Microstructure Characterization of Ag Nanoparticles Prepared by Hydrothermal Method

2012 ◽  
Vol 476-478 ◽  
pp. 1138-1141
Author(s):  
Zhi Qiang Wei ◽  
Qiang Wei ◽  
Li Gang Liu ◽  
Hua Yang ◽  
Xiao Juan Wu
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Hydrothermal Method ◽  
Ag Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Face Centered

Ag nanoparticles were successfully synthesized by hydrothermal method under the polyol system combined with traces of sodium chloride, Silver nitrate(AgNO3) and polyvinylpyrrolidone (PVP) acted as the silver source and dispersant respectively. The samples by this process were characterized via X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED) to determine the chemical composition, particle size, crystal structure and morphology. The experiment results indicate that the crystal structure of the samples is face centered cubic (FCC) structure as same as the bulk materials, The specific surface area is 24 m2/g, the particle size distribution ranging from10 to 50 nm, with an average particle size about 26 nm obtained by TEM and confirmed by XRD and BET results.

Study on Nickel Nanopowders Prepared by Arc Plasma

2013 ◽  
Vol 734-737 ◽  
pp. 1555-1558
Author(s):  
Cong Hua Hou ◽  
Yun Ge Chen
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Barometric Pressure ◽  
Constant Current ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Arc Plasma ◽  
X Ray Diffraction ◽  
Current Voltage ◽  
Face Centered

In order to prepare the nickel nano-metal with high purity and uniform particle size , the arc plasma method was used. The nano-Ni was got under a constant current , voltage , barometric pressure, hydrogen and argon gas . The nickel nanopowders were tested through the Scan Electron Microscope (SEM ), X-ray diffraction (XRD), Laser Sizer Analysis (LSA). The results indicated that the feature of the nickel nanopowders were mainly spherical, smooth surface. The nickel powder particle distribute from 40 to 80nm. And average particle size is 60nm. Nanocrystals had a better internal crystallinity. The crystal structure is face-centered cubic FCC structure, the same as ordinary nickel nanoparticles .

Preparation of Fe Nanoparticles by Confined Arc Plasma Method

2012 ◽  
Vol 476-478 ◽  
pp. 1206-1209
Author(s):  
Xiao Ju Yao ◽  
Zhi Qiang Wei ◽  
Hua Yang ◽  
Li Gang Liu
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Average Particle ◽  
Arc Plasma ◽  
X Ray ◽  
Plasma Method ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Fe Nanoparticles ◽  
Bcc Structure

In the protecting inert gas, Fe nanoparticles were successfully prepared by confined arc plasma method. The particle size, microstructure and morphology of the particles by this process were characterized via X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED). The experiment results indicate that the samples by this process distributed uniform with spherical chain shapes, the crystal structure is body centered cubic (BCC) structure as same as the bulk materials, the particle size distribution ranging from 20 to 70 nm, with an average particle size about 39 nm obtained by TEM and confirmed by XRD and BET results. The specific surface area is 17.5 m2/g.

Synthesis of n-Hexadecylphosphonic Acid-Coated Monodisperse Fe3O4 Superparamagnetic Nanoparticles

2012 ◽  
Vol 512-515 ◽  
pp. 170-173
Author(s):  
Xue Song Tang ◽  
Ming Li
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Drug Loading ◽  
Average Particle Size ◽  
Superparamagnetic Nanoparticles ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Cubic Crystal ◽  
Transmission Electron ◽  
Potential Applications

Monodisperse Fe3O4 Superparamagnetic Nanoparticles Were Synthesized in N-Hexadecylphosphonic Acid/ Cyclohexane/ Water/ Ethanol Microemulsion under Solvothermal Conditions at 100°C. the Crystal Structure and Particle Size of Synthesized Fe3O4 Were Observed by X-Ray Diffraction (XRD) as Well as Transmission Electron Microscopy (TEM). the Results Show that the Nanoparticles Have a Cubic Crystal System and a Average Particle Size of about 10nm. each Nanoparticle Has a Single Crystal Structure. the Surface Chemistry of Synthesized Fe3O4 Nanoparticles Was Characterized by Fourier Transform Infrared Spectroscopy (FTIR), Indicating that the Nanoparticles Were Covered by a Layer of N-Hexadecylphosphonic Acid, which Made the Nanoparticles Totally Lipophilic. Magnetic Properties of the Nanoparticles Were Investigated by Using Vibrating Sample Magnetometer (VSM). the Result Reveals that the Saturation Magnetization (Ms) of the Nanoparticles Is Higher than 40 Emu/G and the Coercive Force Is near to 0. the Monodisperse Fe3O4 Nanoparticles Have Superparamagnetic Property and May Find Potential Applications in many Fields, such as Ferrofluids, Drug Loading and Release, Selective Biomolecular Separation and MRI.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

Effect of Annealing Conditions on Microstructure Evolution of NiMnFeGa Shape Memory Thin Film

2010 ◽  
Vol 150-151 ◽  
pp. 1745-1749
Author(s):  
Hai Bo Wang ◽  
Li Ma ◽  
Wei Cai
Keyword(s):  
Thin Film ◽  
Shape Memory ◽  
Microstructure Evolution ◽  
Face Centered Cubic ◽  
Free Standing ◽  
Annealing Conditions ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Face Centered ◽  
Ferromagnetic Shape Memory

The microstructure evolution of sputtered polycrystalline Ni54.75Mn13.25Fe7Ga25 ferromagnetic shape memory thin film annealed under different conditions is studied. Microstructure of different annealed films was studied using Transmission Electron Microscope (TEM) and corresponding selected area electron diffraction (SAED) patterns. The result shows that in the microstructure of as-deposited Ni54.75Mn13.25Fe7Ga25 free-standing film, after annealed at 1073 K for different time, the crystalline grain grows up with the increase of the annealing time. By analysis of the SAED patterns, the structure of the thin films change from face-centered cubic austenite to orthorhombic structure martensite compared between the film annealed at 1073 K for 10 mins, 1hr, 4 hrs, and 24 hrs respectively. It indicated that the heat treatment is an effective method of crystallizing behavior for the thin film.

Facile Synthesis and Characterization of Fe-Co Nanoparticles Supported Silica Rice Husk

2016 ◽  
Vol 709 ◽  
pp. 66-69
Author(s):  
Jeyashelly Andas ◽  
Rahmah Atikah Rosdi ◽  
Nur Izzati Mohd Anuar
Keyword(s):  
Particle Size ◽  
Rice Husk ◽  
Sol Gel ◽  
Average Particle Size ◽  
Average Particle ◽  
Silica Source ◽  
Transmission Electron ◽  
Particle Size Analyzer ◽  
Bimetallic Materials ◽  
Co Nanoparticles

A series of Fe-Co nanoparticles were synthesized via sol-gel route at acidic, neutral and basic condition using rice husk as the silica source. The synthesized nanomaterials were designated as Fe-Co3, Fe-Co7 and Fe-Co9 and characterized by Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) and particle size analyzer. The great effect of pH was clearly evidenced from the shifting in the siloxane bond in the FTIR spectrum. TEM investigation confirmed the existence of discrete and almost sphere like nanoparticles. The particle size decreased with an increase in the pH, registering the smallest average particle size at pH 9. In brief, this study promises a fast, rapid and promising method for the conversion of silica rice husk into nanoscale bimetallic materials.

Preparation and Particle Size Characterization of Cu Nanoparticles Prepared by Anodic Arc Plasma

2010 ◽  
Vol 92 ◽  
pp. 163-169
Author(s):  
Hong Xia Qiao ◽  
Zhi Qiang Wei ◽  
Ming Ru Zhou ◽  
Zhong Mao He
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Specific Surface ◽  
Size Distribution ◽  
Surface Area ◽  
Specific Surface Area ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Average Particle ◽  
Uniform Size

Copper nanoparticles were successfully prepared in large scales by means of anodic arc discharging plasma method in inert atmosphere. The particle size, specific surface area, crystal structure and morphology of the samples were characterized by X-ray diffraction (XRD), BET equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED). The experiment results indicate that the crystal structure of the samples is fcc structure as same as that of the bulk materials. The specific surface area is is 11 m2/g, with the particle size distribution ranging from 30 to 90 nm, the average particle size about 67nm obtained from TEM and confirmed from XRD and BET results. The nanoparticles have uniform size, higher purity, narrow size distribution and spherical shape can be prepared by this convenient and effective method.

The Aggregation Study and Characterization of Silver Nanoparticles

2017 ◽  
Vol 263 ◽  
pp. 165-169
Author(s):  
Silvia Chowdhury ◽  
Faridah Yusof ◽  
Nadzril Sulaiman ◽  
Mohammad Omer Faruck
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Absorption Spectrum ◽  
Average Particle Size ◽  
Average Particle ◽  
Transmission Electron ◽  
Vis Spectroscopy

In this article, we have studied the process of silver nanoparticles (AgNPs) aggregation and to stop aggregation 0.3% Polyvinylpyrrolidone (PVP) was used. Aggregation study carried out via UV-vis spectroscopy and it is reported that the absorption spectrum of spherical silver nanoparticles were found a maximum peak at 420 nm wavelength. Furthermore, Transmission Electron Microscopy (TEM) were used to characterized the size and shape of AgNPs, where the average particle size is around 10 to 25 nm in diameter and the AgNPs shape is spherical. Next, Dynamic Light Scattering (DLS) were used, owing to observed size distribution and self-correlation of AgNPs.

Fabrication and Characterization of Nanospinel ZnCr2O4 Using Thermal Treatement Method

2015 ◽  
Vol 1107 ◽  
pp. 301-307 ◽  
Author(s):  
Salahudeen A. Gene ◽  
Elias B. Saion ◽  
Abdul Halim Shaari ◽  
Mazliana A. Kamarudeen ◽  
Naif Mohammed Al-Hada
Keyword(s):  
Particle Size ◽  
Calcination Temperature ◽  
Average Particle Size ◽  
Treatment Method ◽  
Esr Spectra ◽  
Resonance Spectroscopy ◽  
Average Particle ◽  
Face Centered Cubic ◽  
X Ray ◽  
Xrd Patterns

The fabrication of nanospinel zinc chromite (ZnCr2O4) crystals by the means of thermal treatment method from an aqueous solution containing metal nitrates, polyvinyl pyrrolidone (PVP), and deionized water was described in this study. The samples were calcined at various temperatures ranging from 773 to 973 K for the decomposition of the organic compounds and crystallization of the nanocrystals. PVP was used as capping agent to control the agglomeration of the particles. The characterization studies of the fabricated samples were carried out by X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), energy dispersed X-ray spectroscopy (EDX) and electron spin resonance spectroscopy (ESR). The corresponding peaks of Zn, Cr and O were observed in the EDX spectrum of the sample which confirms the formation of ZnCr2O4. The XRD patterns also confirmed the formation of the single faced nanocrystallines of spinel ZnCr2O4 with a face-centered cubic structure. The average particle size of the synthesized crystals was also determined from the XRD patterns using the Scherers formula which shows that the crystallite sizes increases with increase in calcination temperature and was in good agreement with the TEM images which shows cubical ZnCr2O4 nanocrystals with uniform morphology and particle size distributions. The ESR spectra confirmed the existence of unpaired electron in the fabricated samples and the increase in g-factor and decreases in resonant magnetic field (Hr) were observed as the calcination temperature increases.

Novel Nanohybrids Derived from the Attachment of FePt Nanoparticles on Carbon Nanotubes

2008 ◽  
Vol 8 (11) ◽  
pp. 5942-5951 ◽  
Author(s):  
Theodoros Tsoufis ◽  
Aphrodite Tomou ◽  
Dimitrios Gournis ◽  
Alexios P. Douvalis ◽  
Ioannis Panagiotopoulos ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Carbon Nanotubes ◽  
Particle Size ◽  
Fept Nanoparticles ◽  
Face Centered Cubic ◽  
Magnetization Measurements ◽  
Hybrid Sample ◽  
The Face ◽  
Face Centered ◽  
Mwcnts Surface

Multiwalled carbon nanotubes (MWCNTs) were used as nanotemplates for the dispersion and stabilization of FePt nanoparticles (NPs). Pre-formed capped FePt NPs were connected to the MWCNTs external surface via covalent binding through organic linkers. Free FePt NPs and MWCNTs-FePt hybrids were annealed in vacuum at 700 °C in order to achieve the L10 ordering of the FePt phase. Both as prepared and annealed samples were characterized and studied using a combination of experimental techniques, such as Raman and Mössbauer spectroscopies, powder X-ray Diffraction (XRD), magnetization and transmittion electron microscopy (TEM) measurements. TEM measurements of the hybrid sample before annealing show that a fine dispersion of NPs along the MWCNTs surface is achieved, while a certain amount of free particles attached to each other in well connected dense assemblies of periodical or non-periodical particle arrangements is also observed. XRD measurements reveal that the FePt phase has the face-centered cubic (fcc) disordered crystal structure in the as prepared samples, which is transformed to the face-centered tetragonal (fct) L10 ordered crystal structure after annealing. An increase in the average particle size is observed after annealing, which is higher for the free NPs sample. Superparamagnetic phenomena due to the small FePt particle size are observed in the Mössbauer spectra of the as prepared samples. Mössbauer and magnetization measurements of the MWCNTs-FePt hybrids sample reveal that the part of the FePt particles attached to the MWCNTs surface shows superparamagnetic phenomena at RT even after the annealing process. The hard magnetic L10 phase characteristics are evident in the magnetization measurements of both samples after annealing, with the coercivity of the hybrid sample over-scaling that of the free NPs sample by a factor of 1.25.

Sign in / Sign up

Export Citation Format

Share Document