Experimental Investigation of Dust Amount from Free Falling Particle Stream Effected by Deflector Curvature of Dust Suppression
This paper focuses on the study of the curvatures of deflector installed on the below receiving device to effect the dust amount from the free falling particle stream. The deflector curvature was artificially controlled to limit the fugitive dust direction which was generated by the collision between the free falling bulk materials and the receiving device. This method was used to improve efficiency of the dust control system to exhaust fugitive dust, and to achieve the targets of energy conservation and emissions reduction. The experimental method was adopted to explore the relationship between the deflector curvature and the producing dust quantity. The experimental results indicated that, the dust suppression effect containing deflector contained a certain radian was more remarkable, when the height of the free falling of bulk materials was constant. The producing dust quantity decreased slightly with the deflector curvature increasing, and then increased rapidly. When the deflector curvature was 0.045 cm-1 or 0.060cm-1, the minimum of producing dust quantity could be obtained, and the dust removal effect might be significant.