Migration and Storage Mechanisms of CO2 with Different Injection Rates

2012 ◽  
Vol 588-589 ◽  
pp. 15-20 ◽  
Author(s):  
Gao Fan Yue ◽  
Hai Long Tian ◽  
Tian Fu Xu ◽  
Fu Gang Wang
Keyword(s):  
Greenhouse Effect ◽  
Migration Velocity ◽  
Injection Rate ◽  
Injection Well ◽  
Geological Sequestration ◽  
Sequestration Of Co2 ◽  
And Storage ◽  
Injection Rates

Geological sequestration of CO2 in deep saline formations has been considered as an effective way to mitigate the greenhouse effect. With different rates of injection to a storage formation, the migration and storage mechanisms of CO2 are different. In this paper, we simulated the migration of CO2 based on a generic geological reservoir under simplified conditions. The results show that higher injection rate will lead to higher migration velocity and farther distance from the injection well, while it has no influence on dissolution amount when the total amounts of injected CO2 are equal.

CALCULATION OF OPTIMAL INJECTION RATE FOR DISPERSED WATERFLOODING SYSTEM

2017 ◽  
pp. 63-67
Author(s):  
L. A. Vaganov ◽  
A. Yu. Sencov ◽  
A. A. Ankudinov ◽  
N. S. Polyakova
Keyword(s):  
Injection Rate ◽  
Oil Field ◽  
Injection Well ◽  
Water Migration ◽  
Mutual Location ◽  
Optimal Injection ◽  
Technical Measures ◽  
Injection Rates

The article presents a description of the settlement method of necessary injection rates calculation, which is depended on the injected water migration into the surrounding wells and their mutual location. On the basis of the settlement method the targeted program of geological and technical measures for regulating the work of the injection well stock was created and implemented by the example of the BV7 formation of the Uzhno-Vyintoiskoe oil field.

scholarly journals Capillary processes increase salt precipitation during CO2 injection in saline formations

2018 ◽  
Vol 852 ◽  
pp. 398-421
Author(s):  
Helena L. Kelly ◽  
Simon A. Mathias
Keyword(s):  
High Salinity ◽  
Volume Fraction ◽  
Injection Rate ◽  
Injection Well ◽  
Co2 Injection ◽  
Salt Precipitation ◽  
Injection Wells ◽  
Tenfold Increase ◽  
Entry Pressure ◽  
Injection Rates

An important attraction of saline formations for CO2 storage is that their high salinity renders their associated brine unlikely to be identified as a potential water resource in the future. However, high salinity can lead to dissolved salt precipitating around injection wells, resulting in loss of injectivity and well deterioration. Earlier numerical simulations have revealed that salt precipitation becomes more problematic at lower injection rates. This article presents a new similarity solution, which is used to study the relationship between capillary pressure and salt precipitation around CO2 injection wells in saline formations. Mathematical analysis reveals that the process is strongly controlled by a dimensionless capillary number, which represents the ratio of the CO2 injection rate to the product of the CO2 mobility and air-entry pressure of the porous medium. Low injection rates lead to low capillary numbers, which in turn are found to lead to large volume fractions of precipitated salt around the injection well. For one example studied, reducing the CO2 injection rate by 94 % led to a tenfold increase in the volume fraction of precipitated salt around the injection well.

Geoengineering and Economic Assessment of a Potential Carbon Capture and Storage Site in Southeast Queensland, Australia

2009 ◽  
Vol 12 (05) ◽  
pp. 660-670 ◽  
Author(s):  
Yildiray Cinar ◽  
Peter R. Neal ◽  
William G. Allinson ◽  
Jacques Sayers
Keyword(s):  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Injection Well ◽  
Reservoir Engineering ◽  
Co2 Injection ◽  
Storage Site ◽  
Fracture Gradient ◽  
And Storage ◽  
Southeast Queensland ◽  
Injection Rates

Summary This paper presents geoengineering and economic sensitivity analyses and assessments of the Wunger Ridge flank carbon capture and storage (CCS) site. Both geoengineering and economics are needed to derive the number of wells required to inject a certain amount of CO2 for a given period. A numerical reservoir simulation examines injection rates ranging from 0.5 to 1.5 million tonnes of CO2 year for 25 years of injection. Primary factors affecting the ability to inject CO2 include permeability, formation fracture gradient, aquifer strength, and multiphase flow functions. Secondary factors include the solubility of CO2 in the formation brine, injection well location with respect to the flow barriers/low-permeability aquifers, model geometry including faults, grid size and refinement, and injection well type. Less significant factors include hydrodynamic effects. The economics are assessed using an internally developed technoeconomic model. The model optimizes the CO2 injection cost on the basis of geoengineering data and recent equipment costs. The overall costs depend on the initial costs of CO2 separation and source-to-sink distances and their associated pipeline costs. Secondary cost variations are highly dependent on fracture gradient, permeability, and CO2 injection rates. Depending on the injection characteristics, the specific cost of CO2 avoided is between AUS 62 and 80 per tonne. Introduction Australia's fossil-fuel fired power plants emit 194 million tonnes of CO2 each year (Mt CO2/yr), and approximately 26 Mt/yr of this comes from southeast Queensland. A multidisciplinary study has recently identified the onshore Bowen basin as having potential for geological storage of CO2 (Sayers et al. 2006a). In that paper, geological containment and injectivity and reservoir engineering simulation sensitivities showed that a target injection rate of 1.2 Mt CO2/yr over a 25-year project life span could be achieved (i.e., equivalent to injecting the emissions from a 400 MW gas based power station). This study further examines reservoir engineering and economics sensitivities.

Successful Development and Deployment of a Novel Chemical Package for Stimulation of Injection wells, Offshore UK

2021 ◽  
Author(s):  
Dennis Alexis ◽  
Gayani Pinnawala ◽  
Do Hoon Kim ◽  
Varadarajan Dwarakanath ◽  
Ruth Hahn ◽  
...  
Keyword(s):  
Product Quality ◽  
Injection Well ◽  
Concentrated Solutions ◽  
Successful Development ◽  
Injection Wells ◽  
Polymer Injection ◽  
Remediation Process ◽  
Field Location ◽  
Stimulation Of ◽  
Injection Rates

Abstract The work described in this paper details the development of a single stimulation package that was successfully used for treating an offshore horizontal polymer injection well to improve near wellbore injectivity in the Captain field, offshore UK. The practice was to pump these concentrated surfactant streams using multiple pumps from a stimulation vessel which is diluted with the polymer injection stream in the platform to be injected downhole. The operational challenges were maintaining steady injection rates of the different liquid streams which was exacerbated by the viscous nature of the concentrated surfactants that would require pre-dilution using cosolvent or heating the concentrated solutions before pumping to make them flowable. We have developed a single, concentrated liquid blend of surfactant, polymer and cosolvent that was used in near-wellbore remediation. This approach significantly simplifies the chemical remediation process in the field while also ensuring consistent product quality and efficiency. The developed single package is multiphase, multicomponent in nature that can be readily pumped. This blend was formulated based on the previous stimulation experience where concentrated surfactant packages were confirmed to work. Commercial blending of the single package was carried out based on lab scale to yard scale blending and dilution studies. About 420 MT of the blend was manufactured, stored, and transported by rail, road and offshore stimulation vessel to the field location and successfully injected.

scholarly journals Solar Tower Power Plants of Molten Salt External Receivers in Algeria: Analysis of Direct Normal Irradiation on Performance

2018 ◽  
Vol 8 (8) ◽  
pp. 1221 ◽  
Author(s):  
Abdelkader Rouibah ◽  
Djamel Benazzouz ◽  
Rahmani Kouider ◽  
Awf Al-Kassir ◽  
Justo García-Sanz-Calcedo ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Storage ◽  
Thermal Energy ◽  
Greenhouse Effect ◽  
Energy Production ◽  
Power Plants ◽  
Storage Capacity ◽  
Real Data ◽  
Multiple Power ◽  
And Storage

The increase of solar energy production has become a solution to meet the demand of electricity and reduce the greenhouse effect worldwide. This paper aims to determine the performance and viability of direct normal irradiation of three solar tower power plants in Algeria, to be installed in the highlands and the Sahara (Béchar, El Oued, and Djelfa regions). The performance of the plants was obtained through a system advisor model simulator. It used real data gathered from appropriate meteorological files. A relationship between the solar multiple (SM), power generation, and thermal energy storage (TES) hours was observed. The results showed that the optimal heliostat field corresponds to 1.8 SM and 2 TES hours in Béchar, 1.2 SM and 2 TES hours for El Oued, and 1.5 SM and 4 TES hours for Djelfa. This study shows that there is an interesting relationship between the solar multiple, power generation, and storage capacity.

scholarly journals Global warming solutions: Carbon capture and storage

2021 ◽  
Vol 308 ◽  
pp. 01024
Author(s):  
Hengyang Fei ◽  
Chaoyue Zhang
Keyword(s):  
Global Warming ◽  
Greenhouse Effect ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Severe Problem ◽  
And Storage

Global warming (GW) is a severe problem that needs to be resolved, but how can scientists contribute to this issue? Carbon capture and storage (CCS) technology is a way of reducing the enhanced greenhouse effect. Here, we introduce two methods of CCS technology, including corresponding scientific proofs for each one being viable, the merits and demerits of each measure. Moreover, there are oppositions against the implementation of CCS projects. We also summarize some perspectives and possible solutions for societal opposition against CCS projects. This review will enhance the understanding of the strategies of CCS and the solutions of GW.

An Integrated IR4.0 Software Enables Autonomous Casing Crossflow Rate Calculation

2021 ◽  
Author(s):  
Nasser M. Al-Hajri ◽  
Akram R. Barghouti ◽  
Sulaiman T. Ureiga
Keyword(s):  
Industrial Revolution ◽  
Water Injection ◽  
Flow Characteristics ◽  
Injection Rate ◽  
Performance Model ◽  
Injection Well ◽  
Production Model ◽  
Well Performance ◽  
Secondary Formation ◽  
Well Model

Abstract This paper will present an alternative calculation technique to predict wellbore crossflow rate in a water injection well resulting from a casing leak. The method provides a self-governing process for wellbore related calculations inspired by the fourth industrial revolution technologies. In an earlier work, calculations techniques were presented which do not require the conventional use of downhole flowmeter (spinner) to obtain the flow rate. Rather, continuous surface injection data prior to crossflow development and shut-in well are used to estimate the rate. In this alternative methodology, surface injection data post crossflow development are factored in to calculate the rate with the same accuracy. To illustrate the process an example water injector well is used. To quantify the casing leak crossflow rate, the following calculation methodology was applied:Generate a well performance model using pre-crossflow injection data. Normal modeling techniques are applied in this step to obtain an accurate model for the injection well as a baseline case.Generate an imaginary injection well model: An injection well mimicking the flow characteristics and properties of the water injector is envisioned to simulate crossflow at flowing (injecting) conditions. In this step, we simulate an injector that has total depth up to the crossflow location only and not the total depth of the example water well.Generate the performance model for the secondary formation using post crossflow data: The total injection rate measured at surface has two portions: one portion goes into the shallower secondary formation and another goes into the deeper (primary) formation. The modeling inputs from the first two steps will be used here to obtain the rate for the downhole formation at crossflow conditions.Generate an imaginary production well model: The normal model for the water injector will be inversed to obtain a production model instead. The inputs from previous steps will be incorporated in the inverse modeling.Obtaining the crossflow rate at shut-in conditions: Performance curves generated from step 3 & 4 will be plotted together to obtain an intersection that corresponds to the crossflow rate at shut-in conditions. This numerical methodology was analytically derived and the prediction results were verified on syntactic field data with very high accuracy. The application of this model will benefit oil operators by avoiding wireline logging costs and associated safety risks with mechanical intervention.

Sign in / Sign up

Export Citation Format

Share Document