Modeling of Performance of Single Elastic Capsule in Time-Dependent Two-Dimensional Microchannel Flow

2009 ◽  
Vol 74 ◽  
pp. 143-146
Author(s):  
Gang Ma ◽  
Hua Li ◽  
Teng Yong Ng
Keyword(s):  
Fluid Velocity ◽  
Simulation Method ◽  
Time Dependent ◽  
Two Dimensional ◽  
Microchannel Flow ◽  
Membrane Mechanics ◽  
Linear Elastic ◽  
Microscale Flow ◽  
Agricultural Industries ◽  
Volume Method

The mechanical behavior of capsule in microscale flow is fundamentally important in physiology, pharmaceutical or agricultural industries, fluid mechanics and physics. In the present paper, the performance of two-dimensional capsule in time-dependent microchannel flow is investigated by a numerical simulation method, which combines the finite volume method for solving the fluid problem with the front tracking technique for capturing and tracking the capsule membrane. Initially circular capsule is considered in the simulations, and the capsule is modeled as liquid medium enclosed by a thin membrane, for which linear elastic properties are taken into consideration. The membrane mechanics is adopted to calculate membrane-fluid interaction, based on which the solution of fluid problem is obtained. The capsule membrane is advected explicitly according to fluid velocity results. Results of capsule position, capsule moving velocity, capsule shape, velocity field of fluid inside and outside the membrane can be obtained from the numerical simulations. Based on these results, the effects of time-dependent background fluid on capsule behavior are studied.

Numerical analysis and explore of asymmetrical fluid flow in a two-sided lid-driven cavity

2020 ◽  
Vol 14 (3) ◽  
pp. 7269-7281
Author(s):  
El Amin Azzouz ◽  
Samir Houat
Keyword(s):  
Velocity Ratio ◽  
Two Dimensional ◽  
Lower Side ◽  
Square Cavity ◽  
Driven Cavity ◽  
Parallel Motion ◽  
Bottom Cavity ◽  
Secondary Vortices ◽  
Volume Method ◽  
Fluid Characteristics

The two-dimensional asymmetrical flow in a two-sided lid-driven square cavity is numerically analyzed by the finite volume method (FVM). The top and bottom walls slide in parallel and antiparallel motions with various velocity ratio (UT/Ub=λ) where |λ|=2, 4, 8, and 10. In this study, the Reynolds number Re1 = 200, 400, 800 and 1000 is applied for the upper side and Re2 = 100 constant on the lower side. The numerical results are presented in terms of streamlines, vorticity contours and velocity profiles. These results reveal the effect of varying the velocity ratio and consequently the Reynolds ratio on the flow behaviour and fluid characteristics inside the cavity. Unlike conventional symmetrical driven flows, asymmetrical flow patterns and velocity distributions distinct the bulk of the cavity with the rising Reynolds ratio. For λ>2, in addition to the main vortex, the parallel motion of the walls induces two secondary vortices near the bottom cavity corners. however, the antiparallel motion generates two secondary vortices on the bottom right corner. The parallel flow proves affected considerably compared to the antiparallel flow.

scholarly journals Integrable unsteady motion with an application to ocean eddies

1998 ◽  
Vol 5 (3) ◽  
pp. 145-151
Author(s):  
A. D. Kirwan, Jr. ◽  
B. L. Lipphardt, Jr.
Keyword(s):  
Potential Vorticity ◽  
Particle Motion ◽  
Gulf Stream ◽  
Incompressible Flows ◽  
Unsteady Motion ◽  
Ring System ◽  
Time Dependent ◽  
Two Dimensional ◽  
Ocean Eddies ◽  
Multilayered Systems

Abstract. Application of the Brown-Samelson theorem, which shows that particle motion is integrable in a class of vorticity-conserving, two-dimensional incompressible flows, is extended here to a class of explicit time dependent dynamically balanced flows in multilayered systems. Particle motion for nonsteady two-dimensional flows with discontinuities in the vorticity or potential vorticity fields (modon solutions) is shown to be integrable. An example of a two-layer modon solution constrained by observations of a Gulf Stream ring system is discussed.

scholarly journals Effect of an oscillating time-dependent pressure gradient on Dean flow: transient solution

2020 ◽  
Vol 9 (1) ◽  
Author(s):  
Basant K. Jha ◽  
Dauda Gambo
Keyword(s):  
Pressure Gradient ◽  
Initial Conditions ◽  
Fluid Velocity ◽  
Outer Cylinder ◽  
Time Dependent ◽  
Navier Stokes ◽  
Dean Flow ◽  
Continuity Equations ◽  
Riemann Sum ◽  
Flow Formation

Abstract Background Navier-Stokes and continuity equations are utilized to simulate fully developed laminar Dean flow with an oscillating time-dependent pressure gradient. These equations are solved analytically with the appropriate boundary and initial conditions in terms of Laplace domain and inverted to time domain using a numerical inversion technique known as Riemann-Sum Approximation (RSA). The flow is assumed to be triggered by the applied circumferential pressure gradient (azimuthal pressure gradient) and the oscillating time-dependent pressure gradient. The influence of the various flow parameters on the flow formation are depicted graphically. Comparisons with previously established result has been made as a limit case when the frequency of the oscillation is taken as 0 (ω = 0). Results It was revealed that maintaining the frequency of oscillation, the velocity and skin frictions can be made increasing functions of time. An increasing frequency of the oscillating time-dependent pressure gradient and relatively a small amount of time is desirable for a decreasing velocity and skin frictions. The fluid vorticity decreases with further distance towards the outer cylinder as time passes. Conclusion Findings confirm that increasing the frequency of oscillation weakens the fluid velocity and the drag on both walls of the cylinders.

scholarly journals Effect of buried depth on thermal performance of a vertical U-tube underground heat exchanger

Open Physics ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 327-330
Author(s):  
Li Yang ◽  
Bo Zhang ◽  
Jiří Jaromír Klemeš ◽  
Jie Liu ◽  
Meiyu Song ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Fluid Velocity ◽  
Three Dimensional ◽  
Simplified Model ◽  
Two Dimensional ◽  
Construction Sites ◽  
Full Size ◽  
Unit Depth ◽  
Research Show

Abstract Many researchers numerically investigated U-tube underground heat exchanger using a two-dimensional simplified pipe. However, a simplified model results in large errors compared to the data from construction sites. This research is carried out using a three-dimensional full-size model. A model validation is conducted by comparing with experimental data in summer. This article investigates the effects of fluid velocity and buried depth on the heat exchange rate in a vertical U-tube underground heat exchanger based on fluid–structure coupled simulations. Compared with the results at a flow rate of 0.4 m/s, the results of this research show that the heat transfer per buried depth at 1.0 m/s increases by 123.34%. With the increase of the buried depth from 80 to 140 m, the heat transfer per unit depth decreases by 9.72%.

scholarly journals Discontinuous finite volume element method of two-dimensional unsaturated soil water movement problem

2019 ◽  
Vol 2019 (1) ◽  
Author(s):  
Fan Chen ◽  
Zhixiao Xu
Keyword(s):  
Soil Water ◽  
Finite Volume ◽  
Unsaturated Soil ◽  
Water Movement ◽  
Optimal Error Estimate ◽  
Two Dimensional ◽  
Fully Discrete ◽  
Volume Method ◽  
Movement Problem ◽  
Soil Water Movement

AbstractIn this paper, a numerical approximation method for the two-dimensional unsaturated soil water movement problem is established by using the discontinuous finite volume method. We prove the optimal error estimate for the fully discrete format. Finally, the reliability of the method is verified by numerical experiments. This method is not only simple to calculate, but also stable and reliable.

Sign in / Sign up

Export Citation Format

Share Document