Study on the Influences of Ultrasonic Conditions on the Dispersion of Multi-Walled Carbon Nanotubes in Reinforced Epoxy

2013 ◽  
Vol 561 ◽  
pp. 47-53
Author(s):  
Yu Mei Ding ◽  
Jian Qiang Wang ◽  
Ying An ◽  
Jian Bo Shao ◽  
Kun Ma ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Epoxy Resin ◽  
Operating Conditions ◽  
Suspension Stability ◽  
Ultrasonic Power ◽  
Ultrasonic Time ◽  
Resin Solution ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Ultrasonic Conditions

Absrtract. In this paper, the method of ultrasonic vibration in preparation of multi-walled carbon nanotubes(MWCNTs)/epoxy resin composites was studied. Suspension specimens of MWCNTs/epoxy resin solution prepared by different ultrasonic conditions were compared to find out the influences of operating conditions on dispersion properties. In this study, transmission electron microscopes(TEM) were used to characterize the morphology of the blends and suspension stability was used to evaluate the stability of blends. The results showed that ultrasonic power, ultrasonic time and material quantity have great effect on the dispersion of MWCNTs in epoxy resin solution. Increasing ultrasonic power and time can improve dispersion of MWCNTs, and decreasing material quantity within an appropriate range was helpful to disperse MWCNTs into epoxy resin solution. The results of suspension stability were very similar with TEM results, which demonstrate that suspension stability of MWCNTs/epoxy resin blending could be used as an assistant method to characterize the dispersion of MWCNTs in epoxy resin.

scholarly journals The effect of the surface modification of carbon nanotubes on their dispersion in the epoxy matrix

2011 ◽  
Vol 13 (2) ◽  
pp. 62-69 ◽  
Author(s):  
Maria Wladyka-Przybylak ◽  
Dorota Wesolek ◽  
Weronika Gieparda ◽  
Anna Boczkowska ◽  
Ewelina Ciecierska
Keyword(s):  
Carbon Nanotubes ◽  
Surface Modification ◽  
Epoxy Resin ◽  
Epoxy Matrix ◽  
Mechanical Mixing ◽  
Weight Percentage ◽  
Homogeneous Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Mixing Method ◽  
Walled Carbon Nanotubes

The effect of the surface modification of carbon nanotubes on their dispersion in the epoxy matrix Functionalization of multi-walled carbon nanotubes (MWCNTs) has an effect on the dispersion of MWCNT in the epoxy matrix. Samples based on two kinds of epoxy resin and different weight percentage of MWCNTs (functionalized and non-functionalized) were prepared. Epoxy/carbon nanotubes composites were prepared by different mixing methods (ultrasounds and a combination of ultrasounds and mechanical mixing). CNTs modified with different functional groups were investigated. Surfactants were used to lower the surface tension of the liquid, which enabled easier spreading and reducing the interfacial tension. Solvents were also used to reduce the liquid viscosity. Some of them facilitate homogeneous dispersion of nanotubes in the resin. The properties of epoxy/nanotubes composites strongly depend on a uniform distribution of carbon nanotubes in the epoxy matrix. The type of epoxy resin, solvent, surfactant and mixing method for homogeneous dispersion of CNTs in the epoxy matrix was evaluated. The effect of CNTs functionalization type on their dispersion in the epoxy resins was evaluated on the basis of viscosity and microstructure studies.

scholarly journals Enhancement of out-of-plane mechanical properties of carbon fiber reinforced epoxy resin composite by incorporating the multi-walled carbon nanotubes

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Seyed Ali Mirsalehi ◽  
Amir Ali Youzbashi ◽  
Amjad Sazgar
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Test ◽  
Epoxy Resin ◽  
Laminate Composite ◽  
Filament Winding ◽  
Hybrid Nanocomposites ◽  
Out Of Plane ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

AbstractIn this study, epoxy hybrid nanocomposites reinforced by carbon fibers (CFs) were fabricated by a filament winding. To improve out-of-plane (transverse) mechanical properties, 0.5 and 1.0 Wt.% multi-walled carbon nanotubes (MWCNTs) were embedded into epoxy/CF composites. The MWCNTs were well dispersed into the epoxy resin without using any additives. The transverse mechanical properties of epoxy/MWCNT/CF hybrid nanocomposites were evaluated by the tensile test in the vertical direction to the CFs (90º tensile) and flexural tests. The fracture surfaces of composites were studied by scanning electron microscopy (SEM). The SEM observations showed that the bridging of the MWCNTs is one of the mechanisms of transverse mechanical properties enhancement in the epoxy/MWCNT/CF composites. The results of the 90º tensile test proved that the tensile strength and elongation at break of nanocomposite with 1.0 Wt.% MWCNTs improved up to 53% and 50% in comparison with epoxy/CF laminate composite, respectively. Furthermore, the flexural strength, secant modulus, and elongation of epoxy/1.0 Wt.% MWCNT/CF hybrid nanocomposite increased 15%, 7%, and 9% compared to epoxy/CF laminate composite, respectively.

Characterization of Mechanical and Viscoelastic Properties of SC-15 Epoxy Nanocomposites Reinforced With Multi-Walled Carbon Nanotubes, Nanoclay and Binary Nanoparticles

2014 ◽  
Author(s):  
Tanjheel H. Mahdi ◽  
Mohammad E. Islam ◽  
Mahesh V. Hosur ◽  
Alfred Tcherbi-Narteh ◽  
S. Jeelani
Keyword(s):  
Carbon Nanotubes ◽  
Epoxy Resin ◽  
Viscoelastic Properties ◽  
Flexural Modulus ◽  
Epoxy Nanocomposites ◽  
Multiwalled Carbon ◽  
Epoxy Resin System ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Binary Nanoparticles

Mechanical and viscoelastic properties of polymer nanocomposites reinforced with carboxyl functionalized multiwalled carbon nanotubes (COOH-MWCNT), montmorillonite nanoclays (MMT) and MWCNT/MMT binary nanoparticle were investigated. In this study, 0.3 wt. % of COOH-MWCNT, 2 wt. % of MMT and 0.1 wt. % COOH-MWCNT/2 wt. % MMT binary nanoparticles by weight of epoxy were incorporated to modify SC-15 epoxy resin system. The nanocomposites were subjected to flexure test, dynamic mechanical and thermomechanical analyses. Morphological study was conducted with scanning electron microscope. Addition of each of the nanoparticles in epoxy showed significant improvement in mechanical and viscoelastic properties compared to those of control ones. But, best results were obtained for addition of 0.1% MWCNT/2% MMT binary nanoparticles in epoxy. Nanocomposites modified with binary nanoparticles exhibited about 20% increase in storage modulus as well as 25° C increase in glass transition temperature. Flexural modulus for binary nanoparticle modified composites depicted about 30% improvement compared to control ones. Thus, improvement of mechanical and viscoelastic properties was achieved by incorporating binary nanoparticles to epoxy nanocomposites. The increase in properties was attributed to synergistic effect of MWCNTs and nanoclay in chemically interacting with each other and epoxy resin as well as in arresting and delaying the crack growth once initiated.

Sign in / Sign up

Export Citation Format

Share Document