Laboratory Investigation on Mechanical Behavior of Artificial Ice under Triaxial Compression

2014 ◽  
Vol 887-888 ◽  
pp. 903-906
Author(s):  
Xiang Tian Xu ◽  
Jun Hong Yuan ◽  
Rui Qiang Bai
Keyword(s):  
Strain Rate ◽  
Mechanical Behavior ◽  
Laboratory Investigation ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Experimental Results ◽  
Compression Tests ◽  
Strain Behavior ◽  
Triaxial Compression Tests ◽  
Deformation And Strength Characteristics

A series of triaxial compression tests on an artificial ice with strain rate of 1.67×10-4/s at-6°C are carried out to investigate the mechanical behavior of ice. The influence of confining pressure on deformation and strength characteristics of ice is analyzed based on the experimental results. The results show that the stress-strain behavior and the strength of ice changes with increasing pressure in two distinct phases.

scholarly journals Triaxial Testing of Geosynthetics Reinforced Tailings with Different Reinforced Layers

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1943
Author(s):  
Fu Yi ◽  
Changbo Du
Keyword(s):  
Triaxial Compression ◽  
Friction Angle ◽  
Confining Pressure ◽  
Test Results ◽  
Compression Tests ◽  
Strength Index ◽  
Stress Strain ◽  
High Confining Pressure ◽  
Zhang Model ◽  
Triaxial Compression Tests

To evaluate the shear properties of geotextile-reinforced tailings, triaxial compression tests were performed on geogrids and geotextiles with zero, one, two, and four reinforced layers. The stress–strain characteristics and reinforcement effects of the reinforced tailings with different layers were analyzed. According to the test results, the geogrid stress–strain curves show hardening characteristics, whereas the geotextile stress–strain curves have strain-softening properties. With more reinforced layers, the hardening or softening characteristics become more prominent. We demonstrate that the stress–strain curves of geogrids and geotextile reinforced tailings under different reinforced layers can be fitted by the Duncan–Zhang model, which indicates that the pseudo-cohesion of shear strength index increases linearly whereas the friction angle remains primarily unchanged with the increase in reinforced layers. In addition, we observed that, although the strength of the reinforced tailings increases substantially, the reinforcement effect is more significant at a low confining pressure than at a high confining pressure. On the contrary, the triaxial specimen strength decreases with the increase in the number of reinforced layers. Our findings can provide valuable input toward the design and application of reinforced engineering.

Mechanical Properties of Bentonite-Sand Mixtures Under Triaxial Stress Condition

1994 ◽  
Vol 353 ◽  
Author(s):  
M. Umedera ◽  
A. Fujiwara ◽  
N. Yasufuku ◽  
M. Hyodo ◽  
H. Murata
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Water Content ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Strength Properties ◽  
Compression Tests ◽  
Optimum Water Content ◽  
Triaxial Compression Tests ◽  
Optimum Water

AbstractA series of triaxial compression tests is being conducted under the drained condition on bentonite and sand mixtures, known as buffer, in saturated and optimum water content states to clarify the mechanical properties of the buffer.It was found that the mechanical properties of bentonite and sand mixtures are strongly influenced by water and bentonite contents: shear strength in a saturated state is less than that in an optimum water content state; shear strength decreases rapidly with increasing bentonite content. Strength properties are much dependent on confining pressure.

Small-strain behavior of frozen sand in triaxial compression

1995 ◽  
Vol 32 (3) ◽  
pp. 428-451 ◽  
Author(s):  
Glen R. Andersen ◽  
Christopher W. Swan ◽  
Charles C. Ladd ◽  
John T. Germaine
Keyword(s):  
High Pressure ◽  
Strain Rate ◽  
Yield Stress ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Strain Curve ◽  
Confining Pressure ◽  
Stress Strain ◽  
Strain Behavior ◽  
Frozen Sand

The stress–strain behavior of frozen Manchester fine sand has been measured in a high-pressure low-temperature triaxial compression testing system developed for this purpose. This system incorporates DC servomotor technology, lubricated end platens, and on-specimen axial strain devices. A parametric study has investigated the effects of changes in strain rate, confining pressure, sand density, and temperature on behavior for very small strains (0.001%) to very large (> 20%) axial strains. This paper presents constitutive behavior for strain levels up to 1%. On-specimen axial strain measurements enabled the identification of a distinct upper yield stress (knee on the stress–strain curve) and a study of the behavior in this region with a degree of precision not previously reported in the literature. The Young's modulus is independent of strain rate and temperature, increases slightly with sand density in a manner consistent with Counto's model for composite materials, and decreases slightly with confining pressure. In contrast, the upper yield stress is independent of sand density, slightly dependent on confining pressure (considered a second order effect), but is strongly dependent on strain rate and temperature in a fashion similar to that for polycrystalline ice. Key words : frozen sand, high-pressure triaxial compression, strain rate, temperature, modulus, yield stress.

scholarly journals Analysis of Failure Characteristics and Strength Criterion of Coal-Rock Combined Body with Different Height Ratios

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Tuo Wang ◽  
Zhanguo Ma ◽  
Peng Gong ◽  
Ning Li ◽  
Shixing Cheng
Keyword(s):  
Shear Failure ◽  
Underground Mining ◽  
Triaxial Compression ◽  
Peak Stress ◽  
Strength Criterion ◽  
Confining Pressure ◽  
Experimental Results ◽  
Compression Tests ◽  
Rock Body ◽  
Coal Rock

In underground mining and roadway support engineering of coal mine, the coal and rock layers bear loads together; therefore, the deformation and mechanical characteristics of the coal-rock combined bodies are not the same as those of the pure coal or rock bodies. In this paper, conventional triaxial compression tests of coal-rock combined bodies with different height ratios were conducted. And the stress and deformation characteristics of coal-rock combined body were studied and the experimental results were analyzed with different strength criteria. The results show that the peak stress, elastic modulus, and strength reduction coefficient of coal-rock combined body are negatively correlated with the ratio of coal to coal-rock combination height and positively correlated with the confining pressure; the coal-rock combination shows obvious ductility under 10 MPa confining pressure. Under the conventional triaxial condition, the shear failure was the main cause of the lateral deformation of the coal body in the coal-rock combination, which was much larger than that of the rock body. The circle deformation value, volume strain value, and the deformation rate in the postpeak stage of coal-rock combination are much higher than those in the prepeak stage. Mohr–Coulomb and general Hoek–Brown strength criterion fit the experimental results well.

Experimental Study of Stress-Strain Characteristics of the Fly Ash Blended with Curing Agent

2010 ◽  
Vol 168-170 ◽  
pp. 1934-1942
Author(s):  
Zheng Shen ◽  
Lan Zong ◽  
Xiang Dong
Keyword(s):  
Fly Ash ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Uniaxial Stress ◽  
Curing Agent ◽  
Compression Tests ◽  
Growth Trend ◽  
Stress Strain ◽  
Confining Pressures ◽  
Triaxial Compression Tests

The stress-strain characteristics of the fly ash blended with curing agent was studied using uniaxial and triaxial compression tests. Curing agent JNS-2 was used as the stabilizing agents in sample preparation. Four curing agent JNS-2 contents of 3%, 6%, 9% and 12% were selected for sample preparation. UU triaxial compression tests were conducted in a range of confining pressures from 100 kPa to 300 kPa. The experimental results obtained from the laboratory tests showed that curing age, mixture ratio, compaction degree and confining pressures had significant influence on the shape of curves. Uniaxial stress-strain test results demonstrated that the latter strength and deformation characteristics of the fly ash blended with curing agent grew little and with the increase of curing agent amount and compaction factor, the curve of uniaxial stress-strain changed significantly. On the other hand, triaxial stress-strain test results indicted that the failure strain showed a partial negative growth trend with the increase of curing agent amount, and the failure stress showed a partial positive growth trend with the increase of curing agent amount. When the curve was at high confining pressure, it showed hardening type, when at low confining pressure it showed softening type.

Isothermal modeling of sand–bentonite mixtures at elevated temperatures

1995 ◽  
Vol 32 (1) ◽  
pp. 78-88 ◽  
Author(s):  
B.E. Lingnau ◽  
J. Graham ◽  
N. Tanaka
Keyword(s):  
Shear Strength ◽  
Elevated Temperatures ◽  
Triaxial Compression ◽  
Friction Angle ◽  
Compression Tests ◽  
Strain Behavior ◽  
Bentonite Buffer ◽  
State Boundary ◽  
Increasing Temperature ◽  
Triaxial Compression Tests

Two models are proposed for describing the stress–strain behavior of sand–bentonite (buffer) mixtures at elevated temperatures: (1) isothermal pseudoelasticity and (2) isothermal elastic-plasticity. Data to support the models come from consolidated undrained triaxial compression tests performed on dense saturated buffer specimens at effective confining stresses up to 9.0 MPa and temperatures of 26°, 65°, and 100 °C. Measurements indicate that volumes decrease with increasing temperature if the tests are carried out under drained conditions. These trends can be modelled by a family of hardening lines in semilog compression space. Power law relationships are presented for undrained shear-strength envelopes that increase in size with an increase in temperature. The slopes of unload-reload lines, κ, in semilog compression space vary with temperature and can be related to systematic variation in the friction angle [Formula: see text]. The shear modulus G50 at 50% peak strength also depends on temperature. Several plotting techniques are used to show the existence of different state boundary surfaces for each test temperature. Key words : sand–bentonite, buffer, compression, shear strength, temperature, modelling.

scholarly journals Assessment of strength and deformation of lightweight concrete and its components under triaxial compression, taking into account the macrostructure of the material

2021 ◽  
Vol 264 ◽  
pp. 02015
Author(s):  
Chorikul Raupov ◽  
Ulugbek Shermuxamedov ◽  
Anora Karimova
Keyword(s):  
Lightweight Concrete ◽  
Triaxial Compression ◽  
Experimental Studies ◽  
Confining Pressure ◽  
Hardened Cement ◽  
Compression Tests ◽  
Triaxial Strength ◽  
Pressure Parameter ◽  
Strength And Deformation ◽  
Triaxial Compression Tests

The paper presents the results of experimental studies on the strength and deformations of lightweight concrete, mortar matrix and hardened cement paste under triaxial compression. Tests on samples were carried out using short-term triaxial proportional σ1 > σ2 = σ3 loading (i.e. axial compression + lateral hydrostatic pressure). During the loading, the ratio of the main stresses (both axial and lateral) was kept constant up to the end of tests. The experimental studies were carried out for different low ratios of σ2/σ1. A theoretical estimation has been discussed to approximate experimental results and prediction of triaxial strength values for different types of lightweight concrete. An estimation of the confining pressure parameter K has been done for the used mode of loading.

Numerical Simulation for the Deformation of Composite Wall Insulation System

2011 ◽  
Vol 374-377 ◽  
pp. 187-190
Author(s):  
Tao Cheng
Keyword(s):  
Constitutive Model ◽  
Triaxial Compression ◽  
Constitutive Relations ◽  
Compression Tests ◽  
Stress Strain ◽  
Strain Behavior ◽  
Nonlinear Constitutive Model ◽  
Isotropic Consolidation ◽  
Composite Wall ◽  
Triaxial Compression Tests

The nonlinear constitutive relations of clay are investigated with different initial stress conditions. Two series of triaxial compression tests are performed, respectively after consolidation and isotropic consolidation. On the basis of the framework of ~ model, a uniform nonlinear constitutive model is proposed by fitting of the test data. With the average slope of the unloading-reloading curve selected as the unloading modulus, the unloading function is constructed as the loading-unloading criterion. Moreover, a comparison of the experimental stress-strain curves with the predicted results by the constitutive model is made. It is shown that the model prediction is reasonable, which can reflect the stress-strain behavior of the soil under the consolidation and isotropic consolidation conditions.

Analysis on Bolt Supporting Mechanism for Roadways Driving along next Goaf Based on Triaxial Compression Test

2012 ◽  
Vol 594-597 ◽  
pp. 1159-1162
Author(s):  
Sheng Zhong ◽  
Yong Jie Yang ◽  
Min Wang
Keyword(s):  
Mechanical Test ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Test System ◽  
Deformation Characteristics ◽  
Compression Tests ◽  
Conventional Triaxial Compression ◽  
Strength And Deformation ◽  
Rock Mechanical Test ◽  
Triaxial Compression Tests

Conventional triaxial compression tests of coal specimens are carried out by MTS815 servo-controlled rock mechanical test system, and the strength and deformation characteristics of coal under different confining pressure are analyzed. On that basis, bolt supporting mechanism of surrounding rocks of roadways driving along next goaf is studied.

Sign in / Sign up

Export Citation Format

Share Document