Dynamic Simulation Research on the Sorting Machine Induction Based on the Virtual Prototyping

2014 ◽  
Vol 889-890 ◽  
pp. 48-51
Author(s):  
Wei Chen ◽  
Qing Xuan Jia ◽  
Han Xu Sun ◽  
Si Cheng Nian
Keyword(s):  
Simulation Analysis ◽  
Contact Point ◽  
Prototype Model ◽  
Simulation Research ◽  
Sorting Machine ◽  
Dynamical Simulation ◽  
Development Costs ◽  
Adams Software ◽  
Dynamic Performances ◽  
Velocity Changes

The virtual prototype model is established for the induction station system of the parcel sorting machine. The key problems of the belt modeling and the constraint between belt and bearing are solved. The dynamical simulation analysis of the induction station system is carried out using ADAMS software. Based on the position and velocity changes of the contact point between belt and the parcel, the dynamic performances for the induction station system are gained. This research saves the development costs and time, and provides theoretical basis for working parameter design of the induction station system.

Dynamics Simulation Analysis of Centrifuge Facility-Vibration Shaker System Virtual Mocking Based on Flexible Centrifuge Arm

2013 ◽  
Vol 427-429 ◽  
pp. 266-270
Author(s):  
Yue Gang Wang ◽  
Zhao Yang Zuo ◽  
Jian Guo Wu ◽  
Hai Bo Li
Keyword(s):  
Dynamic Model ◽  
Simulation Analysis ◽  
Dynamics Simulation ◽  
Ansys Software ◽  
Dynamical Simulation ◽  
Coupling System ◽  
Adams Software ◽  
Multi Body ◽  
Vibration Shaker ◽  
Body Dynamic

In order to study the dynamic characteristics of centrifuge facility-vibration shaker system, In the establishment of centrifuge facility-vibration shaker system multi-body dynamic model based on virtual mocking technology, the virtual dynamic model of the entire centrifuge facility-vibration shaker system more close to reality is built up by the transmission of finite element of flexible centrifuge arm. This paper describes how to build the 3-D virtual prototype of centrifuge facility-vibration shaker system by using Pro/e and ADAMS software, and how to create the modal neutral file of the centrifuge arm by using ANSYS software. Considering the system as a rigid-flexible coupling system, the dynamical simulation is carried out, and the results are benefit for the further research of its kinetic behavior, dynamic and variable characteristics basis and the design of such system.

Design and Simulation Analysis of the Manipulator Used to Feed Gems

2013 ◽  
Vol 364 ◽  
pp. 365-369
Author(s):  
Xiao Lin Deng ◽  
Heng Bing Wei
Keyword(s):  
Simulation Analysis ◽  
Three Dimensional ◽  
Dynamics Simulation ◽  
Kinematics And Dynamics ◽  
Prototype Model ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Adams Software ◽  
Working Principle ◽  
Design Requirements

This paper studies and designs the gems feeding manipulator, makes a detailed analysis of the overall structure and working principle of the manipulator, and establishes the three-dimensional model of the manipulator. The virtual prototype model of the manipulator is built in ADAMS software. Use simulation analysis functions of ADAMS to carry out kinematics and dynamics simulation analysis on manipulator, obtaining parameter curves of the manipulator such as position, speed and torque, which verifies it feasible to use manipulator to unload and load gems, achieving the design requirements.

Study on Kinematics Simulation of Multi-Joint Robotic Gripper Based on ADAMS

2013 ◽  
Vol 444-445 ◽  
pp. 1384-1388
Author(s):  
Bin Hua ◽  
Yi Lin Chi ◽  
Xue Jun Wang ◽  
Quan Bai ◽  
Wei Zhong
Keyword(s):  
Simulation Analysis ◽  
Geometric Model ◽  
Characteristic Curve ◽  
Three Dimensional ◽  
Virtual Prototype ◽  
Prototype Model ◽  
Three Dimensional Model ◽  
Improve Design ◽  
Kinematics Simulation ◽  
Adams Software

The article describes how we can use the virtual prototyping technology validate mechanism design of multi-joint manipulator and its grabbing performance and loading abilities per minute. It completes the three-dimensional model of virtual prototype with Solid Edge ST5, and be imported into ADAMS software. And then the manipulator kinematics simulation is carried out in ADAMS. Using the kinematics simulation technology of ADAMS, we can get the various joints in a working cycle of the displacement characteristic curve, the velocity and acceleration curves of working conditions. This paper introduces how to establish the geometric model of articulated robot virtual prototype model. And some key technology details such as adding a constraint to model are also described. Kinematics simulation analysis of the manipulator with ADAMS software can greatly shorten the design cycle, improve design accuracy and reduce the cost of product development.

Simulation Analysis of Pneumatic on-off Pressure Mechanism on Printing Press

2010 ◽  
Vol 154-155 ◽  
pp. 1481-1484 ◽  
Author(s):  
Jun Zhong Guo ◽  
Jun Ping Yang
Keyword(s):  
Kinematic Analysis ◽  
Simulation Analysis ◽  
Angular Displacement ◽  
Three Dimensional ◽  
Printing Press ◽  
Work Demand ◽  
Analysis Process ◽  
Adams Software ◽  
Important Basis

The on-off pressure mechanism has an important function to the printing press, the quality of which concerns the working performance of the printing machine and the quality of printed products directly. In this paper, the pneumatic on-off pressure mechanism is discussed; the work demand of order on-off pressure is analyzed. In addition, the three-dimensional digital model and the kinematic analysis process can be achieved on the basis of ADAMS software. What’s more, the on pressure value in the process of on pressure is derived from the kinematic analysis. Lastly, the relation between the motion of on-off pressure mechanism and cylinder’s angular displacement is analyzed, an important basis to the on-off pressure mechanism’s optimal design will be provided.

Modeling and Simulation on Knowledge Transfer among Unofficial Groups Based on Communication Networks

2013 ◽  
Vol 411-414 ◽  
pp. 145-151
Author(s):  
Xiao Dong Kou ◽  
Bo Zhang ◽  
Lin Yang
Keyword(s):  
Knowledge Transfer ◽  
Complex Networks ◽  
Communication Networks ◽  
Simulation Analysis ◽  
China National Knowledge Infrastructure ◽  
Simulation Research ◽  
Knowledge Infrastructure ◽  
Learned Societies ◽  
Agent Simulation ◽  
Multi Agent

With features of good interactivity and fast spread speed, unofficial networks play a significant role in knowledge transfer. Based on theories of communication networks and computational modeling method, the transfer situation of complex networks theory within Chinas learned societies, including its rising, spread and development, was modeled and then made simulation analysis by using the Blanche software. By comparing the analysis results with periodicals data from China National Knowledge Infrastructure, the effectiveness of the built model and the reliability of Blanche in multi-agent simulation research are all validated. Furthermore, the future development of complex networks theory in China is predicted as well.

Simulation Research on Stress – Damage Law of the Blood Cells

2012 ◽  
Vol 482-484 ◽  
pp. 776-779
Author(s):  
Xiong Xie ◽  
Jian Ping Tan
Keyword(s):  
Blood Cell ◽  
External Force ◽  
Blood Cells ◽  
Simulation Analysis ◽  
Artificial Organs ◽  
Simulation Research ◽  
Axial Diameter ◽  
Concave Shape ◽  
Damage Law ◽  
Stress Damage

Through simulation analysis of the blood cell by Abques under the function of the different pressures, the change of the cell’s axial diameter and the importance of the effect of external force and double concave shape on the erythrocyte’s deformability are obtained. It lays the foundation for the research artificial organs lubrication.

Dynamic Simulation Analysis of the Crane Hoisting Process Based on Adams

2014 ◽  
Vol 940 ◽  
pp. 132-135 ◽  
Author(s):  
Yi Fan Zhao ◽  
Ling Sha ◽  
Yi Zhu
Keyword(s):  
Dynamic Simulation ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Wire Rope ◽  
Dynamics Simulation ◽  
Dimensional Model ◽  
Analysis Model ◽  
Three Dimensional Model ◽  
Adams Software ◽  
Simulation Results

Established the dynamics simulation analysis model of crane hoisting mechanism based on the theory of dynamics in Adams software, and then through the three dimensional model of lifting mechanism dynamics entities, the constraints, load, drive can be added, the motion law can be defined to simulation analysis the change of the force of wire rope, the change of displacement, velocity and acceleration of lifting weight in the lifting process. On the basis of the simulation results, it can make a great improvement for the structure of crane and provide a meaningful theoretical reference for the hoisting machinery innovation design.

Analysis of Commercial Vehicle Thrust Rod Load Simulation

2015 ◽  
Vol 713-715 ◽  
pp. 159-163
Author(s):  
Guo Yu Feng ◽  
Wen Ku Shi ◽  
Jun Ke ◽  
Lu Lu Guo
Keyword(s):  
Dimensional Space ◽  
Three Dimensional ◽  
Time History ◽  
Prototype Model ◽  
Superposition Method ◽  
Adams Software ◽  
Lower Load ◽  
Multi Body ◽  
Load Simulation ◽  
Three Dimensional Space

In order to obtain the accurate thrust rod load, based on the theory of multi body dynamics, establish the complete vehicle virtual prototype model by using ADAMS software, the dynamic simulation of the thrust rod load time history. Combined with MATLAB software to build three-dimensional space pavement model with harmonic superposition method, obtaining the thrust rod load under different conditions, the simulation results show that, the vehicle loaded with uphill turn thrust rod by the load of the largest, and bear in various working upper thrust rod load than the lower load. Consistent with the experimental results, illustrate the modeling method is correct, can quickly and accurately obtain the thrust rod load.

Study on Dynamic Simulation of Wind Turbine Gearbox Based on Pro/E and ADAMS

2014 ◽  
Vol 644-650 ◽  
pp. 442-445
Author(s):  
Wen Zhi Yang ◽  
Ju Feng Cao ◽  
Wei Zhang
Keyword(s):  
Wind Turbine ◽  
Virtual Prototype ◽  
Prototype Model ◽  
Solid Model ◽  
Wind Turbine Gearbox ◽  
Adams Simulation ◽  
Adams Software ◽  
Box Structure ◽  
Virtual Prototyping Technology ◽  
Necessary Constraints

Domestic wind turbines with 1.5MW gearbox as the research object, application of virtual prototyping technology (ADAMS) simulation of dynamics of wind turbine gearbox when braking .According to research gear box structure, size and other parameters, using Pro / E software to create a solid model of wind turbine gearboxes. After importing to the ADAMS software, add the necessary constraints and loads, virtual prototype model of the gearbox is established. The simulation of dynamics of wind turbine gearbox are carried out by using ADAMS, and the angular velocity of the in-out shaft, gear meshing force and the vibration when braking cloud are obtained. That result is match with the theoretical value through analysis and the accuracy of ADAMS simulation is verified. The simulation results show that the design level of wind turbine gearboxes can be improved by using the virtual prototype technology and lay a good foundation for further design.

Rocker Arm Force Analysis of Crown-Block Heave Compensation System Based on ADAMS

2017 ◽  
Vol 872 ◽  
pp. 266-270
Author(s):  
Zhen Dong Liu ◽  
Yan Ting Zhang ◽  
Lu Meng Huang ◽  
Kang Wang ◽  
Ming Bin Shi
Keyword(s):  
Simulation Analysis ◽  
System Control ◽  
Load Variation ◽  
Control Precision ◽  
Offset Distance ◽  
Small Load ◽  
Swing Arm ◽  
Adams Software ◽  
Variation Range ◽  
High Control

This paper compares three common installation ways of swing arm and carries out simulation analysis by using Adams software. The research results show that when using intercrossed enwinding wirerope, the swing arm will bear alternating load and the load variation range is huge, load G’ will change obviously and bring great impact on system control precision. When using along enwinding wirerope, the swing arm’s load is slightly bigger than wirerope tension and the load variation range is very small, load G’ will be static and it’s easy to get high control precision. By reducing the length of lower swing arm, increasing the length of upper swing arm and the offset distance, its working condition can be improved when using intercrossed enwinding wirerope.

Sign in / Sign up

Export Citation Format

Share Document