Chemical and Mineralogical Characterizations of Cobalt Precursor Recovered from Spent Lithium-Ion Batteries with Incineration Process

2014 ◽  
Vol 878 ◽  
pp. 51-56
Author(s):  
Tao Zhang ◽  
Ya Qun He ◽  
Lin Han Ge ◽  
Hong Li ◽  
Shan Wu
Keyword(s):  
Thermal Treatment ◽  
Lithium Ion Batteries ◽  
Photoelectron Spectroscopy ◽  
Lithium Ion ◽  
Chemical State ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
State Changes ◽  
Incineration Process

The chemical and mineralogical characterizations of cobalt precursor recovered from spent lithium-ion batteries with incineration process was analyzed by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). It indicates that Co exists in the form of LiCoO2. However, after thermal treatment, complex products including LiCoO2, Co3O4, and Co2AlO4 etc. generated, in which Co3O4 has strong signal. The XPS spectra shows that Li(1-x)CoO2 and LiCoO2 are the main chemical state of Co in the original sample, but after thermal treatment, the chemical state changes to Co3O4. Besides, there are undecomposed Li(1-x)CoO2, CoF3 and Co. Analyses indicate that Co is enriched after thermal treatment and chemical state of some Co have been certified.

New Li 0.8 M 0.1 Ti 2 (PO 4 ) 3 (M=Co, Mg) Electrode Materials for Lithium‐Ion Batteries: In Operando X‐Ray Diffraction and Ex Situ X‐ray Photoelectron Spectroscopy Investigations

2020 ◽  
Vol 7 (17) ◽  
pp. 3637-3645
Author(s):  
Hasna Aziam ◽  
Mariyam Susana Dewi Darma ◽  
Michael Knapp ◽  
Sylvio Indris ◽  
Helmut Ehrenberg ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Photoelectron Spectroscopy ◽  
Electrode Materials ◽  
Lithium Ion ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
X Ray ◽  
In Operando

Synthesis, Structure and Electronic Properties of Li4Ti5O12 Anode Material for Lithium Ion Batteries

2018 ◽  
Vol 271 ◽  
pp. 9-17 ◽  
Author(s):  
Lkhagvajav Sarantuya ◽  
Galsan Sevjidsuren ◽  
Pagvajav Altantsog ◽  
Namsrai Tsogbadrakh
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
Spinel Phase ◽  
Rate Capability ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Average Grain Size

Nanosized spinel Li4Ti5O12 was successfully synthesized by a solid state reaction method at 800°C according to the Li4Ti5O12cubic spinel phase structure. In this synthesizing process, anatase TiO2and Li2CO3were used as reactants. The average grain size of the synthesized powders was around 200 nm. The synthesized Li4Ti5O12powder was characterized X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectrometry (EDS), and Specific Surface Area Analyzer (BET, Brunner-Emmett-Teller) respectively. X-ray diffraction results show that calcination temperature and time have the important effects on the crystal structure of Li4Ti5O12powder. In this study, we used a first principle method, based on the density functional theory to explore electronic and structural properties of Li4Ti5O12, as anode material for lithium ion batteries. Differences on these properties between delithiation state Li4Ti5O12and lithiation state Li7Ti5O12are compared. All the predicted structural and electrochemical properties agree closely with the experimental findings in literature. The average intercalation voltage of 1.4V during charging/discharging were obtained. We have shown that the Li4Ti5O12material exhibits insulating behavior with the band gap of 3.16 and 3.90 eV using the GGA and GGA+U+J0calculations respectively. Li7Ti5O12becomes metallic as Li atoms inserted in Li4Ti5O12material. Spinel Li4Ti5O12has been regarded as an attractive anode material for the development of high-power lithium-ion batteries because of its unique attributes of high safety and rate capability.

scholarly journals Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder

2021 ◽  
Author(s):  
Xinyue Li ◽  
Marco Fortunato ◽  
Anna Maria Cardinale ◽  
Angelina Sarapulova ◽  
Christian Njel ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Electrode Material ◽  
Photoelectron Spectroscopy ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Electrochemical Study ◽  
Ex Situ ◽  
Potential Range ◽  
X Ray ◽  
Storage Mechanism

AbstractNickel aluminum layered double hydroxide (NiAl LDH) with nitrate in its interlayer is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li+/Li) and of the binder on the performance of the material is investigated in 1 M LiPF6 in EC/DMC vs. Li. The NiAl LDH electrode based on sodium alginate (SA) binder shows a high initial discharge specific capacity of 2586 mAh g−1 at 0.05 A g−1 and good stability in the potential range of 0.01–3.0 V vs. Li+/Li, which is better than what obtained with a polyvinylidene difluoride (PVDF)-based electrode. The NiAl LDH electrode with SA binder shows, after 400 cycles at 0.5 A g−1, a cycling retention of 42.2% with a capacity of 697 mAh g−1 and at a high current density of 1.0 A g−1 shows a retention of 27.6% with a capacity of 388 mAh g−1 over 1400 cycles. In the same conditions, the PVDF-based electrode retains only 15.6% with a capacity of 182 mAh g−1 and 8.5% with a capacity of 121 mAh g−1, respectively. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li+ insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. Graphical abstract The as-prepared NiAl-NO3−-LDH with the rhombohedral R-3 m space group is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li+/Li) and of the binder on the material’s performance is investigated in 1 M LiPF6 in EC/DMC vs. Li. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li+ insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. This work highlights the possibility of the direct application of NiAl LDH materials as negative electrodes for LIBs.

scholarly journals Optical, XPS and XRD Studies of Semiconducting Copper Sulfide Layers on a Polyamide Film

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Valentina Krylova ◽  
Mindaugas Andrulevičius
Keyword(s):  
Photoelectron Spectroscopy ◽  
Copper Sulfide ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Xrd Studies ◽  
Polyamide Film ◽  
Indirect Band Gap ◽  
Xrd Method

Copper sulfide layers were formed on polyamide PA 6 surface using the sorption-diffusion method. Polymer samples were immersed for 4 and 5 h in 0.15 mol⋅  solutions and acidified with HCl (0.1 mol⋅) at . After washing and drying, the samples were treated with Cu(I) salt solution. The samples were studied by UV/VIS, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) methods. All methods confirmed that on the surface of the polyamide film a layer of copper sulfide was formed. The copper sulfide layers are indirect band-gap semiconductors. The values of are 1.25 and 1.3 eV for 4 h and 5 h sulfured PA 6 respectively. Copper XPS spectra analyses showed Cu(I) bonds only in deeper layers of the formed film, while in sulfur XPS S 2p spectra dominating sulfide bonds were found after cleaning the surface with ions. It has been established by the XRD method that, beside , the layer contains as well. For PA 6 initially sulfured 4 h, grain size forchalcocite, , was  nm and fordjurleite, , it was 54.17 nm. The sheet resistance of the obtained layer varies from 6300 to 102 .

scholarly journals Superionic Solid Electrolyte Li7La3Zr2O12 Synthesis and Thermodynamics for Application in All-Solid-State Lithium-Ion Batteries

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 281
Author(s):  
Daniil Aleksandrov ◽  
Pavel Novikov ◽  
Anatoliy Popovich ◽  
Qingsheng Wang
Keyword(s):  
Free Energy ◽  
Solid State ◽  
Lithium Ion Batteries ◽  
Gibbs Free Energy ◽  
Thermodynamic Characteristics ◽  
Lithium Ion ◽  
Standard Enthalpy Of Formation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Binary Compounds

Solid-state reaction was used for Li7La3Zr2O12 material synthesis from Li2CO3, La2O3 and ZrO2 powders. Phase investigation of Li7La3Zr2O12 was carried out by x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS) methods. The thermodynamic characteristics were investigated by calorimetry measurements. The molar heat capacity (Cp,m), the standard enthalpy of formation from binary compounds (ΔoxHLLZO) and from elements (ΔfHLLZO), entropy (S0298), the Gibbs free energy of the Li7La3Zr2O12 formation (∆f G0298) and the Gibbs free energy of the LLZO reaction with metallic Li (∆rGLLZO/Li) were determined. The corresponding values are Cp,m = 518.135 + 0.599 × T − 8.339 × T−2, (temperature range is 298–800 K), ΔoxHLLZO = −186.4 kJ·mol−1, ΔfHLLZO = −9327.65 ± 7.9 kJ·mol−1, S0298 = 362.3 J·mol−1·K−1, ∆f G0298 = −9435.6 kJ·mol−1, and ∆rGLLZO/Li = 8.2 kJ·mol−1, respectively. Thermodynamic performance shows the possibility of Li7La3Zr2O12 usage in lithium-ion batteries.

Study of Structural Changes in LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium-Ion Batteries by X-Ray Diffraction Analysis in the In Situ Mode

2019 ◽  
Vol 92 (7) ◽  
pp. 1013-1019 ◽  
Author(s):  
P. A. Novikov ◽  
A. E. Kim ◽  
K. A. Pushnitsa ◽  
Wang Quingsheng ◽  
M. Yu. Maksimov ◽  
...  
Keyword(s):  
Cathode Material ◽  
Diffraction Analysis ◽  
Lithium Ion Batteries ◽  
Structural Changes ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document