The Ventilation and Thermal Performance of the Patio Space in Shanghai Shikumen House

2013 ◽  
Vol 742 ◽  
pp. 8-12
Author(s):  
Xiao Yu Luo ◽  
Jian Ge ◽  
Yi Cai
Keyword(s):  
Mathematical Model ◽  
Thermal Performance ◽  
Simulation Analysis ◽  
Thermal Environment ◽  
Three Dimensional ◽  
Simulation Software ◽  
Wind Environment ◽  
Residential Architecture ◽  
Dimensional Simulation ◽  
The Mathematical Model

Shanghai Shikumen house is a typical one of Chinese traditional residential architecture, which has a "two patios & one corridor" pattern adapting to the climate of Shanghai. In existing researches, most study of the thermal performance dwelling with courtyard is still qualitative. This research constructed the quantitative simulation of the " two patios & one corridor" pattern in Shanghai Shikumen house based on the mathematical model by the technical simulation software, and compared the above mode with the general courtyard house to test the advances of it. First of all, the research conduct a three-dimensional simulation analysis on the "two patios & one corridor" pattern and the general "Two patios" pattern. Then we compared the results of the wind environment of the two modes and found the "two patios & one corridor" mode has advances on ventilation. Secondly, we did thermal environment simulations of the rooms in the above two modes, and compared the analysis results of two modes. We found that the "two patios & one corridor" pattern did better in the room thermal. Finally, we hope this research can provide certain reference for the design of the sustainable residential architecture.

Modeling and Simulation Analysis of the Twist Drill Conical Grinding Method Based on Pro/E Software

2010 ◽  
Vol 160-162 ◽  
pp. 1680-1684
Author(s):  
Xing Jun Gao ◽  
Qing Liu ◽  
Ping Zou ◽  
Jian Song ◽  
Ping Li
Keyword(s):  
Mathematical Model ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Fundamental Principle ◽  
Drilling Process ◽  
Twist Drill ◽  
Three Dimensional Modeling ◽  
Grinding Method ◽  
Dimensional Modeling ◽  
The Mathematical Model

The fundamental principle of the twist drill conical grinding method was introduced. The mathematical model of the twist drill was established. Mathematical model to establish drill bit is the geometric design, manufacture, cutting analysis and modeling on the basis of the drilling process. According to the twist drill grinding principle, using Pro/E the three-dimensional modeling of the twist drill was completed, and the feature of the conical grinding method was analyzed.

Dynamic Simulation Analysis for Docking Mechanism of On-Orbit-Servicing Satellite

2014 ◽  
Vol 487 ◽  
pp. 313-318
Author(s):  
Yuan Zhang ◽  
Jian Wang ◽  
Yan Song ◽  
Li Li Sun
Keyword(s):  
Mathematical Model ◽  
Simulation Analysis ◽  
Initial Conditions ◽  
Euler Method ◽  
Simulation Software ◽  
Dynamics Simulation ◽  
Collision Dynamics ◽  
Docking Mechanism ◽  
Collision Force ◽  
The Mathematical Model

The new type of three jaw docking mechanism is designed for use in orbiting spacecraft, the mathematical model is given and its working characteristics are analyzed. By establishing the mathematical model of the interaction of the parts under the different coordinate system, it is obtained that the corresponding kinematic characteristics; contact collision dynamics model is established by using the Hertz model theory, dynamic equation is established by Newton-Euler method, and simulation analysis are carried out by using the dynamics simulation software ADAMS, through the simulation analysis of three groups with different initial conditions, the results show that it achieve reliable grasp with good performance, it provides the lock claw curve in contact collision force and movement characteristics curve. These curves provide reference to improve the performance of docking mechanism.

Research on cargo-loading optimization based on genetic and fuzzy integration

2021 ◽  
Vol 40 (4) ◽  
pp. 8493-8500
Author(s):  
Yanwei Du ◽  
Feng Chen ◽  
Xiaoyi Fan ◽  
Lei Zhang ◽  
Henggang Liang
Keyword(s):  
Genetic Algorithm ◽  
Mathematical Model ◽  
Three Dimensional ◽  
Distribution Center ◽  
Long Time ◽  
Low Efficiency ◽  
Decision Making Model ◽  
The Mathematical Model ◽  
Loading Scheme

With the increase of the number of loaded goods, the number of optional loading schemes will increase exponentially. It is a long time and low efficiency to determine the loading scheme with experience. Genetic algorithm is a search heuristic algorithm used to solve optimization in the field of computer science artificial intelligence. Genetic algorithm can effectively select the optimal loading scheme but unable to utilize weight and volume capacity of cargo and truck. In this paper, we propose hybrid Genetic and fuzzy logic based cargo-loading decision making model that focus on achieving maximum profit with maximum utilization of weight and volume capacity of cargo and truck. In this paper, first of all, the components of the problem of goods stowage in the distribution center are analyzed systematically, which lays the foundation for the reasonable classification of the problem of goods stowage and the establishment of the mathematical model of the problem of goods stowage. Secondly, the paper abstracts and defines the problem of goods loading in distribution center, establishes the mathematical model for the optimization of single car three-dimensional goods loading, and designs the genetic algorithm for solving the model. Finally, Matlab is used to solve the optimization model of cargo loading, and the good performance of the algorithm is verified by an example. From the performance evaluation analysis, proposed the hybrid system achieve better outcomes than the standard SA model, GA method, and TS strategy.

Application of the Mechanical Impedance of Body Arm Movement Based on the Virtual Tennis System

2013 ◽  
Vol 791-793 ◽  
pp. 1436-1440
Author(s):  
Ling Hang Yang
Keyword(s):  
Virtual Reality ◽  
Three Dimensional ◽  
Arm Movement ◽  
Mechanical Impedance ◽  
Simulation Software ◽  
Computer Hardware ◽  
Calculation Results ◽  
Virtual System ◽  
Dimensional Simulation ◽  
Theoretical Results

With the development of computer hardware and software technology, virtual reality technology of computer has been widely used in various fields. Virtual teaching process is one of the main applications of virtual reality computer technology. Tennis is one of the most common sports. Tennis process mainly includes the process of catching a ball, serving a ball and hitting a ball. Virtual process of tennis system must establish an accurate numerical simulation model to calculate the mechanical impedance during the arm movement of human. According to this, it builds a model of the mechanical impedance of human arm in tennis virtual system using three-dimensional simulation software in this paper and gets the curve of mechanical impedance through the simulation. Finally, the article compares calculation results with the theoretical results and concludes that the theoretical results and simulation results are basically consistent which provide a theoretical reference for the design of the development of virtual system for the human.

Impact of Electric Vehicle Lateral Dynamics on the Battery Pack

2014 ◽  
Vol 590 ◽  
pp. 451-457
Author(s):  
Sen Nan Song ◽  
Fa Chao Jiang ◽  
Hong Shi
Keyword(s):  
Mathematical Model ◽  
Angular Acceleration ◽  
Simulation Software ◽  
The Body ◽  
Battery Pack ◽  
Vehicle Body ◽  
Rolling Motion ◽  
Rolling Angle ◽  
On The Road ◽  
The Mathematical Model

The present work is concerned with the rolling motion of the battery pack when EV travelling on the road. First McPherson suspension system was regarded as the research object with detailed analysis of its structural features and motion characteristics. Establish the mathematical model which could apply to calculating the rolling motion of the vehicle body. Through MATLAB/Simulink simulation software, we could calculate the rolling angle on passive suspension. On this basis, assume that the battery pack mounted on the vehicle body and make it passive connection and PID connection. When the body rolls, the battery pack will produce a certain angle then. Next establish the mathematical model to summarize the relationship between the two variables. Then we set the parameters and calculate the roll angle of battery pack in both cases for comparison. Simulation results show that road irregularities will make battery rotate an angle and PID controller can effectively reduce the angle, especially angular acceleration. This paper put forward a new idea that battery is connected with body by active control on EV, and proves the superiority in reducing the rolling angle.

scholarly journals Research on the Influence of the Distribution Pattern of Building Clusters in Coastal Areas on Wind Environment -Focused on Busan area in Korea

2021 ◽  
Vol 308 ◽  
pp. 02010
Author(s):  
Yang Huimin ◽  
Zhao Shuwen ◽  
Kim Chulsoo
Keyword(s):  
Thermal Environment ◽  
Simulation Software ◽  
Fluid Simulation ◽  
Wind Environment ◽  
Environment Quality ◽  
Ventilation Efficiency ◽  
Urban Thermal Environment ◽  
The City ◽  
Public Environment

With the development of urbanization, the heat island phenomenon has led to further deterioration of the urban thermal environment, resulting in wind environment differences. To study the thermal environment of the city, this paper takes the Busan area in South Korea as the research object and analyzes the connection between the layout of buildings and the wind environment based on the microscopic wind environment characteristics of the coastal area using CFD air-fluid simulation software and suggests that the monsoon influence brought by the coastal currents should be paid attention to, the layout of wind-oriented building groups should be improved, urban air ducts should be established to enhance the ventilation efficiency, and the wind environment of the urban public environment and buildings should be guaranteed. The wind environment quality of urban public environment and indoor environment should be ensured.

Sign in / Sign up

Export Citation Format

Share Document