Polyacrylonitrile-Based Activated Carbon Fiber/SnO2 Composites via Different Synthetic Methods
Polyacrylonitrile-based activated carbon fiber (PAN-ACF)/SnO2 composites were synthesized by sol-gel and in-situ chemical synthesis method, respectively, and characterized by XRD, TGA, and SEM. The electrochemical properties of the resultant composites as negative electrodes in lithium-ion battery were also studied to investage the influence of different synthetic methods on the structure and electrochemical properties of the composites. The results show that the SnO2 in the composites prepared by both methods has a tetragonal rutile structure but the structure and electrochemical properties are different. With the similar composition, the composites prepared by in-situ method have uniform distribution of SnO2 particles, and exhibit better cyclic performance than those made by sol-gel method. The capacity of PAN-ACF/SnO2 composites with SnO2 content of 42.9% prepared by in-situ method remains 401.2 mAh g-1 after 50 charge/discharge cycles at a current density of 50 mAh g-1.