Characterization of Lanthanum Nitrate Modified CaMgZn Mixed Oxide Catalysts for Synthesis of Biodiesel

2012 ◽  
Vol 581-582 ◽  
pp. 283-286
Author(s):  
Xue Li ◽  
Zi Yuan Zhou ◽  
Li Wei Zhu ◽  
Jian Xin Jiang
Keyword(s):  
Mixed Oxide ◽  
Lanthanum Nitrate ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Commercial Application ◽  
X Ray Diffraction ◽  
Mixed Oxide Catalysts ◽  
Biodiesel Synthesis ◽  
Glycerol Yield ◽  
Optimized Conditions

CaMgZn mixed oxide (CMZ) catalysts were modified by addition of lanthanum nitrate, and the use of modified catalysts (CMZL) for biodiesel synthesis were investigated. The conditions of biodiesel production with modified catalysts were optimized. Using optimized conditions, including lanthanum nitrate addition of 3wt.%, catalyst amount of 5wt.%, reaction temperature of 50°C, methanol to oil molar ratio of 15:1 and reaction time of 1h, the glycerol yield of 86.80% catalyzed by CMZL could be attained, which was higher compared with the CMZ catalyzed process of 82.94%. Brunauer–Emmett–Teller (BET), X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) were used to compare the modified CMZL catalyst with the CMZ bare catalyst. The results indicated that the lanthanum modified catalysts (CMZL) have excellent surface property. The modified catalysts could be suitable for commercial application.

scholarly journals Biodiesel production from cotton oil using heterogeneous CaO catalysts from eggshells prepared at different calcination temperatures

2019 ◽  
Vol 8 (1) ◽  
pp. 235-244 ◽  
Author(s):  
Luciene da Silva Castro ◽  
Audrei Giménez Barañano ◽  
Christiano Jorge Gomes Pinheiro ◽  
Luciano Menini ◽  
Patrícia Fontes Pinheiro
Keyword(s):  
Cation Exchange Resin ◽  
Weight Ratio ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcination Temperatures ◽  
Biodiesel Synthesis ◽  
Biodiesel Quality ◽  
Cotton Oil

Abstract Biodiesel is a fuel from vegetable oil or animal fat, and is a promising substitute for petroleum-derived diesel. Transesterification is the most widely used method in biodiesel production. Eggshell is rich in calcium carbonate (CaCO3), and when it is subjected to heat treatment it results in calcium oxide (CaO). CaO from eggshells was prepared at different calcination temperatures, and characterized by X-ray diffraction, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The obtained CaO was used as a catalyst. All catalysts showed good stability and excellent morphology for biodiesel synthesis. Catalytic activity was evaluated by the methyl transesterification reaction of cotton oil for 3 h, 9:1 methanol:oil molar ratio, 3 wt% (catalyst/oil weight ratio) catalyst and 60°C. Biodiesels showed an ester content of 97.83%, 97.23% and 98.08%, obtained from calcined eggshell at 800°C, 900°C and 1000°C, respectively. Biodiesel quality was affected by the acidity of the cation exchange resin. The kinematic viscosity of biodiesel was in accordance with specification, except for the biodiesel obtained from the calcined catalyst at 1000°C. The CaO from eggshells obtained at different calcination temperatures is promising for biodiesel synthesis.

scholarly journals Novel Solid Base Catalyst Derived from Drinking Water Defluoridation for Biodiesel Synthesis

2017 ◽  
Vol 61 (4) ◽  
pp. 288 ◽  
Author(s):  
Jharna Gupta ◽  
Madhu Agarwal ◽  
Ajay Kumar Dalai
Keyword(s):  
Drinking Water ◽  
Heterogeneous Catalyst ◽  
Drinking Water Treatment ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Solid Base ◽  
X Ray Diffraction ◽  
Exchange Method ◽  
Biodiesel Synthesis

In this study, a novel heterogeneous catalyst was synthesized from drinking water treatment sludge obtained during defluoridation in biodiesel production by transesterification. More specifically, the sludge was converted into an effective catalyst by calcination at 950 ºC for 3 h. The catalyst was characterized using X-ray diffraction, Fourier transform infrared spectroscopy, Thermogravimetric analysis, Scanning electron microscopy, Hammett titration method, and ion exchange method. The catalyst had a basicity of 12.57 mmol/g and a basic strength of 9.8 < H <17.2. It showed good catalytic activity in biodiesel synthesis. The maximum biodiesel yield obtained was 89% for the following reaction conditions: catalyst loading of 4 wt%, a reaction temperature of 65 ºC, the methanol-to-oil molar ratio of 12:1, and reaction time of 3 h. Thus, it was found that harmful waste can be used as an effective solid base heterogeneous catalyst.

scholarly journals Performance of novel dielectric barrier discharge reactor for biodiesel production from palm oil and ethanol

2018 ◽  
Vol 67 ◽  
pp. 02010 ◽  
Author(s):  
Sari Dafinah Ramadhani ◽  
Saphira Nurina Fakhri ◽  
Setijo Bismo
Keyword(s):  
Palm Oil ◽  
Performance Test ◽  
Plasma Reactor ◽  
Operating Conditions ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Synthesis Methods ◽  
Dbd Plasma ◽  
Spiral Coil ◽  
Biodiesel Synthesis

The disadvantages of conventional biodiesel synthesis trigger the birth of new biodiesel synthesis methods using the DBD plasma reactor. The conventional methods with homogeneous and heterogeneous catalysts have significant constraints that the formation of glycerol compounds in large enough quantities that require considerable energy. The aim of present experiment is to design DBD non-thermal plasma reactor coaxial pipe type and to do its performance test in converting biodiesel The feed stock used are palm oil, ethanol, and argon gas as plasma carrier. Such a chemical reactor, this plasma reactor is also influenced by reaction kinetics and hydrodynamic factors. From this research, it can be seen that the optimum feed and gas flowrate being operated is 1.64 and 41.67 mL/s. The plasma reactor is used in the form of a quartz glass tube surrounded by a SS-314 spiral coil as an outer electrode. The applied operating conditions are 1 : 1 molar ratio of methanol/oil, ambient temperature of 28 - 30 °C, and pressure 1 bar. From this performance test, it is found that this plasma reactor can be used to synthesize biodiesel from palm oil and methanol without catalyst, no formation of soap, and minimal byproducts.

scholarly journals Evaluation of Shell-Derived Calcium Oxide Catalysts for the Production of Biodiesel Esters from Cooking Oils

2021 ◽  
pp. 20-27
Author(s):  
Ngee Sing Chong ◽  
Francis Uchenna Okejiri ◽  
Saidi Abdulramoni ◽  
Shruthi Perna ◽  
Beng Guat Ooi
Keyword(s):  
Calcium Oxide ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
X Ray ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Cooking Oils ◽  
The Cost ◽  
Percentage Conversion

Due to the high cost of feedstock and catalyst in biodiesel production, the viability of the biodiesel industry has been dependent on government subsidies or tax incentives. In order to reduce the cost of production, food wastes including eggshells and oyster shells have been used to prepare calcium oxide (CaO) catalysts for the transesterification reaction of biodiesel synthesis. The shells were calcined at 1000 °C for 4 hours to obtain CaO powders which were investigated as catalysts for the transesterification of waste cooking oil. The catalysts were characterized by Fourier Transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and X-ray fluorescence (XRF) spectroscopy. Reaction parameters such as methanol-to-oil molar ratio, CaO catalyst concentration, and reaction time were evaluated and optimized for the percentage conversion of cooking oil to biodiesel esters. The oyster-based CaO showed better catalytic activity when compared to the eggshell-based CaO under the same set of reaction conditions.

scholarly journals Effect of Mg/Al molar ratio on the basicity of Mg-Al mixed oxide derived from Mg-Al hydrotalcite

2020 ◽  
Vol 10 (6) ◽  
pp. 625
Author(s):  
Said Arhzaf ◽  
Mohammed Naciri Bennani ◽  
Sadik Abouarnadasse ◽  
Hamid Ziyat ◽  
Omar Qabaqous
Keyword(s):  
Thermal Analysis ◽  
Mixed Oxide ◽  
Mixed Oxides ◽  
Molar Ratio ◽  
Acid Molecule ◽  
X Ray Diffraction ◽  
Phenol Adsorption ◽  
X Ray ◽  
Maximum Quantity ◽  
Uv Visible

<p>The fundamental character of the Mg-Al mixed oxide (Mg<sub>n</sub>(Al)O), derived from the Mg-Al hydrotalcite (Mg<sub>n</sub>Al-CO<sub>3</sub>-HT), where n corresponds to the Mg/Al molar ratio (n: 2, 2.5, 3, 3.5 and 4), was studied by using the adsorption of phenol as a probe acid molecule. The hydrotalcite precursors were prepared by the coprecipitation method. Their derived mixed oxides were obtained by thermal treatment at 450°C in a flow of air. The resulting solids were characterized by X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), infrared spectroscopy (FTIR), thermogravimetric and differential thermal analysis             (TG-DTA), nitrogen physisorption (BET) and phenol chemisorption. The phenol adsorption followed by UV-Visible spectrophotometry shows that the basicity increases with the Mg/Al molar ratio, such that maximum quantity of phenol adsorbed (Q<sub>ads</sub> = 0.54 mmol/g <sub>cat</sub>) was obtained with the mixed oxide derived from the Mg-Al hydrotalcite of Mg/Al molar ratio equal to 3.5.</p>

scholarly journals Lipase NS81006 immobilized on Fe3O4 magnetic nanoparticles for biodiesel production

2016 ◽  
Vol 27 (1) ◽  
pp. 13-21 ◽  
Author(s):  
Baskar Thangaraj ◽  
Zhaohua Jia ◽  
Lingmei Dai ◽  
Dehua Liu ◽  
Wei Du
Keyword(s):  
Magnetic Nanoparticles ◽  
Immobilized Lipase ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Fe3o4 Magnetic Nanoparticles ◽  
Time Duration ◽  
Fast Reaction ◽  
Functionalized Magnetic Nanoparticles ◽  
Optimized Conditions ◽  
Free Lipase

Abstract Lipase-catalyzed biodiesel production is being the object of extensive research due to the demerits of chemical based catalytic system. Lipase immobilized on Fe3O4 magnetic nanoparticles has the integrated advantages of traditional immobilized lipase and free lipase for its rather fast reaction rate and easy separation. It has been demonstrated that free lipase NS81006 has potential in catalyzing the alcoholysis of renewable oils for biodiesel preparation. In this study, Fe3O4 magnetic nanoparticles functionalized with organosilane compounds like (3-aminopropyl)triethyloxysilane (APTES) and (3-mercaptopropyl)trimethoxysilane) MPTMS were used as carriers for lipase immobilization. Lipase NS81006 was covalently bound to the organosilane-functionalized magnetic nanoparticles by using glutaraldehyde cross-linking reagent. A biodiesel yield of 89% and 81% could be achieved by lipase immobilized on APTES-Fe3O4 and MPTMS-Fe3O4 magnetic nanoparticles respectively under optimized conditions of oil to methanol molar ratio 1:3 with three step addition of methanol, reaction temperature 45°C and reaction time duration 12 h. The lipases immobilized on magnetic nanoparticles could be recovered easily by external magnetic field for further use.

scholarly journals Flow-mode biodiesel production from palm oil using a pressurized microwave reactor

2019 ◽  
Vol 8 (1) ◽  
pp. 8-14 ◽  
Author(s):  
Seyed Mohammad Safieddin Ardebili ◽  
Xinyu Ge ◽  
Giancarlo Cravotto
Keyword(s):  
Palm Oil ◽  
Irradiation Time ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Flow Mode ◽  
Reaction Conditions ◽  
Surface Method ◽  
Optimized Conditions ◽  
Reactor Pressure ◽  
Palm Oil Biodiesel

Abstract The factors that influence microwave-assisted biodiesel production reactions have been analyzed in this investigation. The studied parameters included microwave (MW) power, irradiation time, and reactor pressure. The response surface method was used to optimize the reaction conditions. The conversion for the 6:1 methanol/oil molar ratio and 1% catalyst ranged from 68.4% to 96.71%. The optimized conditions were found to be 138 s of MW irradiation at 780 W and 7 bar pressure. The conversion at this point was 97.82%. Biodiesel yield increased at higher radiation times (90–130 s) and pressures (5–7 bar). Results show that MW power and irradiation time have significant effects at the 1% level, whereas pressure had significant effects at the 5% level on biodiesel production in this range. The major properties of the palm oil biodiesel produced herein have met the requirements of the EN 14214 methyl ester standard.

Biodiesel fuel synthesis by interesterification of triglycerides with carboxylate esters of low molecular weight

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Egle Sendzikiene ◽  
Violeta Makareviciene
Keyword(s):  
Molecular Weight ◽  
Raw Materials ◽  
Fatty Acid Esters ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Transport Sector ◽  
Biodiesel Fuel ◽  
Low Molecular Weight ◽  
Raw Glycerol ◽  
Biodiesel Synthesis

Abstract The ever-increasing environmental pollution from greenhouse gases motivates the search for methods to reduce it. One such method is the use of biodiesel fuels in the transport sector. Conventional biodiesel production generates up to 10% of a by-product, raw glycerol, whose amount continues to increase as biodiesel production volumes expand, but its demand remains limited. Recently, options have been analysed to replace the triglyceride transesterification process generally used in biodiesel production with an interesterification process that does not generate raw glycerol, instead yielding triacylglycerol that can be directly used as fuel for diesel engines by mixing with fatty acid esters. Additionally, triacylglycerol improves the low-temperature properties of fuel. The present article discusses triglyceride interesterification processes using various carboxylate esters of low molecular weight. Information is provided on raw materials that can be subjected to interesterification for biodiesel synthesis. The possible applications of chemical and enzymatic catalysis for triglyceride interesterification are discussed, and the influence of the catalyst amount, molar ratio of reactants, temperature and process duration on the effectiveness of interesterification is examined. The conditions and effectiveness of noncatalytic interesterification are also discussed in the article. Qualitative indicators of the products obtained and their conformity to the requirements of the European standard for biodiesel fuel are discussed.

Biodiesel Production From Crude Rubber Seed Oil Using Supercritical Methanol Transesterification

2015 ◽  
Vol 781 ◽  
pp. 655-658 ◽  
Author(s):  
Thakun Sawiwat ◽  
Somjai Kajorncheappunngam
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Supercritical Methanol ◽  
Rubber Seed Oil ◽  
Promising Alternative ◽  
Rubber Seed ◽  
Biodiesel Synthesis

Synthesis of biodiesel from rubber seed oil using a supercritical methanol was investigated under various reaction conditions (220 - 300°C, 80 - 180 bar) with reaction time of 1-15 min and oil:methanol molar ratio of 1:20 - 1:60. Free fatty acid methyl esters (FAMEs) content were analyzed by gas chromatography-mass spectroscopy (GC-MS). Most properties of produced biodiesel were in good agreement with biodiesel standard (EN 14214). The maximum FAME yield of 86.90% was obtained at 260°C, 160 bar, 5 min reaction time using oil:methanol molar ratio of 1:40. The result showed the acid value of rubber seed oil decreased to 0.58 mgKOH/g from initial 24 mgKOH/g to. It could be concluded from this findings that crude rubber seed oil is a promising alternative raw material for biodiesel synthesis via supercritical methanol tranesterification.

scholarly journals Selective oxidation of isobutane on V-Mo-O mixed oxide catalysts

2008 ◽  
Vol 73 (1) ◽  
pp. 55-64 ◽  
Author(s):  
Gheorghita Mitran ◽  
Ioan-Cezar Marcu ◽  
Tatiana Yuzhakova ◽  
Ioan Sandulescu
Keyword(s):  
Selective Oxidation ◽  
Mixed Oxide ◽  
Atmospheric Pressure ◽  
Contact Time ◽  
Molar Ratio ◽  
Mixed Metal Oxides ◽  
High Carbon ◽  
Carbon Oxides ◽  
Mixed Oxide Catalysts ◽  
Effects Of Temperature

Four V-Mo-O mixed metal oxides were prepared, characterized and tested for the selective oxidation of isobutane in the temperature range 350-550?C, at atmospheric pressure. Isobutane was mainly oxidized to isobutene and carbon oxides. The systems with low vanadium contents showed low activities but high isobutene selectivities, while the systems with high vanadium contents showed high activities with high carbon oxides selectivities. The effects of temperature, contact time and the molar ratio iso-butane to oxygen on the conversion of isobutane and the selectivity of the oxidation were studied.

Sign in / Sign up

Export Citation Format

Share Document