Hydrothermal Synthesis and Characterization of Ho Doped Bi2MoO6 Nanoplates and their Optical Properties

2014 ◽  
Vol 931-932 ◽  
pp. 231-234 ◽  
Author(s):  
Anukorn Phuruangrat ◽  
Nuengruethai Ekthammathat ◽  
Budsabong Kuntalue ◽  
Phattharanit Dumrongrojthanath ◽  
Somchai Thongtem ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Hydrothermal Reaction ◽  
Visible Region ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Uv Visible ◽  
Bending Modes

0–3 % Ho doped Bi2MoO6 samples were synthesized by hydrothermal reaction at 180 °C for 20 h. Their phase, morphologies, atomic vibration and optical properties were characterized by X-ray powder diffraction (XRD), Raman spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and UV-visible spectroscopy. In this research, the products were orthorhombic Bi2MoO6 nanoplates with asymmetric and symmetric stretching and bending modes of MoO6 octahedrons, and their strong absorption in the UV visible region.

scholarly journals Hydrothermal Synthesis, Characterization, and Optical Properties of Ce Doped Bi2MoO6Nanoplates

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Anukorn Phuruangrat ◽  
Nuengruethai Ekthammathat ◽  
Budsabong Kuntalue ◽  
Phattranit Dumrongrojthanath ◽  
Somchai Thongtem ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Hydrothermal Reaction ◽  
Growth Direction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Uv Visible ◽  
Bending Modes

Undoped and Ce doped Bi2MoO6samples were synthesized by hydrothermal reaction at 180°C for 20 h. Phase, morphology, atomic vibration, and optical properties were characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectrophotometry, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and UV-visible spectroscopy. In this research, the products were orthorhombic Bi2MoO6nanoplates with the growth direction along the [0b0], including the asymmetric and symmetric stretching and bending modes of Bi–O and Mo–O. Undoped and Ce doped Bi2MoO6samples show a strong absorption in the UV region.

Preparation and Characterization of Helical Structure ZnS by Solvothermal Method

2011 ◽  
Vol 233-235 ◽  
pp. 1954-1957
Author(s):  
Xiao Yan Yan ◽  
Zhi Qiang Wei ◽  
Li Gang Liu ◽  
Xiao Juan Wu ◽  
Ge Zhang
Keyword(s):  
Electron Microscopy ◽  
Solvothermal Method ◽  
Helical Structure ◽  
Sodium Sulphide ◽  
X Ray Diffraction ◽  
Hexagonal Crystal ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron

Helical structure ZnS were successfully prepared via solvothermal method by the reaction of zinc acetate and sodium sulphide. The composition, morphology, and microstructure of the sample were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), the corresponding selected area electron diffraction (SAED) and X-ray energy spectrum (EDS). The experiment results show that the sample is 1-D hexagonal crystal ZnS and grows along the [002] direction, and is helical structure, with lengths in the range of 100-200 nm, the diameter about 5-15 nm, and pitch about 20nm.

scholarly journals Solvent-Mediated Eco-Friendly Synthesis and Characterization of Monodispersed Bimetallic Ag/Pd Nanocomposites for Sensing and Raman Scattering Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
G. Sathiyadevi ◽  
B. Loganathan ◽  
B. Karthikeyan
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Dimethyl Formamide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Bimetallic Nanocomposites ◽  
Ft Ir

The solvent-mediated eco-friendly monodispersed Ag/Pd bimetallic nanocomposites (BNCs) having thick core and thin shell have been prepared through novel green chemical solvent reduction method. Reducing solvent, dimethyl formamide (DMF) is employed for the controlled green synthesis. Characterization of the synthesized Ag/Pd BNCs has been done by x-ray diffraction (XRD) studies, high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray analysis (EDX), and high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) pattern. The nature of the interaction of L-cysteine with Ag/Pd BNCs has been studied by using surface plasmon spectroscopy, Fourier transform-infrared spectroscopy (FT-IR), cyclic voltammetry (CV), and theoretical methods.

Synthesis and optical properties of composites based on ZnS nanoparticles embedded in layered magadiite

Clay Minerals ◽  
2013 ◽  
Vol 48 (5) ◽  
pp. 739-748 ◽  
Author(s):  
Yufeng Chen ◽  
Gensheng Yu
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Interlayer Space ◽  
Transmission Spectra ◽  
Zns Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Uv Visible ◽  
Photoluminescence Enhancement ◽  
Properties Of Composites

AbstractComposites based on ZnS nanparticles embedded in layered magadiite were synthesized via a three step process : protonation of Na-magadiite, ion exchange in order to introduce Zn(NH3)42+ in the interlayer space, and addition of Na2S to form ZnS particles in the interlayer space of magadiite. The composites obtained were characterized by X-ray power diffraction (XRD), Scanning Electron Microscopy coupled with Energy Dispersive Spectroscopy (SEM-EDS), Transmission Electron Microscopy (TEM), Raman spectroscopy, Photoluminscence spectra (PL), and UV-visible transmission spectra (UV-vis). Results indicated that ZnS nanoparticles embedded in magadiite presented different optical properties and photoluminescence enhancement properties compared with those of uncovered ZnS particles (without host magadiite).

Nanocrystalline and stacking-disordered β-cristobalite AlPO4 chemically stabilized at room temperature: synthesis, physical characterization, and X-ray powder diffraction data

2017 ◽  
Vol 32 (S1) ◽  
pp. S193-S200
Author(s):  
B. Peplinski ◽  
B. Adamczyk ◽  
P. Formanek ◽  
C. Meyer ◽  
O. Krüger ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Powder Diffraction ◽  
Title Compound ◽  
Room Temperature ◽  
Optical Emission ◽  
Xrd Pattern ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron

This paper reports the first successful synthesis and the structural characterization of nanocrystalline and stacking-disordered β-cristobalite AlPO4 that is chemically stabilized down to room temperature and free of crystalline impurity phases. Several batches of the title compound were synthesized and thoroughly characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy, selected area electron diffraction, energy dispersive X-ray spectroscopy mapping in SEM, solid-state 31P nuclear magnetic resonance (31P-NMR) spectroscopy including the TRAPDOR method, differential thermal analysis (DTA), gas-sorption methods, optical emission spectroscopy, X-ray fluorescence spectroscopy, and ion chromatography. Parameters that are critical for the synthesis were identified and optimized. The synthesis procedure yields reproducible results and is well documented. A high-quality XRD pattern of the title compound is presented, which was collected with monochromatic copper radiation at room temperature in a wide 2θ range of 5°–100°.

Hydrothermal Synthesis and Characterization of Single-Crystal Lead Titanate Nanoflakes

2010 ◽  
Vol 152-153 ◽  
pp. 1222-1226
Author(s):  
Yong Gang Wang ◽  
Lin Lin Yang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang ◽  
Gao Rong Han
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Crystal ◽  
Lead Titanate ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
High Resolution Tem

Single-crystal PbTiO3 nanoflakes have been synthesized successfully by a hydrothermal method. The as-prepared powders were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and selected area electron diffraction (SAED). It was found that KOH concentration played a key role in the growth of single-crystal tetragonal perovskite PbTiO3 nanoflakes, and the morphology of PbTiO3 crystallites can be controlled by adjusting the KOH concentration.

Characteristics of SnO2 One-Dimensional Nanomaterials Synthesized on TiN-Coated Substrates by the Evaporation of Sn Powders

2006 ◽  
Vol 510-511 ◽  
pp. 658-661
Author(s):  
Hyoun Woo Kim ◽  
S.H. Shim ◽  
Ju Hyun Myung
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Visible Region ◽  
Optoelectronic Devices ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
One Dimensional ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron

One-dimensional structures of tin oxide (SnO2) on TiN-coated substrates were obtained by simple heating of Sn powders. X-ray diffraction, high-resolution transmission electron microscopy, and the selected area electron diffraction showed that 1D structures are composed of SnO2 with rutile structure. The photoluminescence of the structures in the visible region suggests possible applications in nanoscaled optoelectronic devices.

Synthesis and Characterization of Nanosized Cu/ZnO Catalyst by Polyol Method

2008 ◽  
Vol 8 (2) ◽  
pp. 874-877 ◽  
Author(s):  
Tuba Gürkaynak Altınçekiç ◽  
Ismail Boz ◽  
Selçuk Aktürk
Keyword(s):  
Electron Microscopy ◽  
Metallic Copper ◽  
Average Crystallite Size ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Nanosized Catalysts ◽  
Scanning Electron

Nanosized catalysts composed of metallic copper supported on zinc oxide have been synthesized by the polyol process. Average crystallite size of copper was between 10 and 45 nm. Cu/ZnO catalyst particles were characterized by various techniques, such as X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), and dynamic light scattering analysis (DLS).

The Optical Properties of β-Cyclodextrin-Assisted Synthesize Worm-Like Ag2S by One Step Hydrothermal Method

2018 ◽  
Vol 53 ◽  
pp. 7-12
Author(s):  
Mao Hua Li ◽  
Xiao Fei Li ◽  
Wen Sheng Ran ◽  
Bo Yang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Reaction ◽  
Silver Sulfide ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Light Region ◽  
Visible Spectra ◽  
One Step

The worm-like morphology of silver sulfide (Ag2S) was successfully prepared via hydrothermal reaction at 150°C by using silver nitrate (AgNO3) and thioacetamide(CH3CSNH2) as both the sliver sources and sulfur sources, β-cyclodextrin as the template agent, and water as the solvent. The worm-like of Ag2S are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), x-ray photoelectronspectroscopy (XPS), energy dispersivex-ray (EDX), high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SEAD). Ultraviolet-visible spectra (UV-vis) and photoluminescencespectroscopy (PL) were used in an optical study of the products. The results showed that the existence of β-cyclodextrin is crucial to the formation of worm-like Ag2S, and the optoelectronics test results showed that the sample have a broad absorption in ultraviolet and visible light region.

scholarly journals Synthesis and application of pigments based on lanthanide orthoferrites

2020 ◽  
Vol 14 (2) ◽  
pp. 161-167
Author(s):  
Patrícia Pimentel ◽  
Jairo Dutra ◽  
Maria Câmara ◽  
Gerbeson Dantas ◽  
Osmar Bagnato ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Perovskite Phase ◽  
Visible Region ◽  
Ceramic Pigments ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Uv Visible ◽  
Cie Lab

In this work, we synthesized oxides with perovskite LnFeO3 type structure (where Ln = La, Pr and Nd), aiming their use as ceramic pigments. The as-synthesized powders, prepared by gelatin method, were thermally treated at 600 and 800 ?C to obtain the perovskite phase. The characterization was performed using X-ray diffraction technique, followed by Rietveld refinement, scanning and transmission electron microscopy, spectroscopy in the UV-Visible region and CIE Lab colorimetry. The calcined powders were also used for fabrication of ceramic pieces to evaluate the colour when 2 wt.% of the powders was added into a transparent glaze. The pigments presented shades ranging from pale brown for the powdered samples to yellowish when applied in the glazes.

Sign in / Sign up

Export Citation Format

Share Document