Simulation Study on Magnetic Field Characteristics of High Magnetic Field Intensity Permanent Magnet Magnetic Filter

2010 ◽  
Vol 97-101 ◽  
pp. 2622-2627
Author(s):  
Hong Guang Jiao ◽  
Peng Liu ◽  
Zhan Xu Tie
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Magnetic Circuit ◽  
Magnetic Filter ◽  
Circuit Structure ◽  
Magnetic Induction Intensity ◽  
The Magnetic Field ◽  
Outside Diameter

To solve the conflict between separation space and magnetic field intensity, an original magnetic circuit structure system of permanent magnet magnetic filter is designed by utilizing multi-dimensional magnet extrusion technologies, with multi-block NdFeB magnets of different structures and magnetization directions. The inside diameter of the ring magnets and ring soft iron is taken as separating space. To inspect the distribution of the magnetic field characteristics of magnetic circuit system, mathematical model is established, and the designed magnetic circuit system is simulated, taking advantage of the electromagnetic software Magnet. The simulation results show that a larger separating space and higher background magnetic density can be achieved simultaneously by means of the organic magnetic circuit system design, when the thickness of ring soft iron is 4mm and the diameter ratio (outside diameter to the diameter) of ring magnets is 10/3. The highest magnetic induction intensity of 29.2 mm separating space is 1.5T, which provides the basis for permanent magnet magnetic circuit design.

Viscosity Control of Magnetorheological Fluid by Power Saving Magnetizing Mechanism Using Movement of Permanent Magnet

2020 ◽  
Vol 32 (5) ◽  
pp. 977-983
Author(s):  
Jumpei Kawasaki ◽  
Yuki Nakamura ◽  
Yasukazu Sato ◽  
◽  
Keyword(s):  
Magnetic Field ◽  
Power Consumption ◽  
Permanent Magnet ◽  
Electric Power ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Magnetic Circuit ◽  
Angular Position ◽  
Magnetorheological Fluid ◽  
The Magnetic Field

Generally, the magnetic field applied to a magnetorheological fluid (MRF) is generated by electromagnets. Electromagnets consume electric power during MRF magnetization, which is an issue. In this study, we examine two kinds of magnetizing mechanism using a permanent magnet, instead of electromagnets, to save electric power and generate a magnetic field on the MRF. One mechanism linearly moves the permanent magnet into the magnetic circuit composed of yokes. The magnetic field intensity on the MRF is then controlled by changing the overlap between the magnet and the yokes. The other mechanism rotates a permanent magnet in the magnetic circuit. The magnetic field intensity on the MRF is then controlled by changing the relative angular position between the magnet and the yokes. These two mechanisms normally generate force or torque on the magnet toward a magnetically stable position concerning the magnet, and the force or torque causes power consumption to hold and move the magnet. We design herein special magnetic circuits and a cancelation mechanism for the force or torque that drastically reduce the power consumption during the MRF magnetization compared with an electromagnet-type magnetizing device.

Revised reluctance model of the axial magnetic field intensity within giant magnetostrictive rod

2016 ◽  
Vol 231 (14) ◽  
pp. 2718-2729 ◽  
Author(s):  
Xue Guangming ◽  
Zhang Peilin ◽  
He Zhongbo ◽  
Li Xin ◽  
Zeng Wei ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Uniform Distribution ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Magnetic Circuit ◽  
Axial Magnetic Field ◽  
Integral Form ◽  
Giant Magnetostrictive Material ◽  
The Mean ◽  
The Magnetic Field

A theoretical magnetic field intensity model within giant magnetostrictive material was presented. This model was established just like the reluctance model, while could describe the non-uniform distribution flexibly for its integral form. This model employed magnetic circuit theorem calculating the mean of the magnetic field, while used a normalized function describing the distributing character. The distributing function was determined by Biot–Savart law and relative permeability of the material. The model was validated with the help of the experimental device. At last, the fitting degree of the model with the tested results in predicting the performance of the actuator is researched.

Tunable amplified spontaneous emission based on liquid magnetically responsive photonic crystals

2019 ◽  
Vol 7 (13) ◽  
pp. 3740-3743 ◽  
Author(s):  
Ying Li ◽  
Yue Long ◽  
Guoqiang Yang ◽  
Chen-Ho Tung ◽  
Kai Song
Keyword(s):  
Magnetic Field ◽  
Photonic Crystals ◽  
Spontaneous Emission ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Amplified Spontaneous Emission ◽  
The Magnetic Field

The wavelength of amplified spontaneous emission based on liquid magnetically responsive photonic crystals can be tuned by simply changing the magnetic field intensity.

scholarly journals A Novel Method for Improving Low-Temperature Flotation Performance of Nonpolar Oil in the Molybdenite Flotation

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 609 ◽  
Author(s):  
Wan ◽  
Qu ◽  
Li ◽  
He ◽  
Bu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Surface Tension ◽  
Low Temperature ◽  
Interfacial Tension ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Maximum Surface ◽  
Flotation Recovery ◽  
Flotation Performance ◽  
The Magnetic Field

Nonpolar hydrocarbon oil (NHO) is one of the most extensively used collectors in the flotation of molybdenite due to its excellent selectivity. However, NHO has low sensibility at pulp temperature. At low temperatures (<283 K), although more kerosene is used, the recovery of molybdenite flotation is still lower than at room temperature. In this study, magnetizing treatment, which is an efficient, low-cost, innovative, and environmentally friendly emulsification method, was used to improve the flotation performance of NHO in low-temperature molybdenite flotation. The test results showed that, compared with unmagnetized kerosene (UMK), the optimum dosage of magnetized kerosene (MK) could be reduced by 11% at 298 K. At the same dosage of kerosene, the flotation recovery of MK was 3% higher than UMK at 278 K. The surface tension measurement results showed that the surface tension of MK rose periodically as the magnetic field intensity increased, and there was a maximum surface tension within each period. Further, the magnetic field intensity had the maximum flotation recovery of molybdenite at the maximum surface tension of MK. Combined with the analysis based on the Girifalco–Good theory and the static drop volume method of interfacial tension, the interfacial tension of kerosene–water was shown to decrease with the increase of the surface tension of kerosene. This finding indicates that the dispersibility of kerosene in pulp could be improved by reducing the size of oil droplets, thereby improving the molybdenite flotation recovery of kerosene at low-temperature pulp. It is helpful to improve the flotation recovery of molybdenite using NHO as a collector for low-temperature pulp (<283 K).

Viscosity of Potassium Dihydrogen Phosphate Aqueous Solution within Magnetic Field

2017 ◽  
Vol 898 ◽  
pp. 1783-1786
Author(s):  
Lei Zhang ◽  
Yi Su ◽  
Yu Lin Wu ◽  
Yao Liu ◽  
Yong Wang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Aqueous Solution ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Extreme Values ◽  
Potassium Dihydrogen Phosphate ◽  
Experimental Results ◽  
Dihydrogen Phosphate ◽  
Potassium Dihydrogen ◽  
The Magnetic Field

The viscosity of potassium dihydrogen phosphate, KH2PO4 (KDP), aqueous solution within magnetic field was studied. Experimental results showed that, the viscosity of saturated KDP solution exhibited multiple extreme values when the magnetic field intensity increased from 0 Gs to 2250 Gs. Influences of the magnetic field intensity on the viscosity of KDP solution were very complicated. It’s concerned with the temperature and the concentration of solution. As the KDP was produced from aqueous solution within magnetic field, the temperature and the concentration of solution also needed to be carefully controlled. Magnetic field with intensity values of 300 Gs, 600 Gs and 1800 Gs, all have the strong effects on the structures of KDP aqueous solution.

Magnetic Field Analysis of Surface-Mounted Permanent-Magnet Motors

2011 ◽  
Vol 52-54 ◽  
pp. 285-290
Author(s):  
Yi Chang Wu ◽  
Feng Ming Ou ◽  
Bo Wei Lin
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Magnetic Circuit ◽  
Circuit Model ◽  
Field Analysis ◽  
Permanent Magnet Motors ◽  
Element Analysis ◽  
Magnetic Field Analysis ◽  
Field Estimation ◽  
The Magnetic Field

The prediction of the magnetic field is a prerequisite to investigate the motor performance. This paper focuses on the magnetic field estimation of surface-mounted permanent-magnet (SMPM) motors based on two approximations, i.e., the magnetic circuit analysis and the finite-element analysis (FEA). An equivalent magnetic circuit model is applied to analytically evaluate the magnetic field of a SMPM motor with exterior-rotor configuration. The two-dimensional FEA is then applied to numerically calculate the magnetic field and to verify the validity of the magnetic circuit model. The results show that the errors between the analytical predictions and FEA results are less than 6%. It is of benefit to further design purposes and optimization of SMPM motors.

The role of the magnetic field intensity and geometry in the type III burst generation

Solar Physics ◽  
1990 ◽  
Vol 130 (1-2) ◽  
pp. 31-37 ◽  
Author(s):  
P. Zlobec ◽  
V. Ruždjak ◽  
B. Vršnak ◽  
M. Karlický ◽  
M. Messerotti
Keyword(s):  
Magnetic Field ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Type Iii ◽  
The Magnetic Field

Improved the Performance of Focusing Deep Hyperthermia Inductive Heating for Breast Cancer Treatment by Using Ferro-Fluid with Magnetic Shielding System

2013 ◽  
Vol 325-326 ◽  
pp. 353-358 ◽  
Author(s):  
Thosdeekoraphat Thanaset ◽  
Santalunai Samran ◽  
Thongsopa Chanchai
Keyword(s):  
Magnetic Field ◽  
Field Intensity ◽  
Magnetic Fluid ◽  
Magnetic Field Intensity ◽  
Magnetic Shielding ◽  
Inductive Heating ◽  
Surrounding Healthy Tissue ◽  
The Magnetic Field ◽  
Shielding System ◽  
Deep Hyperthermia

The performance improved of focusing deep hyperthermia inductive heating for breast cancer treatment using magnetic fluid nanoparticles with magnetic shielding system has been presented in the paper and the results are discussed. It is a technique challenge in hyperthermia therapy is to control locally heat the tumor region up to an appropriate temperature to destroy cancerous cells, without damaging the surrounding healthy tissue by using magnetic fluid nanoparticles and cylindrical metal shielding with aperture. We show that the magnetic field intensity can be controlled by changing the aperture size to suitable. In addition, the position of the heating can be controlled very well with the magnetic fluid together with shielding system. In the simulation, the inductive applicator is a ferrite core with diameter of 7 cm and excited by 4 MHz signal. Results have shown that the temperature increments depend on the magnetic fluid nanoparticles. In addition, the magnetic field intensity without damaging the surrounding healthy tissue when used magnetic shielded system. These results demonstrate that it is possible to achieve higher temperatures and to focus magnetic field intensity where the nanoparticles and magnetic shielding system are used.

Etude Numérique de la Section Efficace de Diffusion d'un Faisceau Laser par un Plasma en Champ Magnétique. Application à la Détermination Expérimentale de la Direction du Champ Magnétique de Confinement

1973 ◽  
Vol 51 (3) ◽  
pp. 266-276 ◽  
Author(s):  
R. L. Meyer ◽  
G. Leclert ◽  
M. Felden
Keyword(s):  
Magnetic Field ◽  
Cross Section ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Scattered Wave ◽  
Magnetic Field Direction ◽  
Section Efficace ◽  
Experimental Conditions ◽  
Champ Magnétique ◽  
The Magnetic Field

We study the influence of the magnetic field intensity and direction with respect to the wave vector on the scattering cross-section resonances. We deduce the best experimental conditions for studying these resonances. It is shown that the spectrum modulation of the scattered wave can be used to measure, in some configurations, the confining magnetic field direction.

Design and Fabrication of a Micro-Actuator Based on Electromagnetic Membrane Device

2012 ◽  
Vol 488-489 ◽  
pp. 1451-1456
Author(s):  
Rong Hua Ma ◽  
Jian Hao Zhong
Keyword(s):  
Magnetic Field ◽  
Field Intensity ◽  
Magnetic Field Intensity ◽  
Physical Size ◽  
Ac Power ◽  
Coil Structure ◽  
Electro Magnetic ◽  
Ndfeb Permanent Magnet ◽  
The Magnetic Field ◽  
A Current

The purpose of this study is to develop a micro electro-magnetic actuator manufactured by MEMS-based fabrication and electroplating techniques. This actuator presented a novel technique in the electromagnetic fabrication and smaller physical size than the traditional counterparts for micro actuators and provides a faster response time and lower cost. A micro coil structure is released from FeCl3 etchant and bonded on a thin film (Parafilm”M”, Pechiney Plastic Packaging Inc.) to achieve an actuator-membrane structure. When an external AC power is applied to a micro coil, a magnetic field is created to attract and repel through an NdFeB permanent magnet, and the displacement of the membrane is increased as a current of AC power. The results show the measured magnetic field intensity weakens as the distance between the coil and the Gauss meter probe increases. However, it is observed that the magnetic field intensity does not increase linearly with the number of series coils, which is due to the distance between series coils.

Sign in / Sign up

Export Citation Format

Share Document