scholarly journals Seismic Base Isolation System using Scrap Old Tyres

2020 ◽  
Vol 5 (3) ◽  
pp. 85-90
Keyword(s):  
Seismic Isolation ◽  
Structural Engineering ◽  
Base Isolation ◽  
Shock Propagation ◽  
Analysis Tool ◽  
Element Analysis ◽  
Isolation System ◽  
Isolation Technique ◽  
Base Isolation System ◽  
Seismic Vibrations

Enfeebling the effects of vibration caused by the movement of tectonic plates has been the major topic of research in the field of Structural Engineering. Base isolation is a technique used to counteract the effects of seismic vibration and ensuring the safety of the superstructure. Even though, the strategy of base isolation has been used in interminable number of structures, there is a need for economized, effective base isolation technique. India has been recycling and reusing waste tyres for four decades, it is estimated that 60% are disposed of through illegal dumping. India, being the second largest manufacturer of rubber after China, there is a menace of rubber disposal in the country. Despite the numerous efforts of technologists of recycling and utilizing the scrap rubber tyres, 17% of the scrap rubber tyres are diverted to landfill creating disposal problem. Therefore, there is a need for utilizing the used scrap rubber tyres in an innovative way instead of dumping it. Scrap Rubber tyres, being elastic in nature serve to be a potential shock absorber of seismic vibrations. In the present study, an attempt is made to utilize the recycled scrap rubber tyre in seismic isolation of structure. This technique proves to be a low- cost earthquake mitigation technique which can potentially reduce the damage caused by seismic shock propagation into the structure and hence ensure overall safety of the structure. An experimental analysis is done to evaluate the properties of assembly of rubber tyres and utilization of the same for isolating base of structures to check for the effectiveness in enfeebling the shocks produced by seismic vibrations. Furthermore, using the properties of scrap rubber tyres obtained from the experimental results, performance of the scrap tyres as a base isolation system for a multistoried building and stability of the structure was studied using Finite element analysis tool.

Development of a Seismic Isolation System for Commercial Storage Racks

2012 ◽  
Author(s):  
David H. Johnson ◽  
Robert J. Michael ◽  
Michael C. Pollino ◽  
Joseph D. Redovan ◽  
Eric E. Moser ◽  
...  
Keyword(s):  
Structural Damage ◽  
Seismic Isolation ◽  
Structural Engineering ◽  
Base Isolation ◽  
Earthquake Simulation ◽  
Element Analysis ◽  
Isolation System ◽  
Finite Element Analysis Simulation ◽  
Base Isolation System ◽  
Storage Racks

This paper provides an overview of an analysis performed on a new base isolation system developed for seismic isolation of steel pallet storage racks. Pallet storage racks are often found in warehousing for material storage and are designed to store materials on pallets in horizontal rows with multiple levels which are accessed by forklift trucks. The new isolation system provides seismic isolation in the cross-aisle direction by incorporating heavily damped elastomeric bearings (referred to here as seismic mounts) and low-friction bearing plates. The objective of the base isolation system is to reduce horizontal accelerations of the rack to eliminate product shedding and structural damage during a major earthquake without interfering with normal, day-to-day material handling operations. The paper presents a summary of numerical results (transient structural, finite element analysis simulation) comparing storage rack response against actual tests performed on a triaxial shake table in the Structural Engineering and Earthquake Simulation Laboratory (SEESL) at the University at Buffalo (see Filiatrault[1] et al. 2008 for comprehensive test details). The simulation model was then used to determine a set of optimal seismic isolation parameters that satisfy the practical range of rack shelf loads and configurations that can be expected in typical warehouse and store installations.

scholarly journals Seismic Isolation System using U-Shaped Steel Damper

2019 ◽  
Vol 8 (4) ◽  
pp. 12336-12339
Keyword(s):  
Seismic Isolation ◽  
Base Isolation ◽  
Structural Response ◽  
Time History ◽  
Earthquake Ground Motion ◽  
Isolation System ◽  
Isolation Technique ◽  
Base Isolation System ◽  
The Time Domain ◽  
External Forces

In the present paper base isolation system is analyzed and its seismic behavior is investigated using U-shaped steel dampers as an isolator by placing it at the bottom of the structure. It is the most popular way of protecting the structure using control techniques for earthquake ground motion. The dampers significantly reduced damage factors such as displacement and drift. To reduce structural response to external forces, which can be accomplished through the use of special protective systems. So to prevent these damages, seismic isolation technique can be used for newly constructed structures. The time history analysis of the time domain on this structure is conducted by using SAP2000 software

Laminated Type Isolation Device for Light Weight Structure Using Urethane Elastomer

2017 ◽  
Author(s):  
Kengo Goda ◽  
Osamu Furuya ◽  
Kohei Imamura ◽  
Kenta Ishihana
Keyword(s):  
Seismic Isolation ◽  
Base Isolation ◽  
Light Weight ◽  
Loading Test ◽  
Isolation System ◽  
Seismic Safety ◽  
Base Isolation System ◽  
Weight Structure ◽  
Isolation Device ◽  
Urethane Elastomer

At the present, base isolation system has been recognized by general earthquake resistant technique since the Great Hanshin Earthquake 1995. The seismic isolation will be aggressively applied to not only architectural and civil structures but also various structures, because the effectiveness on seismic safety had been demonstrated again in the Great East Japan Earthquake. In generally, although the base isolation system is divided into laminated rubber bearing type and friction sliding bearing type. In the case of former type, shape factor, maximum or minimum outer shapes and so on are restricted by the material characteristics in visco-elastic material. In general, the isolation structure is used in high damping rubber. However, we pay attention to base isolation using urethane elastomer. Urethane elastomer has excellent elasticity, mechanical strength, abrasion resistance, weather resistance, oil resistance, impact resistance the absorbent, anti-vibration and excellent low-temperature properties. Furthermore, it is possible to impart various characteristics by a combination of isocyanate and polyol and chain extender, requires no large-scale apparatus, it has the advantage molecular design is easy. In previous study, the research and development of laminated type base isolation device using urethane elastomer was carried out to upgrade a seismic safety for various structures. The fundamental characteristics was investigated from several loading test by using various experimental devices, and the design formula for the stiffness and equivalent damping coefficient is formulated as an approximate expression of mechanical characteristics until now. It was confirmed that urethane elastomer is not hardening up to 500% shear strain. Moreover, the experimental examination for aged deterioration in the urethane material has been continuously carried out. As the results, it was confirmed that the laminated type seismic isolation device using urethane elastomer is possible to develop as a practicable device from the stable mechanical properties as considering in design step. In this study, the small-scale laminated type base isolation device using urethane elastomer is advanced to the direction of further technical upgrading and of scale down for light-weight structure as a sever rack. The first stage, basic properties of the urethane elastomer has been investigated by loading test. Furthermore, the design equation is created by loading test using urethane elastomer. The validity of the design equation has been confirmed. The second stage, the compression creep test with laminated type base isolation device has been investigated to confirm an effect on light-weight mechanical devices.

Evaluation of the Isolation System Influence in the Seismic Loading Analysis Applied to a Near Term Deployment Reactor

2009 ◽  
Author(s):  
R. Lo Frano ◽  
G. Forasassi
Keyword(s):  
Nuclear Power ◽  
Seismic Isolation ◽  
Seismic Waves ◽  
Base Isolation ◽  
Methodological Approach ◽  
Response Spectra ◽  
Three Dimensional Model ◽  
Isolation System ◽  
Isolation Technique ◽  
Near Term

Nuclear power plant (NPP) design is strictly dependent on the seismic hazards and safety aspects related to the external events of the site. Passive vibration isolators are the most simple and reliable means to protect sensitive equipment from environmental shocks and vibrations. This paper concerns the methodological approach to treat isolation applied to a near term deployment reactor and its internals structures in order to attain a suitable decrease of response spectra at each floor along the height of the structure. The aim of this evaluation is to determine the seismic resistance capability of as-built structures systems and components in the event of the considered Safe Shutdown earthquake (SSE). The use of anti-seismic techniques, such as seismic isolation (SI) and passive energy dissipation, seems able to ensure the full integrity and operability of important structures and systems even in very severe seismic conditions. Therefore the seismic dynamic loadings, propagated up to the main reactor system and components, may be reduced by using the developed base-isolation system (high flexibility for horizontal motions) that might combine suitable dampers with the isolating components to support reactor structures and building. To investigate and analyze the effects of the mentioned earthquake on the considered reactor internals, a deterministic methodological approach, based on the evaluation of the propagation of seismic waves along the structure, was used. To the purpose of this study a numerical assessment of dynamic structural response behaviour of the structures was accomplished by means of the finite element approach and setting up, as accurately as possible, a representative three-dimensional model of mentioned NPP structures. The obtained results in terms of response spectra (carried out from both cases of isolated and not isolated seismic analyses) were compared in order to highlight the isolation technique effectiveness.

Three Dimensional Seismic Isolation System for Next-Generation Nuclear Power Plant With Rolling Seal Type Air Spring and Hydraulic Rocking Suppression System

2005 ◽  
Author(s):  
Takahiro Shimada ◽  
Junji Suhara ◽  
Kazuhiko Inoue
Keyword(s):  
Dynamic Loading ◽  
Nuclear Power ◽  
Seismic Isolation ◽  
Base Isolation ◽  
Three Dimensional ◽  
Loading Test ◽  
Isolation System ◽  
Ability Test ◽  
Base Isolation System ◽  
Suppression System

Three dimensional (3D) seismic isolation devices have been developed to use for the base isolation system of the heavy building like a nuclear reactor building. The developed seismic isolation system is composed of rolling seal type air springs and the hydraulic type springs with rocking suppression system for vertical base isolation device. In horizontal direction, the same laminated rubber bearings are used as horizontal isolation device for these systems. The performances and the applicability have already been evaluated by the technical feasibility tests and performance tests for each system. In this study, it was evaluated that the performance of the 3D base isolation system with rolling seal type air springs combined with hydraulic rocking suppression devices. A 1/7 scaled model of the 3D base isolation devices were manufactured and some performance test were executed for each device. For the rolling seal type air springs, dynamic loading test was executed with a vibration table, and pressure resistant ability test was executed for reinforced air springs. In the dynamic loading test, it is confirmed that the natural period and damping performance were verified. In the pressure resistant ability test, it is confirmed that the air springs had sufficient strength. For the hydraulic rocking suppression system, forced dynamic loading test was carried out in order to measure the frictional and oil flow resistance force on each cylinder. And the vibration table tests were carried out with supported weight of 228 MN in order to evaluate and to confirm the horizontal and vertical isolation performance, rocking suppression performance, and the applicability of the this seismic isolation system as the combined system. 4 rolling seal type air springs and 4 hydraulic load-carrying cylinders with rocking suppression devices supported the weight. As a result, the proposed system was verified that it could be applied to the actual nuclear power plant building to be target.

A study on seismic isolation of building used LRB

2020 ◽  
Vol 6 (2) ◽  
pp. 52
Author(s):  
Muhammet Yurdakul ◽  
Mehmet Burak Yıldız
Keyword(s):  
Seismic Isolation ◽  
Base Isolation ◽  
Dynamic Loads ◽  
Isolation System ◽  
Rubber Bearing ◽  
Lead Rubber Bearing ◽  
Earthquake Design ◽  
Base Isolation System ◽  
Internal Forces ◽  
Storey Building

Base isolation system with lead rubber bearing (LRB) is commonly used to prevent structure against to damage of earthquake. Design of LRB system is detailed in this study. The isolated building with LRB design according to Uniform Building Code (UBC-97) and fixed building were examined. The six-storey building with LRB and fixed building were modelled in SAP2000 with the same dynamic loads. The relative floor displacement and internal forces of the seismic isolated and fixed building are compared. In addition, transverse and longitudinal reinforcement of any axis of seismic isolated and fixed building are compared. Analyse results showed that effectiveness of using seismic isolation system on building. The weight of longitudinal and transverse reinforcement of isolated building is smaller than fixed building about 36%, 40% respectively.

scholarly journals Evaluating Collapse Fragility Curves for Existing Buildings Retrofitted Using Seismic Isolation

2020 ◽  
Vol 10 (8) ◽  
pp. 2844
Author(s):  
Amedeo Flora ◽  
Giuseppe Perrone ◽  
Donatello Cardone
Keyword(s):  
Seismic Isolation ◽  
Failure Modes ◽  
Base Isolation ◽  
Fragility Curves ◽  
Limit State ◽  
Spectral Acceleration ◽  
Existing Buildings ◽  
Isolation System ◽  
Isolation Technique ◽  
Design Earthquake

Few studies have investigated so far the collapse capacity of buildings with base-isolation. In such studies, preliminary considerations have been drawn based on a number of assumptions regarding: (i) the methodology used for assessing the collapse capacity, (ii) the collapse conditions and failure modes assumed for both superstructure and isolation system, and (iii) the numerical modeling assumptions. The main results pointed out that the collapse conditions of base-isolated buildings may occur for intensity levels slightly higher than those associated with the design earthquake. In this paper, further developments are made through the use of enhanced models for the description of the behavior of a rubber-based isolation system and the assumption of more rational collapse conditions. Collapse fragility functions, in terms of mean and dispersion values, are proposed for two archetypes representative of existing buildings retrofitted using the seismic isolation technique. The collapse margin ratio (median collapse capacity Sa,C, namely the spectral acceleration associated to a probability of exceedance equal to 50%, divided by the design spectral acceleration at the collapse prevention limit state) has been evaluated for each examined case-study. Values ranging from 1.10 to 1.45 were found.

Seismic Evaluation of Base Isolated System Equipped with Shape Memory Alloys

2013 ◽  
Vol 831 ◽  
pp. 110-114
Author(s):  
S. Alvandi ◽  
M. Ghassemieh
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Seismic Isolation ◽  
Passive Control ◽  
Structural Model ◽  
Base Isolation ◽  
Base Shear ◽  
Seismic Evaluation ◽  
Isolation System ◽  
Base Isolation System

Seismic isolation system is an example of passive control system that effectively improves the performance of structures. This research discusses the seismic performance of a elastomeric base isolation system which provide the combined features of vertical load support, horizontal flexibility and energy absorbing capacity, utilizing shape memory alloys that provides re-centering force and additional damping in the system. Also this paper compares the effect of such alloys with memory effect and/or superelasticity (with pre-straining) in base isolated structure. To provide such comparison, a nonlinear structural model has been developed on some benchmark control problems and some health monitoring evaluation criterias are used. The smart base isolation utilizes the different responses of shape memory alloys at several levels of strain to control the displacements of the rubber bearing and base shear at excitation level. Furthermore the proposed based isolation systems has enhanced performance in terms of response reduction and re-centering capacity.

Sign in / Sign up

Export Citation Format

Share Document