Magnetic Properties of Manganese-Titanium Substituted Barium Ferrite Ba(TiMn)xFe12-2xO19(x=0.0, 0.5, 1.0, 1.5, 2.0) Prepared by the Molten Salt Method

2010 ◽  
Vol 434-435 ◽  
pp. 240-243 ◽  
Author(s):  
Hai Feng Li ◽  
Rong Zhou Gong ◽  
Hao Luo ◽  
Jun Zhou ◽  
Li Ren Fan ◽  
...  
Keyword(s):  
Hysteresis Loop ◽  
Molten Salt ◽  
Barium Ferrite ◽  
Magnetic Hysteresis ◽  
Magnetic Hysteresis Loop ◽  
Electromagnetic Properties ◽  
Molten Salt Method ◽  
Frequency Range ◽  
X Ray Diffraction ◽  
X Ray

M-type hexaferrites Ba(TiMn)xFe12-2xO19 (x=0 to 2) powders were synthesized by molten salt method. X-ray diffraction, scanning electron microscope and vibrating sample magnetometer were used to analyze the structures and electromagnetic properties. The results showed that, the magnetoplumbite structures for all samples were formed. Magnetic hysteresis loop measurements of the Ba(TiMn)xFe12-2xO19, exhibitted that the saturation magnetization (Ms), the remanent magnetization (Mr) and the coercitivity (Hc) of compounds depended strongly on the chemical composition of materials. The maxium values of Ms (52.68emu/g) and Mr (32.89emu/g) of the compounds were found at x=0.5; however, the values of Hc and the areas of magnetic hysteresis loop of compounds decreased with increasing the value of x. The Ba(TiMn)1.5Fe9O19/paraffin wax composites containing 40vol% of doped barium ferrite exhibitted good absorption performances in the frequency range of 2–14 GHz.

Influence of Zinc-Zirconium Substitution on Magnetic Properties of Ba(ZnZr)xFe12-2xO19 Hexaferrite Prepared by the Molten Salt Method

2009 ◽  
Vol 79-82 ◽  
pp. 2071-2074 ◽  
Author(s):  
Hai Feng Li ◽  
Rong Zhou Gong ◽  
Xian Wang ◽  
Li Ren Fan ◽  
Gang He ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Molten Salt ◽  
Magnetic Hysteresis ◽  
Magnetic Hysteresis Loop ◽  
Chemical Compositions ◽  
Molten Salt Method ◽  
Vibrating Sample Magnetometer ◽  
Hexagonal Ferrites ◽  
X Ray Diffraction ◽  
X Ray

M-type hexaferrites Ba(ZnZr)xFe12-2xO19 (x=0, 0.5, 1.0, 1.5) powders, have been synthesized by molten salt method, where x varies from 0 to 1.5 in steps of 0.5. X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and vibrating sample magnetometer(VSM) were used to analyze the structures and magnetic properties. The results showed that, the magnetoplumbite structures for all samples calcining at 1100°C have been formed. The magnetic hysteresis loop measurements of the hexagonal ferrites powders showed that the saturation magnetization (Ms), the remanent magnetization (Mr), and the coercitivity (Hc) of ferrites depend strongly on the chemical compositions of materials. The data showed that the max Hc was obtained when substitution of x=1.0 (Hc=63.9 Oe), while the best Ms was obtained when substitution of x=0.5 (Ms=54.02 emu/g). Zn and Zr substitutions greatly modified the magnetic properties of BaM hexaferrite.

Effects of Ba and Ti Codoping on Stoichiometric and Nonstoichiometric BiFeO3 Multiferroic Ceramics

2015 ◽  
Vol 815 ◽  
pp. 154-158 ◽  
Author(s):  
Xi Zhou ◽  
Yao Xiong ◽  
Yu Chong Pei ◽  
Wan Ping Chen
Keyword(s):  
Perovskite Phase ◽  
Magnetic Hysteresis ◽  
Low Frequency ◽  
Magnetic Hysteresis Loop ◽  
Solid State Reactions ◽  
Frequency Range ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrical And Dielectric Properties ◽  
Loop Measurement

Bi0.9Ba0.1Fe0.95O3 and Bi0.9Ba0.1FexTi0.05O3 (x=0.95, 0.925, 0.90) ceramics were prepared through conventional solid state reactions. X-ray diffraction analyses indicated that a high content of perovskite phase was obtained for all the four compositions. While the three (Ba,Ti)-codoped compositions all showed a higher resistivity than Bi0.9Ba0.1Fe0.95O3, and Bi0.9Ba0.1Fe0.925Ti0.05O3 had the best electrical and dielectric properties among the three (Ba,Ti)-codoped compositions, including the largest dielectric constant, the smallest dielectric loss at low frequency range, and the highest electrical resistivity. Magnetic hysteresis loop measurement revealed that the four compositions had similarly enhanced magnetic properties. It is concluded that much attention should be paid to fine composition adjustment when multiple elements are co-doped to BiFeO3 system.

Structural and Magnetic Properties of Nano Composite (Ni1-xSrx Fe12 O19) Prepared by Sol-gel

2021 ◽  
Vol 19 (10) ◽  
pp. 20-28
Author(s):  
Dhifaf Hussain Hassan ◽  
Sabah Jalal Fathi
Keyword(s):  
Magnetic Properties ◽  
Hysteresis Loop ◽  
Quaternary Structure ◽  
Sol Gel ◽  
Magnetic Hysteresis ◽  
Magnetic Hysteresis Loop ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
Two Phases ◽  
Hematite Fe2o3

The compound was prepared by sol-gel method for spontaneous combustion with certain weight ratios (x=0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9), the samples were calcined at a temperature (900oC) for a period of two hours(2h), then studied its structural and magnetic properties.one of the most prominent results that we obtained from the X-ray diffraction technique (XRD) is that compound has several phases. Where the sample (NiFe2O4) appeared to be polycrystalline and the dominant phase in it is the cubic phase, while the other phase is (Hematite)(Fe2O3) A crystal structure rhomboid (Rhombohedral), in addition to these two phases, the phase with the existing quaternary structure appeared (Sr2Fe2O5) its called (Orthorhombic). The results of the magnetic properties that were obtained through the (VSM) device, and one of the most important of these properties is the magnetic hysteresis loop by analyzing the magnetic hysteresis loop at (x=0.3), where the least area of the hysteresis loop or the least width of the hysteresis loop One of the most important parameters of the magnetic properties is the saturation magnetism (μS) and its value ranges from (19.76-3.86) (emu/gr), the highest value was at (X=0.3) and its value is (19.76emu/gr) and in general its value decreases with increasing concentration of strontium. The residual magnetism (Mr) ranges between (7.45-1.58) (emu/gr), where it reached its highest value at (x=0.3) and its value is (7.45emu/gr), and generally its value decreases with increasing concentration of strontium. In addition to that, there is another parameter which is coercion or Magnetic coercivity (Hc) ranges in value (1751.104-209.26) (Oe), reaching its lowest value at (x=0.3), and then increases with increasing strontium concentration until it reaches its highest value at (x=0.9), where it reached its value is (1751.104Oe). The square rate represented by the symbol (μi) has high values. This means that there is a mutual coupling between the soft and hard magnetic phases, which was the highest value at (x=0.3) and its value is (4.93).

Morphology and Magnetic Properties of NiCuZn Ferrite Synthesized by Solid-Molten Salt Method

2013 ◽  
Vol 873 ◽  
pp. 24-29 ◽  
Author(s):  
Jing Feng ◽  
Tian Di Liu ◽  
Yan Chen ◽  
Yu Ting Wang ◽  
Yue Ming Ren ◽  
...  
Keyword(s):  
Molten Salt ◽  
Molten Salt Method ◽  
Growing Up ◽  
Vibrating Sample Magnetometer ◽  
Structure And Properties ◽  
X Ray Diffraction ◽  
Exchange Effect ◽  
X Ray ◽  
Cu Content ◽  
Nicuzn Ferrite

Cu doped NiCuZn ferrite Ni0.4-xCuxZn0.6Fe2O4(x=0.16~0.28) have been prepared by the solid-molten salt method using NaCl as flux. The structure and properties were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and vibrating sample magnetometer (VSM) techniques. It is found that addition of Cu2+results in the particles size growing up because of the tend of crystal structure to be a normal Zn ferrite.TheMsvalues of NCZF are decrease gradually with increasing of Cu content. Curie temperature (Tc) increases with Cu2+content in the range of x<0.20, and then decreasing rapidly. This can be ascribed to that the lower magnetization moment Cu2+ion amount of B-site increasing leads to weaker super-exchange effect.

Cathode Material Li [Li0.2 Mn0.44Ni0.18Co0.18]O2 Synthesized by Molten Salt Method

2013 ◽  
Vol 690-693 ◽  
pp. 981-984
Author(s):  
Guang Xin Fan ◽  
Hui Lian Li ◽  
Shu Pu Dai ◽  
Chuan Xiang Zhang ◽  
Xue Mao Guan ◽  
...  
Keyword(s):  
Molten Salt ◽  
Specific Area ◽  
Constant Current ◽  
Molar Ratio ◽  
Molten Salt Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Structures And Properties ◽  
Constant Current Charge

In this paper, LiOH·H2O and Li2CO3, which were widely used in industry and (Mn0.533Co0.233Ni0.233) (OH)2prepared by ourselves selected as starting materials, series materials of lithium-rich layered material Li [Li0.2Mn0.44Ni0.18Co0.18]O2were obtained by a molten salt method. Their structures and properties of the materials were investigated by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and constant current charge/discharge methods. The effects of different LiOH and Li2CO3molar ratios on the Li [Li0.2Mn0.44Ni0.18Co0.18]O2structures and properties were characterized. The results of the experiments indicate that The structures of the material such as crystal structure, the specific area, particle size distribution, tap densities were controlled by adjusting the proportion of the two lithium sources. Forthermore , when the molar ratio of LiOH and Li2CO3was 3:7, the maximum discharge capacity (214.77 mAhg-1) of the cathode was obtained.

scholarly journals Reducing the ordering temperature of FePt nanoparticles by Cu additive and alternate reduction method

2017 ◽  
Vol 07 (06) ◽  
pp. 1750039
Author(s):  
Fang Wang ◽  
Xiaojun Bai
Keyword(s):  
Annealing Temperature ◽  
Reduction Method ◽  
Magnetic Hysteresis ◽  
Magnetic Hysteresis Loop ◽  
Metal Salts ◽  
Fept Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Patterns ◽  
Cu Additive

(FePt)[Formula: see text]Cu[Formula: see text] nanoparticles were successfully prepared by alternate reduction of metal salts in aqueous medium. Detailed investigations on the correlation between the magnetic and structural properties of these nanoparticles are presented as a function of annealing temperature. Both the X-ray diffraction patterns and the magnetic hysteresis loop measurements show the existence of L10-FePt phase at a relative low annealing temperature. It is proved that the Cu additive and alternate reduction are very effective methods in reducing the ordering temperature of FePt nanoparticles.

Synthesis and Characterization of Magnesium Aluminate Spinel Porous Ceramics by Novel Molten Salt Method

2016 ◽  
Vol 697 ◽  
pp. 399-403 ◽  
Author(s):  
Xian Gong Deng ◽  
Jun Kai Wang ◽  
Hai Jun Zhang ◽  
Jiang Hao Liu ◽  
Shao Wei Zhang
Keyword(s):  
Molten Salt ◽  
Porous Ceramics ◽  
Magnesium Aluminate ◽  
Molten Salt Method ◽  
Magnesium Aluminate Spinel ◽  
X Ray Diffraction ◽  
Liquid Environment ◽  
X Ray

Magnesium aluminate spinel (MgAl2O4) porous ceramics were in-situ synthesized by heating the mixture of Al2O3 and MgCO3 with MgCl2 salt at 1400~1600 °C for 3 h, and then characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The morphology of as-prepared MgAl2O4 porous ceramics was dependent on the addition of MgCl2, and it indicated that the MgCl2 molten salt not only acted as a template for pore formation of the porous ceramics, but also provided a liquid environment for the synthesis of MgAl2O4.

Low-Temperature Molten Salt Synthesis of NiWO4 Nanoparticles

2011 ◽  
Vol 311-313 ◽  
pp. 545-548 ◽  
Author(s):  
Yu Jiang Wang ◽  
Yong Gang Wang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Molten Salt ◽  
Molten Salt Synthesis ◽  
Molten Salt Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Pure Phase

NiWO4 nanoparticles were successfully synthesized by a molten salt method at 270°C. The as-prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), and exhibited a pure phase NiWO4 with about 50 nm in particle size and uniform nearly-spherical particle shape.

Preparation and Electromagnetic Properties of Manganese Zinc Ferrite/Barium Ferrite Composite Materials

2012 ◽  
Vol 519 ◽  
pp. 215-219
Author(s):  
Quan Yuan ◽  
Wang Qun ◽  
Zhi Xue Qu ◽  
Zi Xin Gu ◽  
Tong Wu
Keyword(s):  
Composite Materials ◽  
Barium Ferrite ◽  
Zinc Ferrite ◽  
Spinel Phase ◽  
Electromagnetic Properties ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Manganese Zinc ◽  
Manganese Zinc Ferrite

Abstract: Manganese zinc ferrite/barium ferrite composite materials were prepared with various content of Z type barium ferrite (0, 10, 20 wt%) using solid state reaction method. The effect of the compositon on the microstructure and electromagnetic properties of the composites are investigated by means of X-ray diffraction, scanning electron microscope and impedance analyzer. The X-ray diffraction patterns reveal that W phase of barium ferrite instead of Z phase appears in the composite sintered as well as the spinel phase. Some small hexagonal grains were observed in the SEM images and the proportion increases with increasing content of barium ferrite. The cut-off frequencies of the composite systematically shift towards high frequency from 2.5 MHz to 32.6 MHz which is attributed to the increasing of W phase. The composites show a higher frequency for the maximum of the impedance as well as a higher value of the impedance at certain frequency which may be benefit for the application at GHz frequency range.

Synthesis of CdMoO4 Microcrystals by a Molten Salt Method

2012 ◽  
Vol 472-475 ◽  
pp. 2452-2457 ◽  
Author(s):  
Xiao Hui Jiang ◽  
Jun Feng Ma ◽  
Jie Cheng ◽  
Jing Rui Fang ◽  
Yong Sun
Keyword(s):  
Molten Salt ◽  
Molten Salt Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron Microcopy ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Scanning Electron Microcopy ◽  
Pure Phase ◽  
Scanning Electron

Cadmium molybdate (CdMoO4) nanoparticles, cube-like crystallites and octahedral microparticles have been successfully synthesized by a molten salt method at 270°C. The structure, morphology and luminescent property of the resultant powders were characterized by X-ray diffraction (XRD), transmission electron microcopy (TEM), scanning electron microcopy (SEM), and photoluminescence (PL), respectively. The resultant samples are a pure phase of CdMoO4 and without any impurities. PL spectra results show that the optical properties of CdMoO4 particles are strongly relied on their morphologies.

Sign in / Sign up

Export Citation Format

Share Document