Seismic Evaluation of Base Isolated System Equipped with Shape Memory Alloys

2013 ◽  
Vol 831 ◽  
pp. 110-114
Author(s):  
S. Alvandi ◽  
M. Ghassemieh
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Seismic Isolation ◽  
Passive Control ◽  
Structural Model ◽  
Base Isolation ◽  
Base Shear ◽  
Seismic Evaluation ◽  
Isolation System ◽  
Base Isolation System

Seismic isolation system is an example of passive control system that effectively improves the performance of structures. This research discusses the seismic performance of a elastomeric base isolation system which provide the combined features of vertical load support, horizontal flexibility and energy absorbing capacity, utilizing shape memory alloys that provides re-centering force and additional damping in the system. Also this paper compares the effect of such alloys with memory effect and/or superelasticity (with pre-straining) in base isolated structure. To provide such comparison, a nonlinear structural model has been developed on some benchmark control problems and some health monitoring evaluation criterias are used. The smart base isolation utilizes the different responses of shape memory alloys at several levels of strain to control the displacements of the rubber bearing and base shear at excitation level. Furthermore the proposed based isolation systems has enhanced performance in terms of response reduction and re-centering capacity.

Laminated Type Isolation Device for Light Weight Structure Using Urethane Elastomer

2017 ◽  
Author(s):  
Kengo Goda ◽  
Osamu Furuya ◽  
Kohei Imamura ◽  
Kenta Ishihana
Keyword(s):  
Seismic Isolation ◽  
Base Isolation ◽  
Light Weight ◽  
Loading Test ◽  
Isolation System ◽  
Seismic Safety ◽  
Base Isolation System ◽  
Weight Structure ◽  
Isolation Device ◽  
Urethane Elastomer

At the present, base isolation system has been recognized by general earthquake resistant technique since the Great Hanshin Earthquake 1995. The seismic isolation will be aggressively applied to not only architectural and civil structures but also various structures, because the effectiveness on seismic safety had been demonstrated again in the Great East Japan Earthquake. In generally, although the base isolation system is divided into laminated rubber bearing type and friction sliding bearing type. In the case of former type, shape factor, maximum or minimum outer shapes and so on are restricted by the material characteristics in visco-elastic material. In general, the isolation structure is used in high damping rubber. However, we pay attention to base isolation using urethane elastomer. Urethane elastomer has excellent elasticity, mechanical strength, abrasion resistance, weather resistance, oil resistance, impact resistance the absorbent, anti-vibration and excellent low-temperature properties. Furthermore, it is possible to impart various characteristics by a combination of isocyanate and polyol and chain extender, requires no large-scale apparatus, it has the advantage molecular design is easy. In previous study, the research and development of laminated type base isolation device using urethane elastomer was carried out to upgrade a seismic safety for various structures. The fundamental characteristics was investigated from several loading test by using various experimental devices, and the design formula for the stiffness and equivalent damping coefficient is formulated as an approximate expression of mechanical characteristics until now. It was confirmed that urethane elastomer is not hardening up to 500% shear strain. Moreover, the experimental examination for aged deterioration in the urethane material has been continuously carried out. As the results, it was confirmed that the laminated type seismic isolation device using urethane elastomer is possible to develop as a practicable device from the stable mechanical properties as considering in design step. In this study, the small-scale laminated type base isolation device using urethane elastomer is advanced to the direction of further technical upgrading and of scale down for light-weight structure as a sever rack. The first stage, basic properties of the urethane elastomer has been investigated by loading test. Furthermore, the design equation is created by loading test using urethane elastomer. The validity of the design equation has been confirmed. The second stage, the compression creep test with laminated type base isolation device has been investigated to confirm an effect on light-weight mechanical devices.

Three Dimensional Seismic Isolation System for Next-Generation Nuclear Power Plant With Rolling Seal Type Air Spring and Hydraulic Rocking Suppression System

2005 ◽  
Author(s):  
Takahiro Shimada ◽  
Junji Suhara ◽  
Kazuhiko Inoue
Keyword(s):  
Dynamic Loading ◽  
Nuclear Power ◽  
Seismic Isolation ◽  
Base Isolation ◽  
Three Dimensional ◽  
Loading Test ◽  
Isolation System ◽  
Ability Test ◽  
Base Isolation System ◽  
Suppression System

Three dimensional (3D) seismic isolation devices have been developed to use for the base isolation system of the heavy building like a nuclear reactor building. The developed seismic isolation system is composed of rolling seal type air springs and the hydraulic type springs with rocking suppression system for vertical base isolation device. In horizontal direction, the same laminated rubber bearings are used as horizontal isolation device for these systems. The performances and the applicability have already been evaluated by the technical feasibility tests and performance tests for each system. In this study, it was evaluated that the performance of the 3D base isolation system with rolling seal type air springs combined with hydraulic rocking suppression devices. A 1/7 scaled model of the 3D base isolation devices were manufactured and some performance test were executed for each device. For the rolling seal type air springs, dynamic loading test was executed with a vibration table, and pressure resistant ability test was executed for reinforced air springs. In the dynamic loading test, it is confirmed that the natural period and damping performance were verified. In the pressure resistant ability test, it is confirmed that the air springs had sufficient strength. For the hydraulic rocking suppression system, forced dynamic loading test was carried out in order to measure the frictional and oil flow resistance force on each cylinder. And the vibration table tests were carried out with supported weight of 228 MN in order to evaluate and to confirm the horizontal and vertical isolation performance, rocking suppression performance, and the applicability of the this seismic isolation system as the combined system. 4 rolling seal type air springs and 4 hydraulic load-carrying cylinders with rocking suppression devices supported the weight. As a result, the proposed system was verified that it could be applied to the actual nuclear power plant building to be target.

A study on seismic isolation of building used LRB

2020 ◽  
Vol 6 (2) ◽  
pp. 52
Author(s):  
Muhammet Yurdakul ◽  
Mehmet Burak Yıldız
Keyword(s):  
Seismic Isolation ◽  
Base Isolation ◽  
Dynamic Loads ◽  
Isolation System ◽  
Rubber Bearing ◽  
Lead Rubber Bearing ◽  
Earthquake Design ◽  
Base Isolation System ◽  
Internal Forces ◽  
Storey Building

Base isolation system with lead rubber bearing (LRB) is commonly used to prevent structure against to damage of earthquake. Design of LRB system is detailed in this study. The isolated building with LRB design according to Uniform Building Code (UBC-97) and fixed building were examined. The six-storey building with LRB and fixed building were modelled in SAP2000 with the same dynamic loads. The relative floor displacement and internal forces of the seismic isolated and fixed building are compared. In addition, transverse and longitudinal reinforcement of any axis of seismic isolated and fixed building are compared. Analyse results showed that effectiveness of using seismic isolation system on building. The weight of longitudinal and transverse reinforcement of isolated building is smaller than fixed building about 36%, 40% respectively.

scholarly journals Effects of Shape Memory Alloys on Response of Steel Structural Buildings within Near Field Earthquakes Zone

2020 ◽  
Vol 6 (7) ◽  
pp. 1314-1327
Author(s):  
Mahmoud Ahmadinejad ◽  
Alireza Jafarisirizi ◽  
Reza Rahgozar
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Base Isolation ◽  
Near Field ◽  
Seismic Zone ◽  
Isolation System ◽  
Residual Displacements ◽  
Rubber Bearing ◽  
Laminated Rubber Bearing ◽  
Isolation Systems

Base isolation is one of the effective ways for controlling civil engineering structures in seismic zone which can reduce seismic demand. Also is an efficient passive control mechanism that protects its superstructure during an earthquake. However, residual displacement of base-isolation systems, resulting from strong ground motions, remain as the main obstacle in such system’s serviceability after the earthquake. Shape Memory Alloys (SMA) is amongst the newly introduced smart materials that can undergo large nonlinear deformations with considerable dissipation of energy without having any permanent displacement afterward. This property of SMA may be utilized for designing of base isolation system to increase the structure’s serviceability. Here, a proposed semi-active isolation system combines laminated rubber bearing system with shape memory alloy, to take advantage of SMAs high elastic strain range, in order to reduce residual displacements of the laminated rubber bearing. Merits of the system are demonstrated by comparing it to common laminated rubber bearing isolation systems. It is found that the optimal application of SMAs in base-isolation systems can significantly reduce bearings’ residual displacements. In this study, OpenSees program for a three dimensional six-storey steel frame building has been used by locating the isolators under the columns for investigating the feasibility of smart base isolation systems, i.e., the combination of traditional Laminated Rubber Bearing (LRB) with the SMA, in reducing the structure’s isolated-base response to near field earthquake records are examined. Also, a new configuration of SMAs in conjunction with LRB is considered which make the system easier to operate and maintain.

scholarly journals Seismic Base Isolation System using Scrap Old Tyres

2020 ◽  
Vol 5 (3) ◽  
pp. 85-90
Keyword(s):  
Seismic Isolation ◽  
Structural Engineering ◽  
Base Isolation ◽  
Shock Propagation ◽  
Analysis Tool ◽  
Element Analysis ◽  
Isolation System ◽  
Isolation Technique ◽  
Base Isolation System ◽  
Seismic Vibrations

Enfeebling the effects of vibration caused by the movement of tectonic plates has been the major topic of research in the field of Structural Engineering. Base isolation is a technique used to counteract the effects of seismic vibration and ensuring the safety of the superstructure. Even though, the strategy of base isolation has been used in interminable number of structures, there is a need for economized, effective base isolation technique. India has been recycling and reusing waste tyres for four decades, it is estimated that 60% are disposed of through illegal dumping. India, being the second largest manufacturer of rubber after China, there is a menace of rubber disposal in the country. Despite the numerous efforts of technologists of recycling and utilizing the scrap rubber tyres, 17% of the scrap rubber tyres are diverted to landfill creating disposal problem. Therefore, there is a need for utilizing the used scrap rubber tyres in an innovative way instead of dumping it. Scrap Rubber tyres, being elastic in nature serve to be a potential shock absorber of seismic vibrations. In the present study, an attempt is made to utilize the recycled scrap rubber tyre in seismic isolation of structure. This technique proves to be a low- cost earthquake mitigation technique which can potentially reduce the damage caused by seismic shock propagation into the structure and hence ensure overall safety of the structure. An experimental analysis is done to evaluate the properties of assembly of rubber tyres and utilization of the same for isolating base of structures to check for the effectiveness in enfeebling the shocks produced by seismic vibrations. Furthermore, using the properties of scrap rubber tyres obtained from the experimental results, performance of the scrap tyres as a base isolation system for a multistoried building and stability of the structure was studied using Finite element analysis tool.

Design of Shape Memory Alloy Damper for Base Isolated Structure

1997 ◽  
Author(s):  
Krzysztof Wilde ◽  
Paolo Gardoni ◽  
Yozo Fujino ◽  
Stefano Besseghini
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Base Isolation ◽  
Hysteretic Behavior ◽  
Isolation System ◽  
Rubber Bearing ◽  
Laminated Rubber Bearing ◽  
Base Isolation System ◽  
Rubber Bearings ◽  
Smart Base Isolation

Abstract Base isolation provides a very effective passive method of protecting the structure from the hazards of earthquakes. The proposed isolation system combines the laminated rubber bearing with the device made of shape memory alloy (SMA). The smart base isolation uses hysteretic behavior of SMA to increase the structural damping of the structure and utilizes the different responses of the SMA at different levels of strain to control the displacements of the base isolation system at various excitation levels. The performance of the smart base isolation is compared with the performance of isolation by laminated rubber bearings to assess the benefits of additional SMA damper for isolation of three story building.

Development of a Seismic Isolation System for Commercial Storage Racks

2012 ◽  
Author(s):  
David H. Johnson ◽  
Robert J. Michael ◽  
Michael C. Pollino ◽  
Joseph D. Redovan ◽  
Eric E. Moser ◽  
...  
Keyword(s):  
Structural Damage ◽  
Seismic Isolation ◽  
Structural Engineering ◽  
Base Isolation ◽  
Earthquake Simulation ◽  
Element Analysis ◽  
Isolation System ◽  
Finite Element Analysis Simulation ◽  
Base Isolation System ◽  
Storage Racks

This paper provides an overview of an analysis performed on a new base isolation system developed for seismic isolation of steel pallet storage racks. Pallet storage racks are often found in warehousing for material storage and are designed to store materials on pallets in horizontal rows with multiple levels which are accessed by forklift trucks. The new isolation system provides seismic isolation in the cross-aisle direction by incorporating heavily damped elastomeric bearings (referred to here as seismic mounts) and low-friction bearing plates. The objective of the base isolation system is to reduce horizontal accelerations of the rack to eliminate product shedding and structural damage during a major earthquake without interfering with normal, day-to-day material handling operations. The paper presents a summary of numerical results (transient structural, finite element analysis simulation) comparing storage rack response against actual tests performed on a triaxial shake table in the Structural Engineering and Earthquake Simulation Laboratory (SEESL) at the University at Buffalo (see Filiatrault[1] et al. 2008 for comprehensive test details). The simulation model was then used to determine a set of optimal seismic isolation parameters that satisfy the practical range of rack shelf loads and configurations that can be expected in typical warehouse and store installations.

Sign in / Sign up

Export Citation Format

Share Document