever-increasing pressures from the liberalization and globalization of the electricity market has led to partitioning the power system into multiple areas each operated by an independent Transmission System Operator (TSO). Coordination of local control actions taken by those TSOs is a very challenging problem as poorly coordinated operation of TSOs may endanger the power system security by increasing the risk of blackouts. This coordination problem involves many other issues such as communication, abstraction and last but not least optimization. This first part of the paper is devoted to the principals of the coordination control, addressing some of those issues using as a case study the problem of coordination control for avoiding voltage collapse in large-scale multi-area power systems.

scholarly journals The Flexible Operation of Coal Power and Its Renewable Integration Potential in China

2019 ◽  
Vol 11 (16) ◽  
pp. 4424 ◽  
Author(s):  
Chunning Na ◽  
Huan Pan ◽  
Yuhong Zhu ◽  
Jiahai Yuan ◽  
Lixia Ding ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Large Scale ◽  
Renewable Integration ◽  
Flexible Resources ◽  
Feasible Option ◽  
Coal Power ◽  
Simulation Results ◽  
Flexible Operation

At present time, China’s power systems face significant challenges in integrating large-scale renewable energy and reducing the curtailed renewable energy. In order to avoid the curtailment of renewable energy, the power systems need significant flexibility requirements in China. In regions where coal is still heavily relied upon for generating electricity, the flexible operations of coal power units will be the most feasible option to face these challenges. The study first focused on the reasons why the flexible operation of existing coal power units would potentially promote the integration of renewable energy in China and then reviewed the impacts on the performance levels of the units. A simple flexibility operation model was constructed to estimate the integration potential with the existing coal power units under several different scenarios. This study’s simulation results revealed that the existing retrofitted coal power units could provide flexibility in the promotion of the integration of renewable energy in a certain extent. However, the integration potential increment of 20% of the rated power for the coal power units was found to be lower than that of 30% of the rated power. Therefore, by considering the performance impacts of the coal power units with low performances in load operations, it was considered to not be economical for those units to operate at lower than 30% of the rated power. It was believed that once the capacity share of the renewable energy had achieved a continuously growing trend, the existing coal power units would fail to meet the flexibility requirements. Therefore, it was recommended in this study that other flexible resources should be deployed in the power systems for the purpose of reducing the curtailment of renewable energy. Furthermore, based on this study’s obtained evidence, in order to realize a power system with high proportions of renewable energy, China should strive to establish a power system with adequate flexible resources in the future.

scholarly journals Towards the Integration of Modern Power Systems into a Cyber–Physical Framework

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2169
Author(s):  
George C. Konstantopoulos ◽  
Antonio T. Alexandridis ◽  
Panos C. Papageorgiou
Keyword(s):  
Power Systems ◽  
Power System ◽  
Communication Networks ◽  
Electricity Market ◽  
Large Scale ◽  
Control Mechanisms ◽  
Research And Innovation ◽  
Main Challenge ◽  
Market Management ◽  
Social Environmental

The cyber–physical system (CPS) architecture provides a novel framework for analyzing and expanding research and innovation results that are essential in managing, controlling and operating complex, large scale, industrial systems under a holistic insight. Power systems constitute such characteristically large industrial structures. The main challenge in deploying a power system as a CPS lies on how to combine and incorporate multi-disciplinary, core, and advanced technologies into the specific for this case, social, environmental, economic and engineering aspects. In order to substantially contribute towards this target, in this paper, a specific CPS scheme that clearly describes how a dedicated cyber layer is deployed to manage and interact with comprehensive multiple physical layers, like those found in a large-scale modern power system architecture, is proposed. In particular, the measurement, communication, computation, control mechanisms, and tools installed at different hierarchical frames that are required to consider and modulate the social/environmental necessities, as well as the electricity market management, the regulation of the electric grid, and the power injection/absorption of the controlled main devices and distributed energy resources, are all incorporated in a common CPS framework. Furthermore, a methodology for investigating and analyzing the dynamics of different levels of the CPS architecture (including physical devices, electricity and communication networks to market, and environmental and social mechanisms) is provided together with the necessary modelling tools and assumptions made in order to close the loop between the physical and the cyber layers. An example of a real-world industrial micro-grid that describes the main aspects of the proposed CPS-based design for modern electricity grids is also presented at the end of the paper to further explain and visualize the proposed framework.

scholarly journals Bi-Objective Optimization Model for Optimal Placement of Thyristor-Controlled Series Compensator Devices

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2601
Author(s):  
Mohammad Reza Salehizadeh ◽  
Mahdi Amidi Koohbijari ◽  
Hassan Nouri ◽  
Akın Taşcıkaraoğlu ◽  
Ozan Erdinç ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electricity Market ◽  
Weather Conditions ◽  
Congestion Management ◽  
Optimal Placement ◽  
Novel Approach ◽  
Simulation Results ◽  
Increasing Demand ◽  
Thyristor Controlled Series Compensator

Exposure to extreme weather conditions increases power systems’ vulnerability in front of high impact, low probability contingency occurrence. In the post-restructuring years, due to the increasing demand for energy, competition between electricity market players and increasing penetration of renewable resources, the provision of effective resiliency-based approaches has received more attention. In this paper, as the major contribution to current literature, a novel approach is proposed for resiliency improvement in a way that enables power system planners to manage several resilience metrics efficiently in a bi-objective optimization planning model simultaneously. For demonstration purposes, the proposed method is applied for optimal placement of the thyristor controlled series compensator (TCSC). Improvement of all considered resilience metrics regardless of their amount in a multi-criteria decision-making framework is novel in comparison to the other previous TCSC placement approaches. Without loss of generality, the developed resiliency improvement approach is applicable in any power system planning and operation problem. The simulation results on IEEE 30-bus and 118-bus test systems confirm the practicality and effectiveness of the developed approach. Simulation results show that by considering resilience metrics, the performance index, importance of curtailed consumers, congestion management cost, number of curtailed consumers, and amount of load loss are improved by 0.63%, 43.52%, 65.19%, 85.93%, and 85.94%, respectively.

scholarly journals A Multi-Criteria Decision Framework for Optimal Augmentation of Transmission Grid - Addressing a Tool for Sensitive Zone Detection in Electricity Market

2008 ◽  
Vol 9 (4) ◽  
Author(s):  
Mohammad R. Hesamzadeh ◽  
Nasser Hosseinzadeh ◽  
Peter J Wolfs
Keyword(s):  
Sensitivity Analysis ◽  
Power Systems ◽  
Electricity Market ◽  
Large Scale ◽  
Test System ◽  
Transmission System ◽  
System Structure ◽  
Transmission Grid ◽  
Expansion Planning ◽  
Transmission Expansion

Transmission system structure has an essential effect on the reliability of the power system and electricity market performance, especially when producers bid strategically. As part of on-going research on the design of a robust algorithm for expansion planning of the transmission grid in the Australian electricity market, this paper presents a framework which addresses: (1) the security of power delivery to the load points of the transmission system in case of single line outages; (2) the minimization of transmission system lost load; (3) an efficient electricity market for market participants; (4) construction and maintenance costs of transmission augmentation options; and (5) operation efficiency of the transmission grid.The suggested algorithm benefits from the dynamic programming and sensitivity analysis approaches along with the aggregation method in its multi-criteria decision-making to locate the optimum configuration of a future transmission system. A set of indices, which account for impacts of the augmentation options of the transmission grid on five aforementioned reliability and market criteria, are proposed and used in the optimum framework for expansion planning of the transmission grid.Although the methodology is promising for expansion planning of the transmission system, considering the sensitivity analysis concept employed, the proposed methodology would be suitable to detect the sensitive areas of the transmission system to be expanded. The tool would be very useful in the case of large scale power systems for a smart reduction of the transmission expansion options.The proposed methodology has been applied to a 6-bus and a modified IEEE 30-bus test system to show the effectiveness of the sensitivity-based algorithm.

scholarly journals Robust Distributed Model Predictive Load Frequency Control of Interconnected Power System

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Xiangjie Liu ◽  
Huiyun Nong ◽  
Ke Xi ◽  
Xiuming Yao
Keyword(s):  
Power System ◽  
Large Scale ◽  
Frequency Control ◽  
Load Frequency Control ◽  
Distributed Model ◽  
Linear Matrix ◽  
Interconnected Power System ◽  
Load Frequency ◽  
Distributed Model Predictive Control ◽  
System A

Considering the load frequency control (LFC) of large-scale power system, a robust distributed model predictive control (RDMPC) is presented. The system uncertainty according to power system parameter variation alone with the generation rate constraints (GRC) is included in the synthesis procedure. The entire power system is composed of several control areas, and the problem is formulated as convex optimization problem with linear matrix inequalities (LMI) that can be solved efficiently. It minimizes an upper bound on a robust performance objective for each subsystem. Simulation results show good dynamic response and robustness in the presence of power system dynamic uncertainties.

scholarly journals Intellectualization of Emergency Control of Power Systems on the Basis of Incorporated Ontologies of Knowledge-Bases

2019 ◽  
Vol 13 (2) ◽  
pp. 86-94
Author(s):  
Vladimir Morkun ◽  
Ihor Kotov
Keyword(s):  
Decision Support ◽  
Decision Support System ◽  
Power Systems ◽  
Power System ◽  
Knowledge Base ◽  
Support System ◽  
Large Scale ◽  
Knowledge Bases ◽  
Experiment Planning ◽  
Control Actions

Abstract The research deals with improvement of methods and systems of controlling integrated power systems (IPSs) on the basis of intellectualization of decision-making support. Complex analysis of large-scale accidents at power facilities is performed, and their causes and damages are determined. There is substantiated topicality of building condition knowledge-bases as the foundation for developing decision-support systems in power engineering. The top priorities of the research include developing methods of building a knowledge base based on intensity models of control actions influencing the parameters of power system conditions and introducing the smart system into information contours of the automated dispatch control system (ADCS), as well as assessing practical results of the research. To achieve these goals, the authors apply methods of experiment planning, artificial intelligence, knowledge presentation, mathematical simulation, and mathematical statistics as well as methods of power systems studying. The basic research results include regression models of a power system sensitivity to control actions, methods of building a knowledge base based on the models of sensitivity matrices, a structure of the smart decision-support system, a scheme of introducing the decision-support system into the operating ADCS environment. The problem of building a knowledge base of the dispatch decision-support system on the basis of empirical data resulted from calculating experiments on the system diagram has been solved. The research specifies practical efficiency of the suggested approaches and developed models.

scholarly journals Methodology for Implementing the State Estimation in Renewable Energy Management Systems

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2301
Author(s):  
Yun-Sung Cho ◽  
Yun-Hyuk Choi
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
State Estimation ◽  
Measurement Errors ◽  
Large Scale ◽  
Test System ◽  
The State ◽  
Inner Function ◽  
Outer Function ◽  
Bad Data

This paper describes a methodology for implementing the state estimation and enhancing the accuracy in large-scale power systems that partially depend on variable renewable energy resources. To determine the actual states of electricity grids, including those of wind and solar power systems, the proposed state estimation method adopts a fast-decoupled weighted least square approach based on the architecture of application common database. Renewable energy modeling is considered on the basis of the point of data acquisition, the type of renewable energy, and the voltage level of the bus-connected renewable energy. Moreover, the proposed algorithm performs accurate bad data processing using inner and outer functions. The inner function is applied to the largest normalized residue method to process the bad data detection, identification and adjustment. While the outer function is analyzed whether the identified bad measurements exceed the condition of Kirchhoff’s current law. In addition, to decrease the topology and measurement errors associated with transformers, a connectivity model is proposed for transformers that use switching devices, and a transformer error processing technique is proposed using a simple heuristic method. To verify the performance of the proposed methodology, we performed comprehensive tests based on a modified IEEE 18-bus test system and a large-scale power system that utilizes renewable energy.

scholarly journals A Novel Methodology for Adaptive Coordination of Multiple Controllers in Electrical Grids

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1474
Author(s):  
Ruben Tapia-Olvera ◽  
Francisco Beltran-Carbajal ◽  
Antonio Valderrabano-Gonzalez ◽  
Omar Aguilar-Mejia
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electric Power ◽  
Large Scale ◽  
Short Circuit ◽  
Dynamic Performance ◽  
Low Frequency ◽  
Electric Power System ◽  
Design Stage ◽  
Positive Interaction

This proposal is aimed to overcome the problem that arises when diverse regulation devices and controlling strategies are involved in electric power systems regulation design. When new devices are included in electric power system after the topology and regulation goals were defined, a new design stage is generally needed to obtain the desired outputs. Moreover, if the initial design is based on a linearized model around an equilibrium point, the new conditions might degrade the whole performance of the system. Our proposal demonstrates that the power system performance can be guaranteed with one design stage when an adequate adaptive scheme is updating some critic controllers’ gains. For large-scale power systems, this feature is illustrated with the use of time domain simulations, showing the dynamic behavior of the significant variables. The transient response is enhanced in terms of maximum overshoot and settling time. This is demonstrated using the deviation between the behavior of some important variables with StatCom, but without or with PSS. A B-Spline neural networks algorithm is used to define the best controllers’ gains to efficiently attenuate low frequency oscillations when a short circuit event is presented. This strategy avoids the parameters and power system model dependency; only a dataset of typical variable measurements is required to achieve the expected behavior. The inclusion of PSS and StatCom with positive interaction, enhances the dynamic performance of the system while illustrating the ability of the strategy in adding different controllers in only one design stage.

Sign in / Sign up

Export Citation Format

Share Document