Effect of Magnesium Coating Prior to Lithium Loading over SBA-15 for Stabilization of its Mesostructure

2014 ◽  
Vol 917 ◽  
pp. 3-9
Author(s):  
Muhammad Ayoub ◽  
Ahmad Zuhairi Abdullah
Keyword(s):  
Pore Size ◽  
Pore Volume ◽  
Mesoporous Material ◽  
Mesoporous Structure ◽  
Electron Microscopic ◽  
Tem Analysis ◽  
Transmission Electron ◽  
Transmission Electron Microscopic ◽  
The Stability ◽  
Basic Strength

Mesoporous material SBA-15 was synthesized using P123 and TEMOS as the templates. Lithium in the form of LiOH was loaded over a previously prepared SBA-15. The basic strength of the prepared samples of SBA-15 was found to increase but the mesoporous structure was severely destroyed. The mesoporous structure of the prepared SBA-15 was retained after coating it with 30 wt. % magnesium prior to LiOH loading. The stability of mesoporous structure was strongly influenced by the extent of magnesium coating. It was also noted that this structure was also affected by LiOH loading and significantly destroyed structure when magnesium coating value exceeded 20 %. These samples were thoroughly characterized for their surface area, pore volume, pore size, basic strength, SAXRD patterns and transmission electron microscopic (TEM) analysis.

scholarly journals Bio-conjugated silver nano-materials and shape-directing role of cetyltrimethylammonium bromide

2013 ◽  
Vol 2 (1) ◽  
pp. 57-67 ◽  
Author(s):  
Zaheer Khan ◽  
Qamer Faisal ◽  
Rabia Ahmad
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
Electron Microscopic ◽  
Tem Analysis ◽  
Alstonia Scholaris ◽  
Irregular Shapes ◽  
Transmission Electron ◽  
Electron Microscopic Technique ◽  
Visible Spectra ◽  
Transmission Electron Microscopic ◽  
20 Nm

Conventional UV-visible spectrophotometric and transmission electron microscopic technique were used to determine the morphology of silver nanoplates (AgNP) using Alstonia scholaris aqueous leaves extract for the first time. The visible spectra showed the presence of three well defined surface plasmon absorption (SRP) bands at 500, 550 and 675 nm which attributed to the anisotropic growth of Ag-nanoplates. Transmission electron microscopic (TEM) analysis of AgNP showed formation of truncated triangular, polyhedral with some irregular shapes nanoplates in the size range 7-20 nm. Cetyltrimethylammonium bromide (CTAB) has no significant effect on the shape of the spectra, position of SRP bands, size and the size distribution of AgNP. Effects of various [CTAB] were also discussed in the green extra-cellular synthesis of AgNP using Alstonia scholaris leaves extract.

Preparation and Loading Process of Single Crystalline Samples into a Gas Environmental Cell Holder for In Situ Atomic Resolution Scanning Transmission Electron Microscopic Observation

2016 ◽  
Vol 22 (3) ◽  
pp. 515-519 ◽  
Author(s):  
Rainer Straubinger ◽  
Andreas Beyer ◽  
Kerstin Volz
Keyword(s):  
Ion Beam ◽  
Electron Microscopic Observation ◽  
Atomic Resolution ◽  
Electron Microscopic ◽  
Tem Analysis ◽  
Single Crystalline ◽  
Transmission Electron ◽  
Transmission Electron Microscopic ◽  
Environmental Cell

AbstractA reproducible way to transfer a single crystalline sample into a gas environmental cell holder for in situ transmission electron microscopic (TEM) analysis is shown in this study. As in situ holders have only single-tilt capability, it is necessary to prepare the sample precisely along a specific zone axis. This can be achieved by a very accurate focused ion beam lift-out preparation. We show a step-by-step procedure to prepare the sample and transfer it into the gas environmental cell. The sample material is a GaP/Ga(NAsP)/GaP multi-quantum well structure on Si. Scanning TEM observations prove that it is possible to achieve atomic resolution at very high temperatures in a nitrogen environment of 100,000 Pa.

TEM Analysis of Long-Period Polytypes in SiC—S

1976 ◽  
Vol 34 ◽  
pp. 630-631
Author(s):  
S. Shinozaki ◽  
J. W. Sprys
Keyword(s):  
Electron Diffraction ◽  
Isothermal Annealing ◽  
Tem Analysis ◽  
Long Period ◽  
Transmission Electron ◽  
Average Grain Size ◽  
High Resolution Tem ◽  
Structural Lattice ◽  
The Stability ◽  
Continuous Curves

In reaction sintered SiC (∽ 5um average grain size), about 15% of the grains were found to have long-period structures, which were identifiable by transmission electron microscopy (TEM). In order to investigate the stability of the long-period polytypes at high temperature, crystal structures as well as microstructural changes in the long-period polytypes were analyzed as a function of time in isothermal annealing.Each polytype was analyzed by two methods: (1) Electron diffraction, and (2) Electron micrograph analysis. Fig. 1 shows microdensitometer traces of ED patterns (continuous curves) and calculated intensities (vertical lines) along 10.l row for 6H and 84R (Ramsdell notation). Intensity distributions were calculated based on the Zhdanov notation of (33) for 6H and [ (33)3 (32)2 ]3 for 84R. Because of the dynamical effect in electron diffraction, the observed intensities do not exactly coincide with those intensities obtained by structure factor calculations. Fig. 2 shows the high resolution TEM micrographs, where the striped patterns correspond to direct resolution of the structural lattice periodicities of 6H and 84R structures and the spacings shown in the figures are as expected for those structures.

The blister of porphyria cutanea tarda: A Scanning and Transmission Electron Microscopic study

1986 ◽  
Vol 44 ◽  
pp. 334-335
Author(s):  
Veronika Burmeister ◽  
R. Swaminathan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Basement Membrane ◽  
Middle Age ◽  
Porphyria Cutanea Tarda ◽  
Minor Trauma ◽  
Electron Microscopic ◽  
Transmission Electron Microscopic Study ◽  
Transmission Electron ◽  
Transmission Electron Microscopic

Porphyria cutanea tarda (PCT) is a disorder of porphyrin metabolism which occurs most often during middle age. The disease is characterized by excessive production of uroporphyrin which causes photosensitivity and skin eruptions on hands and arms, due to minor trauma and exposure to sunlight. The pathology of the blister is well known, being subepidermal with epidermodermal separation, it is not always absolutely clear, whether the basal lamina is attached to the epidermis or the dermis. The purpose of our investigation was to study the attachment of the basement membrane in the blister by comparing scanning with transmission electron microscopy.

TEM comparison of osmium vs osmium with potassium ferricyanide secondary fixatives and the impact of secondary fixative temperature on tissue preservation/contrast quality

1996 ◽  
Vol 54 ◽  
pp. 910-911
Author(s):  
J. W. Horn ◽  
B. J. Dovey-Hartman ◽  
V. P. Meador
Keyword(s):  
Osmium Tetroxide ◽  
Potassium Ferricyanide ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Microscopic Evaluation ◽  
Cacodylate Buffer ◽  
Transmission Electron Microscopic ◽  
Glutaraldehyde Solution ◽  
Temperature Impact ◽  
The Impact

Osmium tetroxide (OsO4) is a universally used secondary fixative for routine transmission electron microscopic evaluation of biological specimens. Use of OsO4 results in good ultrastructural preservation and electron density but several factors, such as concentration, length of exposure, and temperature, impact overall results. Potassium ferricyanide, an additive used primarily in combination with OsO4, has mainly been used to enhance the contrast of lipids, glycogen, cell membranes, and membranous organelles. The purpose of this project was to compare the secondary fixative solutions, OsO4 vs. OsO4 with potassium ferricyanide, and secondary fixative temperature for determining which combination gives optimal ultrastructural fixation and enhanced organelle staining/contrast.Fresh rat liver samples were diced to ∼1 mm3 blocks, placed into porous processing capsules/baskets, preserved in buffered 2% formaldehyde/2.5% glutaraldehyde solution, and rinsed with 0.12 M cacodylate buffer (pH 7.2). Tissue processing capsules were separated (3 capsules/secondary fixative.solution) and secondarily fixed (table) for 90 minutes. Tissues were buffer rinsed, dehydrated with ascending concentrations of ethanol solutions, infiltrated, and embedded in epoxy resin.

Radial mass analysis of unstained STEM images of molluscan hemocyanins

1990 ◽  
Vol 48 (3) ◽  
pp. 810-811
Author(s):  
M.G. Hamilton ◽  
T.T. Herskovits ◽  
J.S. Wall
Keyword(s):  
Image Analysis ◽  
Hollow Cylinder ◽  
Electron Micrographs ◽  
Side View ◽  
Mass Analysis ◽  
Mass Measurements ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Transmission Electron Microscopic ◽  
Microscopic Studies

The hemocyanins of molluscs are aggregates of a cylindrical decameric subparticle that assembles into di-, tri-, tetra-, penta-, and larger multi-decameric particles with masses that are multiples of the 4.4 Md decamer. Electron micrographs of these hemocyanins typically show the particles with two profiles: circular representing the cylinder viewed from the end and rectangular representing the side-view of the hollow cylinder.The model proposed by Mellema and Klug from image analysis of a didecameric hemocyanin with the two decamers facing one another with collar (closed) ends outward fits the appearance of side-views of the negatively-stained cylinders. These authors also suggested that there might be caps at the ends. In one of a series of transmission electron microscopic studies of molluscan hemocyanins, Siezen and Van Bruggen supported the Mellema-Klug model, but stated that they had never observed a cap component. With STEM we have tested the end cap hypothesis by direct mass measurements across the end-views of unstained particles.

Transmission Electron Microscopic Observations of Al3Li and Al3Ti Precipitation in A Rapidly Solidified Al-3Li-0.2Ti ALLOY

1980 ◽  
Vol 38 ◽  
pp. 336-337
Author(s):  
J. E. O’Neal ◽  
K. K. Sankaran ◽  
S. M. L. Sastry
Keyword(s):  
Rapid Solidification ◽  
Metallic Substrate ◽  
Deformation Characteristics ◽  
Phase Decomposition ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Supersaturated Solid Solutions ◽  
Transmission Electron Microscopic ◽  
Rapidly Solidified ◽  
Microstructural Homogeneity

Rapid solidification of a molten, multicomponent alloy against a metallic substrate promotes greater microstructural homogeneity and greater solid solubility of alloying elements than can be achieved by slower-cooling casting methods. The supersaturated solid solutions produced by rapid solidification can be subsequently annealed to precipitate, by controlled phase decomposition, uniform 10-100 nm precipitates or dispersoids. TEM studies were made of the precipitation of metastable Al3Li(δ’) and equilibrium AL3H phases and the deformation characteristics of a rapidly solidified Al-3Li-0.2Ti alloy.

Formation of coherent twins in YBa2Cu3O7–δ superconductors

1989 ◽  
Vol 4 (4) ◽  
pp. 795-801 ◽  
Author(s):  
C. J. Jou ◽  
J. Washburn
Keyword(s):  
Oxygen Uptake ◽  
Growth Mechanism ◽  
Oxygen Uptake Rate ◽  
Nucleation And Growth ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Transmission Electron Microscopic ◽  
Twin Formation ◽  
Boundary Model ◽  
Nucleation And Growth Mechanism

A nucleation-and-growth mechanism for the twin formation in YBa2Cu3O7–δ superconductors based on the oxygen uptake rate curve and published transmission electron microscopic observations is proposed together with an oxygen-depleted twin boundary model. The difficulty of reaching stoichiometric YBa2Cu3O7 is explained.

Sign in / Sign up

Export Citation Format

Share Document