Proposal of Purification Method of Grinding Coolant by Dissolution of Micro-Bubbles

2012 ◽  
Vol 565 ◽  
pp. 406-411
Author(s):  
Haruhisa Sakamoto ◽  
Hitoshi Tsubakiyama ◽  
Masaki Takeishi
Keyword(s):  
Surface Roughness ◽  
Ground Surface ◽  
Supply System ◽  
Grinding Wheel ◽  
Initial Condition ◽  
Purification Method ◽  
Micro Bubble ◽  
Grinding Machine ◽  
Ground Surface Roughness ◽  
Electrical Adsorption

In this study, the purification method of coolant by the micro-bubble dissolution is proposed. The micro-bubble dissolving device with the simple configuration is incorporated within the coolant supply system of an external grinding machine, and then, the effect of the purification method is examined experimentally on the ground surface roughness. From the results, the following are clarified: The dissolved micro-bubbles can rise up grinding debris by electrical adsorption, and then, the debris is concentrated on the coolant surface in the coolant tank. By this effect, the grinding debris, especially the grain fragments of the grinding-wheel, can be removed from the coolant. The coolant purification by the enough dissolved micro-bubbles reduces the density of grinding debris down to a fourth of the initial condition. This purification effect improves the ground surface roughness. The longer the dissolving duration is, the more the ground surface roughness is improved. Eventually, the improvement of the surface roughness reaches down to a half of that without the micro-bubble dissolution.

Development of Electroplated CBN Wheel with Cemented Carbide Base for Precision Grinding of Compressor Cylinder Vane Slot

2007 ◽  
Vol 329 ◽  
pp. 495-500
Author(s):  
Hang Gao ◽  
W.G. Liu ◽  
Y.G. Zheng
Keyword(s):  
Surface Roughness ◽  
Ground Surface ◽  
Cemented Carbide ◽  
Grinding Wheel ◽  
Precision Grinding ◽  
Base Surface ◽  
Compressor Cylinder ◽  
Cbn Wheel ◽  
Micro Holes ◽  
Ground Surface Roughness

It is experimentally found that existing micro-holes or micro-concaves on the cemented carbide base surface of electroplated CBN wheel is one of important reasons to worsen the combining intensity of the electroplated abrasives layer with the grinding wheel base. It is well solved by sealing the holes or concaves with steam sealing method. Further more the electroplated CBN wheel with cemented carbide base for precision grinding of compressor cylinder vane slot is developed by optimizing the electroplating prescription and process. Productive grinding results show that the ground surface roughness, size precision and the wheel life have reached the advanced index of the same type of wheel imported.

scholarly journals Evaluation of the Relationship Among Dressing Conditions Using Prismatic Dresser, Dressing Resistance, and Grinding Characteristics

2022 ◽  
Vol 16 (1) ◽  
pp. 12-20
Author(s):  
Gen Uchida ◽  
Takazo Yamada ◽  
Kouichi Ichihara ◽  
Makoto Harada ◽  
Tatsuya Kohara ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Condition ◽  
Ground Surface ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Practical Application ◽  
Wheel Surface ◽  
The Difference ◽  
Ground Surface Roughness ◽  
The Relationship

In the grinding process, the grinding wheel surface condition changes depending on the dressing conditions, which affects the ground surface roughness and grinding resistance. Several studies have been reported on the practical application of dressing using prismatic dressers in recent years. However, only a few studies that quantitatively evaluate the effects of differences in dressing conditions using prismatic dresser on the ground surface roughness and grinding resistance have been reported. Thus, this study aims to evaluate quantitatively the effect of the difference in dressing conditions using the prismatic dresser on the ground surface roughness and grinding resistance by focusing on the dressing resistance. In the experiment, dressing is performed by changing the dressing lead and the depth of dressing cut with a prismatic dresser, and the ground surface roughness and grinding resistance are measured. Consequently, by increasing the dressing lead and the depth of dressing cut, the ground surface roughness increased, and the grinding resistance decreased. This phenomenon was caused by the increase in dressing resistance when the dressing lead and the depth of dressing cut were increased, which caused a change in the grinding wheel surface condition. Furthermore, the influence of the difference in dressing conditions using the prismatic dresser on the ground surface roughness and grinding resistance can be quantitatively evaluated by using the dressing resistance.

Experimental Investigation on Effects of Depth of Cut on Micro-Geometric Properties in Quick-Point Grinding

2007 ◽  
Vol 359-360 ◽  
pp. 103-107
Author(s):  
Shi Chao Xiu ◽  
Chang He Li ◽  
Guang Qi Cai
Keyword(s):  
Surface Roughness ◽  
Point Contact ◽  
Ground Surface ◽  
Depth Of Cut ◽  
Grinding Wheel ◽  
Abrasive Wheel ◽  
Geometric Properties ◽  
Edge Contact ◽  
Contact Width ◽  
Ground Surface Roughness

Quick-point grinding is used to machine the round surface with super abrasive wheel at high grinding speed. Because it is point contact between the grinding wheel and the workpiece due to the point grinding angles in the process, the grinding model is different from the conventional cylindrical grinding in theory. Especially, the edge contact width between the wheel and the workpiece is not always equal to the thickness of the wheel, but rests with the depth of cut and the grinding angles greatly. The depth of cut has the effects on the micro-geometric properties especially the ground surface roughness by means of the variations of the edge contact width, the grinding force and heat in the process. Based on the theoretical studies on the surface roughness, the quick-point grinding experiments and the measures for the surface roughness were performed at different depth of cut. The effective mechanism of the depth of cut on the ground surface roughness was analyzed deeply. Some conclusions to influence surface roughness were also gained.

Study on Effects of Grinding Speed on Finish and Precision Machining in Quick-Point Grinding

2007 ◽  
Vol 364-366 ◽  
pp. 696-700
Author(s):  
Shi Chao Xiu ◽  
Suo Xian Yuan ◽  
Chang He Li ◽  
Guang Qi Cai
Keyword(s):  
Surface Roughness ◽  
Point Contact ◽  
Ground Surface ◽  
Precision Machining ◽  
Depth Of Cut ◽  
Grinding Wheel ◽  
Workpiece Surface ◽  
Influencing Mechanism ◽  
Grinding Speed ◽  
Ground Surface Roughness

According to the analysis in theory, the model of quick-point grinding is different from conventional cylindrical grinding because it is point contact between the grinding wheel and the workpiece due to the point-grinding angles in two directions and the lower grain depth of cut in the process. Especially, the grinding speed has the great effects on the micro-geometry properties and the machining precision of the workpiece surface in the process. Based on the theoretical studies on the surface roughness, the grinding experiments and the measurements of the surface roughness at high grinding speeds were performed in quick-point grinding process. Furthermore, the influencing mechanism of the grinding speed on the ground surface roughness was analyzed. Some conclusions of the grinding parameters influencing precision machining and surface integrity were deduced.

Order Statistical Approach to Ground Surface Generation

1981 ◽  
Vol 103 (1) ◽  
pp. 22-32 ◽  
Author(s):  
M. Hasegawa
Keyword(s):  
Surface Roughness ◽  
Order Statistics ◽  
Statistical Approach ◽  
Ground Surface ◽  
Experimental Results ◽  
Surface Generation ◽  
Grinding Wheel ◽  
Curvature Radius ◽  
Statistical Relationship ◽  
Ground Surface Roughness

This paper discusses the statistical relationship between the shape of the grinding wheel dressing mechanism and the effect of the distribution of the cutting edges on the surface roughness produced. The principal concept is based on the order statistics in order to derive formulae of the ground surface roughness under the most restrictive conditions possible. In this paper, the randomness of the cutting edges on the grinding wheel face and the effect of the curvature radius of the grinding wheel on the surface roughness are taken into consideration. To check the validity of the theory, a comparison of theoretical and experimental results was carried out.

Effect of Contact Stiffness of Grinding Wheel on Ground Surface Roughness and Residual Stock Removal of Workpiece

2013 ◽  
Vol 797 ◽  
pp. 522-527
Author(s):  
Taisei Yamada ◽  
Hwa Soo Lee ◽  
Kohichi Miura
Keyword(s):  
Surface Roughness ◽  
Contact Stiffness ◽  
Ground Surface ◽  
Grinding Wheel ◽  
Machining Accuracy ◽  
Grinding Wheels ◽  
Residual Stock ◽  
Grinding Operations ◽  
Stock Removal ◽  
Ground Surface Roughness

In the grinding operation, grinding wheels are deformed by grinding forces, so that residual stock removal of the workpiece takes place. Since this residual stock removal of the workpiece causes low machining efficiency and deterioration of machining accuracy, high hardness grinding wheels may be selected in order to obtain high machining efficiency and/or high quality machining accuracy. On the other hand, when grinding operations used by low hardness grinding wheels are carried out, it is well known that ground surface roughness is smaller than in case of higher hardness grinding wheels. From such a viewpoint, this study aims to investigate experimentally the effect of the contact stiffness of grinding wheel on the ground surface roughness and the residual stock removal of the workpiece. Grinding operations were carried out using three grinding wheels which are different hardness type, and ground surface roughness and residual stock removal of the workpiece were measured. The contact stiffness of grinding wheel was calculated by a support stiffness of single abrasive grain and a contact area between grinding wheel and workpiece. Comparing the contact stiffness of grinding wheel with the ground surface roughness and the residual stock removal of the workpiece, it was known that ground surface roughness increases and residual stock removal of workpiece decreases with increaseing the contact stiffness of grinding wheel. From these results, since elastic deformation of the grinding wheel changed depending on the suppot stiffness of single abrasive grain, it was clarified that the ground surface roughness and the residual stock removal of the workpiece were changed by the contact stiffness of grinding wheel.

scholarly journals Wheel Wear Related Instability in Grinding of Quartz Glass

2021 ◽  
Author(s):  
Yonghao Wang ◽  
Ping Zhou ◽  
Yuhang Pan ◽  
Ying Yan ◽  
Dongming Guo
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Chip Thickness ◽  
Ground Surface ◽  
Grinding Force ◽  
Grinding Wheel ◽  
Wheel Wear ◽  
Undeformed Chip Thickness ◽  
Grinding Wheel Wear ◽  
Ground Surface Roughness

Abstract Grinding is a popular method for producing high-quality parts made of hard and brittle materials. A lot of researchers have focused on the impact of grinding parameters on surface quality. However, only a few studies discussed the surface quality instability caused by the grinding wheel wear during a long grinding process. In this paper, through wheel state monitoring and surface quality testing of ground samples, it is found that the relationship between ground surface roughness and theoretical undeformed chip thickness is significantly affected by the grinding wheel wear state, rather than maintain steady as described in most available models. By introducing the normal grinding force, a linearly relationship was found among normal grinding force, undeformed chip thickness and ground surface roughness. Besides, sensitivity analysis was conducted to guide the parameter adjustment to maintain the stability of ground surface roughness and grinding state. The mechanism of the effect of wheel wear on normal grinding force was also studied in detail. This study will help to further understand the mechanism of the influence of wheel wear on the grinding stability.

Calculation of Effective Ground Depth of Cut by Means of Grinding Process Model

2011 ◽  
Vol 496 ◽  
pp. 7-12 ◽  
Author(s):  
Takazo Yamada ◽  
Michael N. Morgan ◽  
Hwa Soo Lee ◽  
Kohichi Miura
Keyword(s):  
Process Model ◽  
Ground Surface ◽  
Depth Of Cut ◽  
Grinding Wheel ◽  
Grinding Process ◽  
Wheel Wear ◽  
Elastic Deformations ◽  
Proposed Model ◽  
Effective Depth ◽  
Grinding Machine

In order to obtain the effective depth of cut on the ground surface, a new grinding process model taking into account thermal expansions of the grinding wheel and the workpiece, elastic deformations of the grinding machine, the grinding wheel and the workpiece and the wheel wear was proposed. Using proposed model, the effective depth of cut was calculated using measured results of the applied depth of cut and the normal grinding force.

Sign in / Sign up

Export Citation Format

Share Document