Morphology and Mechanical Properties of NiZn Ferrite/Thermoplastic Natural Rubber Composite

2014 ◽  
Vol 925 ◽  
pp. 308-312 ◽  
Author(s):  
Mou'ad A. Tarawneh ◽  
Sahrim Haji Ahmad ◽  
Yu Li Jiun ◽  
Radwan Dweiri ◽  
Ibrahim N. Hassan
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Mechanical Test ◽  
Polymer Nanocomposite ◽  
Dynamic Mechanical Properties ◽  
Filler Loading ◽  
Rubber Matrix ◽  
Dynamic Mechanical ◽  
Blending Method ◽  
Thermoplastic Natural Rubber

In this paper the polymer nanocomposite of nickel zinc (NiZn) ferrite nanoparticles incorporated into the thermoplastic natural rubber nanocomposite (TPNR) were prepared via melt blending method. The effect of different NiZn loading (2-10 wt%) on morphology, tensile and dynamic mechanical properties of the obtained composites was investigated. It was found that NiZn ferrite is well dispersed in the thermoplastic natural rubber matrix. The tensile results indicated that filler loading has improved the tensile strength and Youngs modulus of the nanocomposite. However, the elongation at break decreased with increasing the percentage of NiZn. Dynamic mechanical test showed that the highest storage modulus is at 8 wt% filler. Any further increment of the filler content leads to the formation of agglomerate hence affecting the properties. The Scanning electron micrograph (SEM) micrographs reveal aspect ratio and filler orientation in the TPNR matrix also strongly promoted interfacial adhesion between the filler and the matrix to control its properties.

scholarly journals Dynamic Mechanical Properties of Vietnam Modified Natural Rubber via Grafting with Styrene

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
T. A. Dung ◽  
N. T. Nhan ◽  
N. T. Thuong ◽  
D. Q. Viet ◽  
N. H. Tung ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Graft Copolymer ◽  
Graft Copolymerization ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical ◽  
Tert Butyl Hydroperoxide ◽  
Wide Range ◽  
Redox Initiator ◽  
Tetraethylene Pentamine

The dynamic mechanical behavior of modified deproteinized natural rubber (DPNR) prepared by graft copolymerization with various styrene contents was investigated at a wide range of temperatures. Graft copolymerization of styrene onto DPNR was performed in latex stage using tert-butyl hydroperoxide (TBHPO) and tetraethylene pentamine (TEPA) as redox initiator. The mechanical properties were measured by tensile test and the viscoelastic properties of the resulting graft copolymers at wide range of temperature and frequency were investigated. It was found that the tensile strength depends on the grafted polystyrene; meanwhile the dynamic mechanical properties of the modification of DPNR meaningfully improved with the increasing of both homopolystyrene and grafted polystyrene compared to DPNR. The dynamic mechanical properties of graft copolymer over a large time scale were studied by constructing the master curves. The value of bT has been used to prove the energetic and entropic elasticity of the graft copolymer.

Mechanical and dynamic mechanical properties of polystyrene composites reinforced with cellulose fibers

2015 ◽  
Vol 30 (9) ◽  
pp. 1242-1254 ◽  
Author(s):  
Matheus Poletto ◽  
Ademir J Zattera
Keyword(s):  
Mechanical Properties ◽  
Coupling Agent ◽  
Interfacial Adhesion ◽  
Cellulose Fiber ◽  
Cellulose Fibers ◽  
Dynamic Mechanical Properties ◽  
Filler Loading ◽  
Fixed Amount ◽  
Dynamic Mechanical ◽  
Damping Peak

The mechanical and dynamic mechanical properties of cellulose fibers-reinforced polystyrene composites were investigated as a function of cellulose fiber content and coupling agent effect. The composites were prepared using a corotating twin-screw extruder and after injection molding. Three levels of filler loading (10, 20, and 30 wt%) and a fixed amount of coupling agent (2 wt%) were used. The results showed that a cellulose fiber loading of more than 20 wt% caused decrease in the mechanical properties. The addition of coupling agent substantially improves the mechanical and dynamic mechanical properties. The use of coupling agent improved the storage modulus and reduced the damping peak values of the composites due to the improved interfacial adhesion. The height of the damping peak was found to be dependent on the content of cellulose fiber and the interfacial adhesion between fiber and matrix. The adhesion factor values confirm that the better adhesion occurs when coupling agent is used.

Properties enhancement in multiwalled carbon nanotube-magnetite hybrid-filled polypropylene natural rubber nanocomposites through functionalization and processing methods

2016 ◽  
Vol 23 (3) ◽  
pp. 257-267 ◽  
Author(s):  
Ing Kong ◽  
Sahrim Haji Ahmad ◽  
Robert Shanks
Keyword(s):  
Thermal Stability ◽  
Natural Rubber ◽  
Nucleating Agent ◽  
Dynamic Mechanical Properties ◽  
Morphological Properties ◽  
Multiwalled Carbon ◽  
Dynamic Mechanical ◽  
Pristine Mwcnts ◽  
Blending Method ◽  
Ball Milling Technique

AbstractThe effect of multiwalled carbon nanotubes (MWCNTs)-magnetite (Fe3O4) hybrid content on the thermal, dynamic mechanical, and morphological properties of thermoplastic natural rubber (TPNR) nanocomposites was evaluated. TPNR/filler nanocomposites were prepared using a melt-blending method with a ball-milling technique as a premixed process. The acid treatment successfully shortened the lengths and disentangled the crowds of MWCNTs, which led to a better dispersion of MWCNTs in the polymer matrix, as revealed by optical microscopy and scanning electron microscopy. The improved dispersion of acid-treated MWCNTs-Fe3O4 in the TPNR matrix and the enhanced interfacial adhesion between acid-treated MWCNTs-Fe3O4 and the TPNR matrix increased the thermal stability and dynamic mechanical properties. Acid-treated MWCNTs acted as radical scavengers, which helped delay the onset of thermal degradation and hence improved the thermal stability. As expected, MWCNTs played a role as the nucleating agent in the TPNR matrix; however, the effect was more pronounced for the TPNR matrix containing pristine MWCNTs.

Mixing Methods Influencing on Properties of Epoxidized Natural Rubber/Polypropylene Thermoplastic Vulcanizates

2013 ◽  
Vol 844 ◽  
pp. 109-112 ◽  
Author(s):  
Chesidi Hayichelaeh ◽  
Charoen Nakason ◽  
Anoma Thitithammawong
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Dynamic Mechanical Properties ◽  
Epoxidized Natural Rubber ◽  
Melt Mixing ◽  
Dynamic Mechanical ◽  
Thermoplastic Vulcanizates ◽  
Mixing Method ◽  
Internal Mixer

Epoxidized natural rubber (ENR)/Polypropylene (PP) thermoplastic vulcanizates were prepared by melt mixing method in an internal mixer. Influences of different mixing methods for incorporation of processing oil into the TPVs on tensile and dynamic mechanical properties of the TPVs and crystallinity of the PP were investigated. Results show that distribution of processing oil in the ENR/PP TPV is important due to the processing oil can promote and in the same time can interrupt an improvement in elastomeric properties of the TPV. Incorporation of processing oil into the ENR phase by preparation of oil extended ENR (the mixing method 1) before mixing with the PP was the better way to produce the TPV. It promoted the TPV with superior tensile and dynamic mechanical properties than the TPVs prepared from the mixing method 2 and 3 in which the processing oil was directly added into the PP phase. Furthermore, the TPV from the mixing method 1 had less effect of processing oil on the PP crystallization.

Preparation and Characterization of Nanocrystalline Cellulose/Natural Rubber (NCC/Nr) Composites

2013 ◽  
Vol 712-715 ◽  
pp. 111-114 ◽  
Author(s):  
Tian Ming Gao ◽  
Mao Fang Huang ◽  
Rui Hong Xie ◽  
Hong Lian Chen
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Natural Rubber Latex ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Nanocrystalline Cellulose ◽  
Rubber Latex ◽  
Dynamic Mechanical ◽  
Surface Modified

Surface modified nanocrystalline cellulose (NCC) was prepared by silicon-69, and then blended into natural rubber latex to prepare nanocomposites. The nanocomposites properties of tensile properties, tear strength, morphology and thermal dynamic mechanical properties were measured by mechanical property testing, scanning electron microscopy (SEM), and dynamic mechanical analysis (DMA), respectively. The results showed that modified NCC is homogeneously distributed throughout NR matrix, which leads to the enhancement on mechanical properties. Moreover, the storage modulus (E) of modified nanocellulose filled NR is higher than unmodified nanocellulose filled NR, and the tanδ is reversed.

Sign in / Sign up

Export Citation Format

Share Document