Measurement of Vehicle Tire Footprint Pattern and Pressure Distribution Using Piezoresistive Force Sensor Mat and Image Analysis

2010 ◽  
Vol 437 ◽  
pp. 467-471 ◽  
Author(s):  
Rong Sheng Lu ◽  
Ning Liu ◽  
Xiao Huai Chen
Keyword(s):  
Image Processing ◽  
Image Analysis ◽  
Pressure Distribution ◽  
Digital Image Processing ◽  
Force Sensor ◽  
High Accuracy ◽  
Envelope Curve ◽  
Calculation Algorithm ◽  
Measurement Principle ◽  
Novel Method

In this paper, a novel method to measure the footprint pattern of a vehicle tire and its pressure distribution will be put forward. The measurement principle will be presented. The automatic digital image processing methods of the footprint pattern and pressure distribution images, which are used to characterize the footprint pattern, are described. Especially, a novel envelope curve calculation algorithm for finding a pattern boundary is introduced. The experimental results have shown that the methods mentioned in the paper are of robustness and high accuracy.

Realization of Car’s Frontal Projected Area Based on OpenCV

2013 ◽  
Vol 300-301 ◽  
pp. 1673-1676 ◽  
Author(s):  
Chun Bo Dong ◽  
Xing Jun Hu ◽  
Yan Wang ◽  
Li Min Fu
Keyword(s):  
Image Processing ◽  
Digital Image Processing ◽  
Digital Image ◽  
High Accuracy ◽  
Median Filtering ◽  
Contour Extraction ◽  
Projected Area ◽  
Automotive Body ◽  
Body Development ◽  
Image Processing Algorithms

Digital image processing technology applied to the field of automotive body development, especially the aerodynamic development of the external shape of automobile. This method and its corresponding software improve the efficiency compared with other traditional fluid software tools in processing the car’s front area, reduce artificial error, and have high accuracy. Digital image processing algorithms used in this article includes Image Gray, Median Filtering, Image Segmentation, Contour Extraction and so on.

The Circle-End-Face Centering Device Based on Image Processing

2014 ◽  
Vol 926-930 ◽  
pp. 3447-3450
Author(s):  
Yong Bo Li ◽  
Yun Zhao Xu ◽  
Jia He
Keyword(s):  
Image Processing ◽  
Digital Image Processing ◽  
High Stability ◽  
Least Square Method ◽  
High Accuracy ◽  
Concentric Circle ◽  
Least Square ◽  
Programmable Logic ◽  
Edge Extraction ◽  
Stability And Accuracy

The circle-end-face centering device which is in the base of image processing accomplishes the center of the cylinders end face by digital image processing. Through edge extraction and doing the matching in the calculation of the least square method, the coordinate of the central of the circle can be calculated. At last, the drill will be moved to the central of the circle and do the punching by the actuator. This equipment is in the high accuracy and speed compared with the traditional way and the concentric circle laser of marking with the center. Meanwhile, the actuator consists of the programmable logic controller, touch panel and servo drivers which is in the high stability and accuracy. Certainly it is easy to be controlled by the method.

scholarly journals Eye Detection System Based on Image Processing for Vehicle Safety

2020 ◽  
Vol 19 (01) ◽  
pp. 11-22
Author(s):  
Almira Budiyanto ◽  
Abdul Manan ◽  
Elvira Sukma Wahyuni
Keyword(s):  
Image Processing ◽  
Light Intensity ◽  
Digital Image Processing ◽  
Traffic Accidents ◽  
Detection System ◽  
High Accuracy ◽  
Vehicle Safety ◽  
Eye Detection ◽  
Eye Blinks ◽  
The Face

The more advanced the technology and the greater the community's need to carry out activities every day, the number of vehicles on the highway is getting crowded. From year to year, the greater the level of traffic accidents caused by many factors, among the usual reasons is the loss of awareness of the driver when driving a vehicle especially drowsiness. One of the drowsiness parameters is the frequency eye blinks. Therefore, to get the drowsiness symptoms, the purpose of this research is to detect the eye blinks, which in turn reduce the level of accidents by detecting sleepy eyes based on digital image processing. The method used to detect both eyes is the Viola-Jones method. The detection of both eyes can also acquire the duration of closed eyes and the number of eye blinks. A person can be said to be sleepy by means of sleepiness parameters determined by a study. The research shows that detection of eye blinks using the Viola-Jones method has a fairly high accuracy of up to 84.72% if the face condition is upright and tilted no more than 45 degrees. Another conclusion is that eye detection and driver detection are more effective at certain light intensity values which are around 2-33 lux.

Research on advanced methods of electrochemiluminescence detection combined and optical imaging analysis for the detection of sulfonamides

The Analyst ◽  
2021 ◽  
Author(s):  
Chengxin Liu ◽  
Dianyou Song ◽  
Zhengchun Yang ◽  
Zhiyong Wang ◽  
peng pan ◽  
...  
Keyword(s):  
Image Processing ◽  
Optical Imaging ◽  
Digital Image Processing ◽  
Digital Image ◽  
Imaging Analysis ◽  
Novel Method

In this study, a novel method that combines electrochemiluminescence (ECL) analysis and digital image processing was developed for the detection of sulfonamides. This method is based on the ECL system...

A Technology of Composite Real-Time Image Processing of Profile Measurement

2011 ◽  
Vol 383-390 ◽  
pp. 4884-4888
Author(s):  
Tian Ze Li ◽  
Ke Ping Hu ◽  
Luan Hou ◽  
Chuan Jiang ◽  
Heng Wei Lu ◽  
...  
Keyword(s):  
Image Processing ◽  
Image Analysis ◽  
Real Time ◽  
Laser Scanning ◽  
High Accuracy ◽  
Profile Measurement ◽  
Real Time Image Processing ◽  
Real Time Image ◽  
Image Area ◽  
Time Image

This paper, innovative approaches are based on laser scanning and image analysis, presents an efficient composite technique for object profile extraction with real-time image processing. High throughput is obtained by algorithmic prefiltering to restrict the image area, while high accuracy is achieved by neural recontruction of the profile.

Digital Image Analysis of the Rolls During Production of Aluminum Foils

2001 ◽  
Author(s):  
E. Marchetti ◽  
F. Venlali
Keyword(s):  
Image Processing ◽  
Image Analysis ◽  
Statistical Analysis ◽  
Digital Image Processing ◽  
Digital Image ◽  
Digital Image Analysis ◽  
Longitudinal Direction ◽  
Axial Direction ◽  
Production Campaign ◽  
Roughness Measurements

Abstract The morphological appearance of the cylinders and of the laminates have been assessed by digital image processing performed during a number of production campaign of aluminum foils. The statistical analysis performed on the cylinders have shown that it is possible to evidence the modifications induced by the rolling operation. Such modifications have been found both in axial direction of the cylinders and in the longitudinal direction of the laminates. Yet, roughness measurements performed on the cylinders did not show any variation along the axial direction.

Local Statistic Enhancement of Digital Image Based on Genetic Algorithm

2013 ◽  
Vol 427-429 ◽  
pp. 1836-1840 ◽  
Author(s):  
Yong Zhuo Wu ◽  
Zhen Tu ◽  
Lei Liu
Keyword(s):  
Genetic Algorithm ◽  
Image Processing ◽  
Image Enhancement ◽  
Digital Image Processing ◽  
Digital Image ◽  
Experimental Results ◽  
Computer Application ◽  
Novel Method ◽  
New Research

Iamge repair using the digital image processing technology has become a new research point in computer application. A novel method of local statistic enhancement based on genetic algorithm is proposed in this paper for the image enhancement. The modified amplified function are used as the jugement criterion, and the optimal paremeters are searched by the genetic algorithm. Experimental results show that the quality of images is improved dramatically by using this method.

Sign in / Sign up

Export Citation Format

Share Document