Seismic Performance Analysis of a Multi-Span Continuous Girder Bridge under Multi-Excitation

2013 ◽  
Vol 540 ◽  
pp. 141-152
Author(s):  
Hang Sun ◽  
De Jun Wang ◽  
Yong Li
Keyword(s):  
Seismic Response ◽  
Time History ◽  
Response Analysis ◽  
Continuous Beam ◽  
Space Correlation ◽  
Long Span Bridges ◽  
Girder Bridges ◽  
Long Span ◽  
Continuous Girder Bridge ◽  
Simple Support

Although the seismic response analysis under the multi-excitation was widely focused on the long-span flexible bridges, it is still necessary to pay more attention to this point of continuous girder bridges since the dynamic behavior of this type of bridges are different with either long-span bridges or simple support bridges. Based on the nonlinear dynamic time history analysis, a four-span continuous beam FEM was built, and the effect of excitation types and structure size on seismic response was studied. And results indicate that the structural performance of continuous girder bridges is sensitive with the space correlation of different location of seismic excitation. So its necessary to consider the space effect of excitation while carrying out a seismic design of continuous beam.

Seismic Response Analysis of Free Long-Span Submarine Flexible Pipelines under Earthquakes

2014 ◽  
Vol 580-583 ◽  
pp. 1704-1707
Author(s):  
Yu Lin Deng ◽  
Yu Bian ◽  
Fan Lei
Keyword(s):  
Seismic Response ◽  
Fluid Structure Interaction ◽  
Time History ◽  
Response Analysis ◽  
Seismic Safety ◽  
Peak Displacement ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Finite Element Software ◽  
Long Span

Submarine pipelines are described as the lifeblood of offshore oil and it is crucial to ensure the seismic safety of the submarine pipelines. Based on the fluid-structure interaction numerical analysis method and by using finite element software ADINA, the analysis models of the free long-span submarine flexible pipelines under earthquakes were established. By employing dynamic time-history method, the influences of fluid-structure interaction on the seismic response of the submarine pipelines were researched. The results showed that the peak normal stress and the peak displacement of submarine pipelines’ mid-span considering the influences of the fluid-structure interaction are greater than those without considering the influences, and the influences of the fluid-structure interaction on the seismic response of the submarine pipelines will increase with the increase of the submarine pipelines‘ diameter.

Damping Value for Seismic Response Analysis of Long-Span Bridges

2011 ◽  
Vol 90-93 ◽  
pp. 1522-1525
Author(s):  
Ling Ling Yu
Keyword(s):  
Seismic Response ◽  
Dynamic Properties ◽  
Element Model ◽  
Response Analysis ◽  
Seismic Response Analysis ◽  
Long Span Bridges ◽  
Rayleigh Damping ◽  
Long Span ◽  
Damping Theory ◽  
The Finite Element Model

The current problems on damping in seismic response analysis of bridges is presented. The Rayleigh damping theory is simply introduced in this paper. Taking the Longtan River Bridge for instance, the finite element model of Longtan River Bridge (left line) is established. Then, the dynamic properties of the bridge is analyzed. Based on this, the Rayleigh damping constants and in an ANSYS dynamic analysis are obtained.

Seismic Response Analysis of Partial Curve Long-Span Rigid Frame Bridge with Super High Pier

2011 ◽  
Vol 308-310 ◽  
pp. 1314-1321
Author(s):  
Yang Liu ◽  
Da Wang ◽  
Min Hai Chen
Keyword(s):  
Seismic Response ◽  
Seismic Performance ◽  
Great Influence ◽  
Time History ◽  
Dynamical Stability ◽  
Response Analysis ◽  
Long Span ◽  
Rigid Frame ◽  
High Pier ◽  
Rigid Frame Bridge

Based on the time history analysis method, some curve long-span rigid frame bridge with super high pier in Sichuan was taken as the studying case, and a studying of natural vibration characteristics and seismic response. Comparative study was emphasis carried on seismic performance between the partial curve bridge and the straight. In addition, the exhaustive research to about between crosswise relation to the structure overall rigidity contribution and to the structure and the seismic performance influence is conducted. The conclusion of the study shows that the seismic performance of the straight long-span rigid frame bridge with super high pier is surpassing the curve bridge. The curve linear has little influence to the base frequency of this kind of structure, and The rigidity is mainly effected by the bridge pier. If additionally builds the crosswise relation between the structure, the dynamic characteristic of the structure will be improved greatly. The height of this type bridge has great influence on the dynamical stability, the height is lower and the dynamical stability is better, which is more advantageous to the structure seismic behavior.

scholarly journals Near-Fault Seismic Response Analysis of Bridges Considering Girder Impact and Pier Size

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 704
Author(s):  
Wenjun An ◽  
Guquan Song ◽  
Shutong Chen
Keyword(s):  
Seismic Response ◽  
Bending Moment ◽  
Expansion Method ◽  
Response Analysis ◽  
Seismic Action ◽  
Transient Wave ◽  
Cross Sectional ◽  
Displacement Response ◽  
Near Fault ◽  
Continuous Girder Bridge

Given the influence of near-fault vertical seismic action, we established a girder-spring-damping-rod model of a double-span continuous girder bridge and used the transient wave function expansion method and indirect modal function method to calculate the seismic response of the bridge. We deduced the theoretical solution for the vertical and longitudinal contact force and displacement response of the bridge structure under the action of the near-fault vertical seismic excitation, and we analyzed the influence of the vertical separation of the bridge on the bending failure of the pier. Our results show that under the action of a near-fault vertical earthquake, pier-girder separation will significantly alter the bridge’s longitudinal displacement response, and that neglecting this separation may lead to the underestimation of the pier’s bending damage. Calculations of the bending moment at the bottom of the pier under different pier heights and cross-sectional diameters showed that the separation of the pier and the girder increases the bending moment at the pier’s base. Therefore, the reasonable design of the pier size and tensile support bearing in near-fault areas may help to reduce longitudinal damage to bridges.

A Development of the Visco-Elastic Damper for Timber Structure and a Suggestion of the Technological Design Assistance System

2013 ◽  
Vol 778 ◽  
pp. 714-721
Author(s):  
Katsuhiko Kohara ◽  
Takeshi Nomura ◽  
Kazuyoshi Koumoto
Keyword(s):  
Seismic Response ◽  
Elastic Body ◽  
Structural Model ◽  
Time History ◽  
Timber Structure ◽  
Response Analysis ◽  
Frame Design ◽  
Timber Frame ◽  
Loading Tests ◽  
Controlled Structure

Our research team developed a brace type and an angle brace type of the visco-elastic damper on seismic-response controlled structure for timber structure. We performed various dependence evaluations by the materials examination of the styrene olefin-based visco-elastic body which we developed newly. We made a structural model using the performance that loading tests in timber frame. We inspected the validity of the structural model. In addition, we built a technical support system for damper setting by the time history response analysis so that a general design architect was easy to use the damper. We could express dynamics properties of visco-elastic body properties by Voigt model, and the structural model almost accorded with an examination property value. We made a structural model of the whole frame system by Kb of installation rigidity obtained from loading tests in timber frame. Because a design level almost accorded with experimental value, the validity of the frame design on seismic-response controlled structure in consideration of the dependence (distortion, frequency, temperature) of the visco-elastic body was confirmed. This visco-elastic damper on seismic-response controlled structure acquired minister authorization of Ministry of Land, Infrastructure and Transport. In addition, this damper acquired the certification of the Japan Building Disaster Prevention Association.

Seismic Response Analysis of CFST Arch Bridge Considering Input Earthquake Characteristics

2011 ◽  
Vol 255-260 ◽  
pp. 962-966
Author(s):  
Fan Xing ◽  
Lin Zhao ◽  
Ya Zhe Xing
Keyword(s):  
Seismic Response ◽  
Research Result ◽  
Steel Tube ◽  
Response Analysis ◽  
Vibration Period ◽  
Arch Bridge ◽  
Near Fault ◽  
Long Span ◽  
Cfst Arch Bridge ◽  
Out Of Plane

In view of huge destructibility of the near-fault ground motions, structures with long natural vibration period are liable to fall into nonlinear reaction stage. Based on a full understanding of the near-fault seismic spectrum characteristics, the out-of-plane seismic response of a long span concrete-filled steel tube (CFST) arch bridge was studied in depth, and the research result could offer a reference for near-fault aseismic design.

Seismic Response Analysis on Flat L-Shaped Frame Structure Based on FEM

2012 ◽  
Vol 166-169 ◽  
pp. 2138-2142
Author(s):  
Hui Min Wang ◽  
Liang Cao ◽  
Ji Yao ◽  
Zhi Liang Wang
Keyword(s):  
Seismic Response ◽  
Three Dimensional ◽  
Time History ◽  
Frame Structure ◽  
Response Analysis ◽  
Reinforced Concrete Frame ◽  
Seismic Response Analysis ◽  
Concrete Frame ◽  
History Analysis ◽  
Complex Features

For the complex features in the form of a flat L-shaped reinforced concrete frame structure, the three dimensional FEM model of the structure was established in this paper, and the dynamic characteristics of the structure was analyzed, the participation equivalent mass of every mode’s order was obtained. Seismic response analysis for the structure was carried out with modal decomposition spectrum method and time history analysis method, the weak layer of the structure was pointed out and the reference for the structural design was provided.

Sign in / Sign up

Export Citation Format

Share Document