CFD Study on the Role of Gas Friction on the Molten Layer Shape and Melt Removal Mechanism in Laser Cutting Process of Steel

2013 ◽  
Vol 856 ◽  
pp. 220-225 ◽  
Author(s):  
Karim Kheloufi ◽  
El Hachemi Amara
Keyword(s):  
Friction Force ◽  
Laser Cutting ◽  
Cutting Process ◽  
Gradient Force ◽  
Pressure Gradient Force ◽  
Central Plane ◽  
Removal Mechanism ◽  
Molten Layer ◽  
Wavy Structure

A numerical analysis of the role of the gas friction force on the shape of the melt surface in laser cutting process is carried out. The liquid film shape is analyzed in the central plane of cutting for both cases with the pressure gradient force only and for the case of gas friction force contribution. It is shown that, the gas friction force has a significant role in the formation of humps in the central kerf zone and the transition from the smooth melt ejection regime to a wavy structure characterized by humps formation.

scholarly journals Subsiding Shells around Shallow Cumulus Clouds

2008 ◽  
Vol 65 (3) ◽  
pp. 1003-1018 ◽  
Author(s):  
Thijs Heus ◽  
Harm J. J. Jonker
Keyword(s):  
Detailed Comparison ◽  
Momentum Equation ◽  
Gradient Force ◽  
Pressure Gradient Force ◽  
Cumulus Clouds ◽  
Responsible Mechanism ◽  
Lateral Mixing ◽  
Environmental Air ◽  
The Individual

Abstract In this study large-eddy simulations (LES) are used to gain more knowledge on the shell of subsiding air that is frequently observed around cumulus clouds. First, a detailed comparison between observational and numerical results is presented to better validate LES as a tool for studies of microscale phenomena. It is found that horizontal cloud profiles of vertical velocity, humidity, and temperature are in good agreement with observations. They show features similar to the observations, including the presence of the shell of descending air around the cloud. Second, the availability of the complete 3D dataset in LES has been exploited to examine the role of lateral mixing in the exchange of cloud and environmental air. The origin of the subsiding shell is examined by analyzing the individual terms of the vertical momentum equation. Buoyancy is found to be the driving force for this shell, and it is counteracted by the pressure-gradient force. This shows that evaporative cooling at the cloud edge, induced by lateral mixing of cloudy and environmental air, is the responsible mechanism behind the descending shell. For all clouds, and especially the smaller ones, the negative mass flux generated by the subsiding shell is significant. This suggests an important role for lateral mixing throughout the entire cloud layer. The role of the shell in these processes is further explored and described in a conceptual three-layer model of the cloud.

Processes Preventing the Development of a Significant Tornado in a Colorado Supercell on 26 May 2010

2020 ◽  
Vol 148 (5) ◽  
pp. 1753-1778
Author(s):  
Shawn S. Murdzek ◽  
Paul M. Markowski ◽  
Yvette P. Richardson ◽  
Robin L. Tanamachi
Keyword(s):  
Small Radius ◽  
Future Research ◽  
Gradient Force ◽  
Pressure Gradient Force ◽  
Far Field ◽  
Streamwise Vorticity ◽  
Low Level ◽  
Precipitation Region ◽  
Negative Buoyancy

Abstract A supercell produced a nearly tornadic vortex during an intercept by the Second Verification of the Origins of Rotation in Tornadoes Experiment on 26 May 2010. Using observations from two mobile radars performing dual-Doppler scans, a five-probe mobile mesonet, and a proximity sounding, factors that prevented this vortex from strengthening into a significant tornado are examined. Mobile mesonet observations indicate that portions of the supercell outflow possessed excessive negative buoyancy, likely owing in part to low boundary layer relative humidity, as indicated by a high environmental lifted condensation level. Comparisons to a tornadic supercell suggest that the Prospect Valley storm had enough far-field circulation to produce a significant tornado, but was unable to converge this circulation to a sufficiently small radius. Trajectories suggest that the weak convergence might be due to the low-level mesocyclone ingesting parcels with considerable crosswise vorticity from the near-storm environment, which has been found to contribute to less steady and weaker low-level updrafts in supercell simulations. Yet another factor that likely contributed to the weak low-level circulation was the inability of parcels rich in streamwise vorticity from the forward-flank precipitation region to reach the low-level mesocyclone, likely owing to an unfavorable pressure gradient force field. In light of these results, we suggest that future research should continue focusing on the role of internal, storm-scale processes in tornadogenesis, especially in marginal environments.

scholarly journals The Role of Surface Drag in Mesocyclone Intensification Leading to Tornadogenesis within an Idealized Supercell Simulation

2017 ◽  
Vol 74 (9) ◽  
pp. 3055-3077 ◽  
Author(s):  
Brett Roberts ◽  
Ming Xue
Keyword(s):  
Pressure Gradient ◽  
Surface Friction ◽  
Gradient Force ◽  
Pressure Gradient Force ◽  
Surface Drag ◽  
Vertical Pressure ◽  
Low Level ◽  
Physical Mechanisms ◽  
Key Factor

Abstract The idealized supercell simulations in a previous study by Roberts et al. are further analyzed to clarify the physical mechanisms leading to differences in mesocyclone intensification between an experiment with surface friction applied to the full wind (FWFRIC) and an experiment with friction applied to the environmental wind only (EnvFRIC). The low-level mesocyclone intensifies rapidly during the 3 min preceding tornadogenesis in FWFRIC, while the intensification during the same period is much weaker in EnvFRIC, which fails to produce a tornado. To quantify the mechanisms responsible for this discrepancy in mesocyclone evolution, material circuits enclosing the low-level mesocyclone are initialized and traced back in time, and circulation budgets for these circuits are analyzed. The results show that in FWFRIC, surface drag directly generates a substantial proportion of the final circulation around the mesocyclone, especially below 1 km AGL; in EnvFRIC, circulation budgets indicate the mesocyclone circulation is overwhelmingly barotropic. It is proposed that the import of near-ground, frictionally generated vorticity into the low-level mesocyclone in FWFRIC is a key factor causing the intensification and lowering of the mesocyclone toward the ground, creating a large upward vertical pressure gradient force that leads to tornadogenesis. Similar circulation analyses are also performed for circuits enclosing the tornado at its genesis stage. The frictionally generated circulation component is found to contribute more than half of the final circulation for circuits enclosing the tornado vortex below 400 m AGL, and the frictional contribution decreases monotonically with the height of the final circuit.

Method to evaluate residual stresses in the laser cutting process

2002 ◽  
Vol 12 (1) ◽  
pp. 27-41 ◽  
Author(s):  
Y. Zamachtchikov ◽  
F. Breaban ◽  
P. Vantomme ◽  
A. Deffontaine
Keyword(s):  
Residual Stresses ◽  
Laser Cutting ◽  
Cutting Process

scholarly journals Sensitivity of Hurricane Intensity Forecast to Convective Momentum Transport Parameterization

2006 ◽  
Vol 134 (2) ◽  
pp. 664-674 ◽  
Author(s):  
Jongil Han ◽  
Hua-Lu Pan
Keyword(s):  
Wind Shear ◽  
Vertical Wind Shear ◽  
Momentum Transport ◽  
Gradient Force ◽  
Pressure Gradient Force ◽  
Momentum Exchange ◽  
Forecast System ◽  
Hurricane Intensity ◽  
Convective Momentum Transport ◽  
The Many

Abstract A parameterization of the convection-induced pressure gradient force (PGF) in convective momentum transport (CMT) is tested for hurricane intensity forecasting using NCEP's operational Global Forecast System (GFS) and its nested Regional Spectral Model (RSM). In the parameterization the PGF is assumed to be proportional to the product of the cloud mass flux and vertical wind shear. Compared to control forecasts using the present operational GFS and RSM where the PGF effect in CMT is taken into account empirically, the new PGF parameterization helps increase hurricane intensity by reducing the vertical momentum exchange, giving rise to a closer comparison to the observations. In addition, the new PGF parameterization forecasts not only show more realistically organized precipitation patterns with enhanced hurricane intensity but also reduce the forecast track error. Nevertheless, the model forecasts with the new PGF parameterization still largely underpredict the observed intensity. One of the many possible reasons for the large underprediction may be the absence of hurricane initialization in the models.

The Role of Oxidation in Laser Cutting Stainless and Mild Steel

1991 ◽  
Vol 3 (3) ◽  
pp. 41-45 ◽  
Author(s):  
A. Ivarson ◽  
J. Powell ◽  
C. Magnusson
Keyword(s):  
Mild Steel ◽  
Laser Cutting
Sign in / Sign up

Export Citation Format

Share Document